Owner's Manual

MT-28
[RS5F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
32. Remove differential side bearing outer race (clutch housing
side).
33. Remove input shaft oil seal.
CAUTION:
Be careful not to damage clutch housing.
ASSEMBLY
1. Using a drift, install a new input shaft oil seal from the clutch
housing end of side to the depth of 1.8 - 2.8 mm (0.071 - 0.110
in).
CAUTION:
Oil seals are not reusable.
2. Using a drift, install a new differential oil seal.
CAUTION:
Oil seals are not reusable.
3. Install oil channel on mainshaft side as shown.
CAUTION:
Use the correct orientation for installation as shown.
Tool number : KV381054S0 (J-34286)
WCIA0272E
SCIA0398E
SCIA1022E
Tool number : ST30720000 (J-25405)
WCIA0273E
SCIA0986E