Owner's Manual

MT-64
[RS5F51A]
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: March 2005 2005 Altima
FINAL GEAR
Gear End Play ECS0094K
Unit: mm (in)
Baulk Ring Clearance ECS0094L
Unit: mm (in)
Engine QR25DE VQ35DE
Transaxle model RS5F51A
Model code number 9J506 9J504
Final gear ratio 4.133 3.812
Number of teeth
Final gear/Pinion 62/15 61/16
Side gear/Pinion mate gear 14/10 14/10
Triple cone synchronizer 2nd
Gear End play
1st main gear 0.20 - 0.30 (0.0079 - 0.0118)
2nd main gear 0.06 - 0.16 (0.0024 - 0.0063)
3rd input gear 0.18 - 0.31 (0.0071 - 0.0122)
4th input gear 0.20 - 0.30 (0.0079 - 0.0118)
5th input gear 0.06 - 0.16 (0.0024 - 0.0063)
Measurement point Standard Limit Value
1st and 3rd
(Double-cone synchronizer)
● Clearance between synchro-
nizer cone and inner baulk ring
end face “A”
● Clearance between outer baulk
ring paul and synchronizer cone
“B”
A: 0.6 - 0.8 (0.024 - 0.031)
B: 0.6 - 1.1 (0.024 - 0.043)
0.2 (0.008)
0.2 (0.008)
2nd
(Triple-cone synchronizer)
● Clearance between synchro-
nizer cone and clutch gear end
face “A”
● Clearance between outer baulk
ring paul and synchronizer cone
“B”
● Clearance between inner baulk
ring and clutch gear end face “C”
A: 0.6 - 1.2 (0.024 - 0.047)
B: 0.6 - 1.1 (0.024 - 0.043)
C: 0.7 - 1.1 (0.028 - 0.043)
0.3 (0.012)
0.2 (0.008)
0.3 (0.012)
4th 0.8 - 1.45 (0.035 - 0.057) 0.7 (0.028)
5th 0.95 - 1.4 (0.037 - 0.055) 0.7 (0.028)
Reverse 0.95 - 1.4 (0.037 - 0.055) 0.7 (0.028)
PCIB0249E
PCIB0772E