Owner's Manual

MT-32
[RS5F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
c. Apply Genuine Silicone RTV or equivalent to mating surfaces of
transaxle case and clutch housing. Refer to GI-45, "
RECOM-
MENDED CHEMICAL PRODUCTS AND SEALANTS" .
CAUTION:
Remove old sealant adhering to mounting surfaces. Also
remove any moisture, oil, or foreign material adhering to
application and mounting surfaces.
d. With snap ring of mainshaft rear bearing temporarily installed,
place transaxle case over clutch housing.
e. Through bore plug mounting hole, with snap ring stretched, lift
up mainshaft assembly from the control assembly mounting
hole.
f. Securely install snap ring onto mainshaft rear bearing.
SCIA0891E
SCIA0892E
SCIA0893E