Owner's Manual

MT-52
[RS5F51A]
MAINSHAFT AND GEARS
Revision: March 2005 2005 Altima
CAUTION:
● Be careful with orientation of synchronizer hub.
● Be careful with orientation of coupling sleeve.
● Be sure not to hook ends of 2 spread springs (front and
back have two each) on same shifting insert.
5. Install 1st gear synchronizer assembly onto mainshaft, and syn-
chronizer hub assembly onto mainshaft.
CAUTION:
● Outer baulk ring, synchronizer cone, and inner baulk ring
on 2nd gear-side must have been removed.
● Be careful with orientation of coupling sleeve.
SCIA0921E
SCIA0989E
SCIA1083E
Tool number A: ST35321000 ( — )
B: KV38102510 ( — )
C: ST38220000 ( — )
WCIA0296E