Owner's Manual

MT-12
[RS5F51A]
SIDE OIL SEAL
Revision: March 2005 2005 Altima
SIDE OIL SEAL PFP:32113
Removal and Installation ECS00944
REMOVAL
1. Remove the drive shaft from the transaxle case. Refer to FAX-11, "Removal and Installation" .
2. Remove the oil seal using suitable tool.
CAUTION:
Be careful not to damage the transaxle case surface when
removing the oil seal.
INSTALLATION
Installation is in the reverse order of removal.
● Using Tool, drive the oil seal straight in until it protrudes from the
transaxle case end equal to dimension “A” as shown.
CAUTION:
● Before installing oil seals, apply multi-purpose grease to
oil seal lips.
● Do not reuse oil seals.
● Check the transaxle oil level after installation. Refer to MT-11, "Checking" .
WCIA0023E
Dimension “A” : Within 0.5 mm (0.02 in) flush with
case.
Tool number : ST30720000 (J-25405)
SCIA1010E