Owner's Manual

MT-62
[RS5F51A]
SHIFT CONTROL
Revision: March 2005 2005 Altima
SHIFT CONTROL PFP:32982
Inspection ECS0094I
● Check contact surfaces and sliding area for wear, damage,
bending, etc. If necessary, replace parts.
SHIFT FORK
● Check if the width of shift fork hook (sliding area with coupling
sleeve) is within allowable specification below.
SCIA0913E
Item One-side wear specification Sliding width of new part
1st & 2nd 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
3rd & 4th 0.2 mm (0.008 in)
7.80 - 7.93 mm
(0.3071 - 0.3122 in)
5th 0.2 mm (0.008 in)
6.10 - 6.23 mm
(0.2402 - 0.2453 in)
Reverse 0.2 mm (0.008 in)
12.80 - 12.93 mm
(0.5039 - 0.5091 in)
SMT801D