Owner's Manual

MT-38
[RS5F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
Adjusting Shim
CAUTION:
Only 1 adjusting shim can be selected.
1. Using depth micrometer and straight edge, measure dimension
“Q
1 ” between transaxle case end face and mounting face of
adjusting shim as shown.
2. Using depth micrometer and straight edge, measure dimension
“Q
2 ” between clutch housing case end face and end face of
reverse idler gear as shown.
3. Install selected reverse idler gear adjusting shim onto reverse idler gear.
Shim thickness mm (in) Part number Shim thickness mm (in) Part number
1.76 (0.0693)
1.80 (0.0709)
1.84 (0.0724)
1.88 (0.0740)
1.92 (0.0756)
1.96 (0.0772)
2.00 (0.0787)
2.04 (0.0803)
2.08 (0.0819)
2.12 (0.0835)
2.16 (0.0850)
2.20 (0.0866)
32237 8H800
32237 8H801
32237 8H802
32237 8H803
32237 8H804
32237 8H805
32237 8H806
32237 8H807
32237 8H808
32237 8H809
32237 8H810
32237 8H811
2.24 (0.0882)
2.28 (0.0898)
2.32 (0.0913)
2.36 (0.0929)
2.40 (0.0945)
2.44 (0.0961)
2.48 (0.0976)
2.52 (0.0992)
2.56 (0.1008)
2.60 (0.1024)
2.64 (0.1039)
32237 8H812
32237 8H813
32237 8H814
32237 8H815
32237 8H816
32237 8H817
32237 8H818
32237 8H819
32237 8H820
32237 8H821
32237 8H822
SCIA1003E
SCIA1005E