Owner's Manual
SHIFT CONTROL
MT-127
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
SHIFT CONTROL PFP:32982
Inspection ECS0095A
● Check the contact surfaces and sliding area for wear, damage,
or bending as shown. If necessary, replace the parts.
SHIFT FORK
● Check if the width of the shift fork hook (sliding area with cou-
pling sleeve) is within specification, as shown.
Shift Fork
SCIA0913E
SMT801D
Item One-side wear specification Sliding width of new part
1st & 2nd 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
3rd & 4th 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
5th & 6th 0.2 mm (0.008 in)
6.10 - 6.23 mm
(0.2402 - 0.2453 in)
Reverse 0.2 mm (0.008 in)
12.80 - 12.93 mm
(0.5039 - 0.5091 in)