Owner's Manual

MT-126
[RS6F51A]
FINAL DRIVE
Revision: March 2005 2005 Altima
6. Drive a new lock pin into the pinion mate shaft using a pin punch
as shown.
CAUTION:
Do not reuse the lock pin.
7. Install differential side bearing (transaxle case side) using Tool
as shown.
8. Align and install the speedometer drive gear onto the differential
case as shown.
9. Install differential side bearing (clutch housing side) using Tool
as shown.
10. Install the final gear into the differential case, and tighten the
final gear bolts to specification.
SCIA0908E
Tool number A: ST30720000 (J-25405)
B: KV38102510 (J-35870)
WCIA0304E
SMT842D
Tool number A: ST30720000 (J-25405)
B: KV38102510 (J-35870)
WCIA0305E
Final gear bolts : 122.5 - 137.5 N·m (13 - 14 kg-m,
91 - 101 ft-lb)
SCIA0912E