Owner's Manual

MT-90
[RS6F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
12. Remove the differential oil seal with a suitable tool as shown.
13. Remove the magnet from the clutch housing.
14. Remove the reverse check ball plug, reverse check spring, reverse shift check sleeve, and check ball.
Discard the check ball.
CAUTION:
● Do not reuse the check ball plug.
● Do not drop the check ball.
15. With the shift lever in 5th position, remove the bracket bolts from
the reverse lever assembly as shown. Lift the reverse lever
assembly to remove.
CAUTION:
Retain the shifter cap for installation.
16. Pull out the reverse fork rod then remove the reverse shift fork.
17. Remove the retaining pin of the reverse bracket.
18. Pull out the reverse lever and the reverse bracket fork rod.
19. Remove the check ball (2 pieces) and the interlock pin.
20. Shift the 3rd-4th fork rod to the 3rd position. Remove the retain-
ing pin of the 5th-6th shift fork using a pin punch.
SCIA0397E
SCIA0960E
SCIA0961E
SCIA0962E