Owner's Manual

TRANSAXLE ASSEMBLY
MT-91
[RS6F51A]
D
E
F
G
H
I
J
K
L
M
A
B
MT
Revision: March 2005 2005 Altima
21. Remove the stopper rings for the 5th-6th bracket.
22. Pull out the 5th-6th fork rod and remove the 5th-6th shift fork and the 5th-6th bracket.
23. Remove the check balls (2 pieces) and interlock pin.
24. Remove the retaining pin of 3rd-4th bracket using pin punch.
25. Remove the stopper rings for 3rd-4th shift fork.
26. Pull out the 3rd-4th fork rod and remove 3rd-4th shift fork and bracket.
27. Remove the shift check sleeve from the clutch housing.
28. Remove the retaining pin of 1st-2nd shift fork using a suitable
pin punch.
29. Pull out the 1st-2nd fork rod with bracket.
30. Remove the 1st-2nd shift fork.
31. Remove the retaining pin of 1st-2nd bracket using a suitable pin punch and separate the fork rod and
bracket.
32. Remove the gear components from the clutch housing.
a. While tapping the input shaft with a plastic hammer, remove the
input shaft assembly, mainshaft assembly, and reverse idler
gear assembly as a set.
CAUTION:
Always withdraw the mainshaft straight out. Failure to do
so can damage the resin oil channel on the clutch housing
side.
b. Remove the final drive assembly.
SCIA0963E
SCIA0393E
SCIA0394E
SCIA0964E