Owner's Manual

MT-102
[RS6F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
Adjusting Shim
1. Install the mainshaft assembly to the clutch housing.
2. Install the snap ring to the transaxle case.
3. Install the transaxle case to clutch housing, and temporarily assemble them with bolts. Temporarily install
the snap ring to the mainshaft rear bearing.
4. Install the dial gauge to the snap ring access hole, and expand
the snap ring as shown. Lift the mainshaft assembly through the
control assembly installation hole, and push it against the tran-
saxle case. This state shall be defined as base. Moving the dis-
tance of the mainshaft assembly, with the snap ring installed on
the main bearing, becomes “M”.
REVERSE IDLER GEAR END PLAY
● When adjusting the reverse idler gear end play, select the
adjusting shim for the reverse idler gear. To select the correct
thickness of adjusting shim, measure the clearance between the
transaxle case and reverse idler gear.
● Calculate the dimension “Q” (thickness of adjusting shim) using
the following steps to adjust the end play of the reverse idler
gear to specification.
CAUTION:
Only 1 adjusting shim can be selected.
Shim thickness Part number
0.44 mm (0.0173 in)
0.48 mm (0.0189 in)
0.52 mm (0.0205 in)
0.56 mm (0.0220 in)
0.60 mm (0.0236 in)
0.64 mm (0.0252 in)
0.68 mm (0.0268 in)
0.72 mm (0.0283 in)
0.76 mm (0.0299 in)
0.80 mm (0.0315 in)
0.84 mm (0.0331 in)
0.88 mm (0.0346 in)
0.92 mm (0.0362 in)
0.96 mm (0.0378 in)
1.00 mm (0.0394 in)
1.04 mm (0.0409 in)
1.08 mm (0.0425 in)
32238 8H510
32238 8H511
32238 8H512
32238 8H513
32238 8H514
32238 8H515
32238 8H516
32238 8H517
32238 8H518
32238 8H519
32238 8H520
32238 8H521
32238 8H522
32238 8H523
32238 8H524
32238 8H560
32238 8H561
SCIA1017E
End play : 0.04 - 0.10 mm (0.0016 - 0.0039 in)
Dimension “Q” = (“Q
1 ” - “Q2 ”) – End play
“Q” : Thickness of adjusting shim
“Q
1 ” : Distance between transaxle case end face
and mounting face of adjusting shim
“Q
2 ” : Distance between clutch housing case end
face and end face of reverse idler gear
SCIA1007E