Owner's Manual

MT-82
[RS6F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
14. Lower vehicle, then install suitable engine slinger on the front of
the left bank cylinder head, and the rear of the right bank cylin-
der head as shown.
15. Support the engine using an engine support fixture or suitable
tool.
16. Remove the five upper bolts that mount the transaxle to the
engine using power tool.
17. Disconnect the LH transaxle mounting insulator using power
tool.
18. Raise vehicle, then remove front suspension member, LH
engine insulator, and LH engine mount bracket. Refer to EM-
220, "REMOVAL" .
19. Place a suitable jack support under the transaxle.
CAUTION:
When setting the jack, be careful not to bring it into contact with the switches.
20. Remove the five lower bolts that mount the transaxle to the engine using power tool.
21. Remove the transaxle from the vehicle.
SEM807G
SEM808G
MTD0062D