Owner's Manual

MTC-58
TROUBLE DIAGNOSIS
Revision: March 2005 2005 Altima
8. CHECK CIRCUIT CONTINUITY BETWEEN BLOWER MOTOR AND FAN CONTROL AMP.
1. Turn ignition switch OFF.
2. Disconnect front air control connector.
3. Check continuity between blower motor harness connector M62
terminal 2 (L/W) and fan control amp. harness connector M64
terminal 3 (L/W).
OK or NG
OK >> Check blower motor. Refer to MTC-58, "Blower Motor" .
1. If NG, replace blower motor.
2. Confirm that blower motor operation is normal.
NG >> Repair harness or connector.
COMPONENT INSPECTION
Blower Motor
Confirm smooth rotation of the blower motor.
● Ensure that there are no foreign particles inside the intake unit.
Terminals
Continuity
Connector -
Ter minal
Wire color
Connector -
Terminal
Wire color
M62-2 L/W M64-3 L/W Yes
WJIA0857E
WJIA0059E