Owner's Manual

MT-108
[RS6F51A]
INPUT SHAFT AND GEARS
Revision: March 2005 2005 Altima
● Do not hook the ends of the two spread springs (front
and back have two each) on the same shifting insert.
4. Install the 3rd-4th synchronizer assembly using Tool as shown.
CAUTION:
Align grooves of the shifting insert and 3rd baulk ring.
5. Install the 4th bushing using Tool as shown.
6. Install the 4th baulk ring.
7. Install the 4th input gear and 4th needle bearing.
8. Measure the dimension "C
2 " as shown. Select a suitable thrust
washer so that dimension "C
2 " satisfies the standard dimension
specification. Then install the thrust washer onto the input shaft.
CAUTION:
Only 1 thrust washer can be selected.
SCIA1083E
Tool number : KV40105710 ( — )
WCIA0284E
Tool number : KV40105710 ( — )
WCIA0285E
Standard for dimension "C2" : 154.7 - 154.8 mm
(6.091 - 6.094 in)
SCIA0925E