Owner's Manual

INPUT SHAFT AND GEARS
MT-107
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
2. Using a feeler gauge, measure clearance “B” at two or more
points diagonally opposite, and calculate mean value as shown.
Bearing
Check the item listed. If necessary, replace it with a new one.
● Damage and rough rotation of the bearing as shown.
ASSEMBLY
1. Install the 3rd needle bearing.
2. Install the 3rd input gear and 3rd baulk ring.
3. Install the spread spring, shifting insert, and a new 3rd-4th synchronizer hub onto the 3rd-4th coupling
sleeve.
CAUTION:
● Install with the orientation of the new synchronizer hub
as shown.
● Do not reuse the 3rd-4th synchronizer hub.
● Install with the orientation of the coupling sleeve as
shown.
Clearance “B”
Standard : 0.6 - 1.1 mm (0.024 - 0.043 in)
Limit value : 0.2 mm (0.008 in)
SCIA1084E
MTF0041D
SCIA0921E
SCIA0993E