Owner's Manual

TRANSAXLE ASSEMBLY

MT-25

[RS5F51A]

Revision: March 2005 2005 Altima

4. Remove check plugs (3 pieces), check springs (3 pieces), check

balls (3 pieces) and shift check sleeve (1 piece).

5. Remove transaxle case bolts.

6. Remove the bore plug.

CAUTION:

Be careful not to damage transaxle case.

7. While spreading the snap ring of mainshaft rear bearing located at bore plug hole, remove transaxle case.

8. Remove the oil gutter and baffle plate.

9. Remove snap ring, mainshaft rear bearing adjusting shim and input shaft rear bearing adjusting shim from

transaxle case.

10. Remove differential side bearing outer race (transaxle case

side) and then adjust shim.

11. Remove welch plug.

SCIA0396E

SCIA0983E

Tool number : KV381054S0 (J-34286)

WCIA0270E

SCIA0402E