Owner's Manual

TRANSAXLE ASSEMBLY
MT-33
[RS5F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
g. Tighten the bolts “A” and the new bolts “B”.
CAUTION:
Always replace bolts “B” because they are self-sealing
bolts.
h. Apply gear oil to the O-ring and install it to the control assembly. Then install control assembly to transaxle
case. Tighten bolts to the specified torque. Refer to MT-23, "
SHIFT CONTROL COMPONENTS" .
CAUTION:
Do not reuse O-ring.
i. Install shift check and a new stopper bolt.
CAUTION:
Shift check and stopper bolt are not reusable.
26. Using Tool, install a new bore plug as shown.
CAUTION:
Bore plugs are not reusable.
27. Using Tool, install a welch plug as shown.
28. Install 1 shift check sleeve, 3 check balls, 3 check springs, and 3
check ball plugs.
CAUTION:
Check ball plugs are not reusable. Never reuse them.
Bolt “A” : 50.0 - 53.9 N·m (5.1 - 5.4 kg-m, 37 - 39 ft-lb)
Bolt “B” : 63.0 - 66.9 N·m (6.5 - 6.8 kg-m, 47 - 49 ft-lb)
SCIA1064E
Tool number : ST33061000 (J-8107-2)
WCIA0276E
Tool number : ST33052000 ( — )
WCIA0277E
SCIA0396E