Owner's Manual

MT-118
[RS6F51A]
MAINSHAFT AND GEARS
Revision: March 2005 2005 Altima
12. Install the 4th main gear with the specified orientation, using
Tool as shown.
CAUTION:
Install the 4th main gear with the orientation as shown.
13. Install the 5th main gear with the specified orientation, using
Tool as shown.
CAUTION:
Install the 5th main gear with the orientation as shown.
14. Install the 5th-6th mainshaft spacer.
15. Install the 6th main gear using Tool as shown.
16. Select the 6th main adjusting shim and then install it onto the mainshaft.
● Calculate thickness “S” of 6th main adjusting shim by proce-
dure below so that end play dimension between 6th main
gear and mainshaft rear bearing becomes the dimension
specified.
CAUTION:
Only 1 adjusting shim can be selected.
Tool number A: ST33200000 (J-26082)
B: ST30901000 (J-26010-01)
WCIA0299E
Tool number A: ST33200000 (J-26082)
B: ST30901000 (J-26010-01)
WCIA0300E
Tool number A: ST33200000 (J-26082)
B: ST30901000 (J-26010-01)
WCIA0313E
End play : 0 - 0.1 mm (0 - 0.004 in)
Dimension "S" = ("S
1 " - "S2 ") - End play
"S" : Thickness of adjusting shim
"S
1" : Dimension from mainshaft standard face to
mainshaft rear bearing press-fit end face
"S
2" : Dimension from mainshaft standard face to
6th main gear end face
SCIA0995E