Owner's Manual

INPUT SHAFT AND GEARS
MT-109
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
Thrust Washer
9. Install the 5th bushing using Tool as shown.
10. Install the 5th needle bearing and 5th input gear.
11. Install the 5th baulk ring.
12. Install the synchronizer assembly onto a new 5th-6th synchro-
nizer hub.
CAUTION:
● Install with the orientation of the new synchronizer hub
as shown.
● Do not reuse the 5th-6th synchronizer hub.
● Do not to hook the ends of the 2 spread springs (front
and back have two each) on the same shifting insert.
13. Install the 5th-6th synchronizer hub assembly using Tool as
shown.
CAUTION:
Align the grooves of the 5th-6th shifting insert and the 5th-
6th baulk ring.
Thickness Part number Thickness Part number
3.84 mm (0.1512 in)
3.90 mm (0.1535 in)
3.96 mm (0.1559 in)
32347 8H500
32347 8H501
32347 8H502
4.02 mm (0.1583 in)
4.08 mm (0.1606 in)
4.14 mm (0.1630 in)
32347 8H503
32347 8H504
32347 8H505
Tool number : KV40105710 ( — )
WCIA0286E
SCIA0921E
SCIA1083E
Tool number : KV40105710 ( — )
WCIA0287E