Owner's Manual

MAINSHAFT AND GEARS
MT-117
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
6. Install the 2nd bushing using Tool as shown.
7. Install the outer baulk ring, synchronizer cone, and inner baulk
ring on 2nd gear-side.
8. Install the 2nd needle bearing and 2nd gear.
9. Install the 3rd main gear.
CAUTION:
Install the 3rd main gear with the orientation as shown.
10. Install the 3rd-4th mainshaft spacer.
11. Measure the dimension "C
1" . Select a suitable adjusting shim
so that the dimension "C
1 " satisfies the standard dimension
specification, and install it onto the mainshaft.
CAUTION:
Only 1 adjusting shim can be selected.
Adjusting Shim
Tool number A: ST35321000 ( — )
B: KV40105710 ( — )
WCIA0297E
Tool number A: ST35321000 ( — )
B: KV40105710 ( — )
WCIA0298E
Standard for
dimension "C
1"
: 173.85 - 173.95 mm (6.844 - 6.848 in)
SCIA0944E
Thickness Part number Thickness Part number
0.52 mm (0.0205 in)
0.60 mm (0.0236 in)
0.68 mm (0.0268 in)
0.76 mm (0.0299 in)
32238 8H500
32238 8H501
32238 8H502
32238 8H503
0.84 mm (0.0331 in)
0.92 mm (0.0362 in)
1.00 mm (0.0394 in)
1.08 mm (0.0425 in)
32238 8H504
32238 8H505
32238 8H506
32238 8H507