Owner's Manual
MT-48
[RS5F51A]
MAINSHAFT AND GEARS
Revision: March 2005 2005 Altima
6. Remove 4th main gear and 5th main gear simultaneously.
7. Remove adjusting shim.
8. Remove 3rd-4th mainshaft spacer.
9. Remove 3rd main gear, 2nd main gear, 2nd needle bearing, 2nd
bushing, 1st-2nd synchronizer hub assembly, 1st main gear,
reverse main gear, 1st needle bearing, and 1st bushing simulta-
neously.
INSPECTION AFTER DISASSEMBLY
Mainshaft and Gears
Check items below. If necessary, replace them with new ones.
● Damage, peeling, dent, uneven wear, bending, and other non-
standard conditions of the shaft.
● Excessive wear, damage, peeling, and other non-standard con-
ditions of the gears.
Synchronizer
Check items below. If necessary, replace them with new ones.
● Damage and unusual wear on contact surfaces of coupling
sleeve, synchronizer hub, and shifting insert.
● Coupling sleeve and synchronizer hub must move smoothly.
Tool number A: ST33052000 ( — )
B: Commercial service tool
WCIA0292E
Tool number : KV40105020 ( — )
WCIA0293E
LCIA0307E
SMT387A