Owner's Manual
MT-42
[RS5F51A]
INPUT SHAFT AND GEARS
Revision: March 2005 2005 Altima
● Measure clearance “A” at two or more points diagonally opposite
using a dial indicator, and calculate average value.
● Measure clearance “B” at two or more points diagonally opposite
using a feeler gauge, and calculate average value.
Bearing
Check items below. If necessary, replace them with new ones.
● Damage and rough rotation of bearing
ASSEMBLY
1. Install 3rd needle bearing.
2. Install 3rd input gear and 3rd gear synchronizer assembly.
3. Install spread spring, shifting insert and 3rd-4th synchronizer hub onto 3rd-4th coupling sleeve.
CAUTION:
● Be careful with orientation of synchronizer hub.
● Do not reuse the 3rd-4th synchronizer hub.
Tool number A: ST30031000 (J-22912-01)
Clearance “A”
Standard value : 0.6 – 0.8 mm (0.024 – 0.031 in)
Limit value : 0.2 mm (0.008 in)
WCIA0283E
Clearance “B”
Standard value : 0.6 – 1.1 mm (0.024 – 0.043 in)
Limit value : 0.2 mm (0.008 in)
SCIA1084E
MTF0041D
SCIA0921E