Owner's Manual

MT-116
[RS6F51A]
MAINSHAFT AND GEARS
Revision: March 2005 2005 Altima
CAUTION:
● Install with the orientation of the new synchronizer hub
as shown.
● Do not reuse 1st-2nd synchronizer hub
● Install with the orientation of coupling sleeve as shown.
● Do not hook the ends of the two spread springs (front
and back have two each) on the same shifting insert.
5. Install the 1st gear synchronizer assembly onto the mainshaft,
and the synchronizer hub assembly onto the mainshaft using
Tool as shown.
CAUTION:
● Outer baulk ring, synchronizer cone, and inner baulk ring
on the 2nd gear-side must have been removed.
● Install the coupling sleeve with the proper orientation.
SCIA0921E
SCIA0989E
SCIA1083E
Tool number A: ST35321000 ( — )
B: KV38102510 (J-35870)
C: ST38220000 ( — )
WCIA0296E