Owner's Manual

MT-54
[RS5F51A]
MAINSHAFT AND GEARS
Revision: March 2005 2005 Altima
12. Install 4th main gear.
CAUTION:
Be careful with orientation of 4th main gear.
13. Install 5th main gear.
CAUTION:
Be careful with orientation of 5th main gear.
14. Install snap ring onto mainshaft, and check that end play of 5th
main gear satisfies standard value.
● If measurement is outside the standard range, reselect snap
ring.
Snap Rings
15. Install mainshaft rear bearing.
Tool number A: ST33200000 (J-26082)
B: ST30901000 (J-26010-01)
WCIA0299E
Tool number A: ST33200000 (J-26082)
B: ST30901000 (J-26010-01)
WCIA0300E
End play standard value : 0 - 0.1 mm (0 - 0.004 in)
SCIA0947E
Thickness Part number Thickness Part number
1.85 mm (0.0728 in)
1.90 mm (0.0748 in)
1.95 mm (0.0768 in)
2.00 mm (0.0787 in)
32204 8H500
32204 8H501
32204 8H502
32204 8H503
2.05 mm (0.0807 in)
2.10 mm (0.0827 in)
2.15 mm (0.0846 in)
2.20 mm (0.0866 in)
32204 8H504
32204 8H505
32204 8H506
32204 8H507
Tool number A: ST30720000 (J-25405)
B: ST30901000 (J-26010-01)
WCIA0301E