Owner's Manual

TRANSAXLE ASSEMBLY
MT-101
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
2. Install the outer race onto the differential side bearing on the final gear side. Holding the outer race hori-
zontally by hand, rotate the final gear five times or more (for smooth movement of the bearing roller).
3. Using a depth micrometer and straight edge, measure the
dimension “L
2 ” between the differential side bearing outer race
and clutch housing end face as shown.
4. Install the selected adjusting shim and then the differential side
bearing outer race using Tool as shown.
MAINSHAFT END PLAY
● When adjusting the mainshaft end play, select the adjusting
shim for the mainshaft rear bearing. To select the adjusting
shim, measure clearance “M” between the transaxle case and
mainshaft rear bearing.
● Calculate the dimension “P” (thickness of adjusting shim) using
the following procedure to meet specification of end play for
mainshaft rear bearing.
CAUTION:
Only 1 adjusting shim can be selected.
SCIA1079E
Tool number : ST30720000 (J-25405)
WCIA0278E
End play : 0 - 0.06 mm (0 - 0.0024 in)
Dimension “P” = “M” – End play
“P” : Thickness of adjusting shim
“M” : Distance between mainshaft rear bearing
and transaxle case
SCIA0904E