Owner's Manual

MT-92
[RS6F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
33. Remove the bearing retainer and then the mainshaft front bear-
ing as shown.
34. Remove the oil channel on the mainshaft side.
35. Remove the differential oil seal (clutch housing side).
36. Remove the differential side bearing outer race (clutch housing
side) using Tool as shown.
37. Remove the input shaft oil seal using a suitable tool as shown.
CAUTION:
Do not damage the clutch housing sealing surface.
ASSEMBLY
1. Install a new input shaft oil seal from the clutch housing end of
the side, to the depth of 1.8 - 2.8 mm (0.071 - 0.110 in) using
Tool as shown.
CAUTION:
Oil seals are not reusable.
SCIA0400E
Tool number : KV381054S0 (J-34286)
WCIA0272E
SCIA0398E
Tool number : ST35321000 ( — )
SCIA1022E