Owner's Manual

TRANSAXLE ASSEMBLY
MT-89
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
4. Remove the 2 check ball plugs, 2 check springs, 2 check balls
as shown. Discard the check ball plugs.
CAUTION:
Check ball plugs are not reusable.
5. Remove the transaxle case fixing bolts as shown.
6. Remove the bore plug.
CAUTION:
Be careful not to damage transaxle case.
7. While spreading the snap ring of the mainshaft rear bearing located at bore plug hole, remove the tran-
saxle case.
8. Remove the oil gutter and baffle plate.
9. Remove the snap ring, mainshaft rear bearing adjusting shim, and input shaft rear bearing adjusting shim
from the transaxle case.
10. Remove the differential side bearing outer race (transaxle case
side) using Tool as shown, and then remove the adjusting shim.
11. Remove the welch plug with a suitable punch and hammer as
shown.
LCIA0302E
SCIA0983E
Tool number : KV381054S0 (J-34286)
WCIA0270E
SCIA0402E