Owner's Manual

MT-94
[RS6F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
7. Install the final drive assembly into the clutch housing.
8. Install the input shaft assembly, mainshaft assembly, and
reverse idler gear assembly into the clutch housing.
CAUTION:
Do not damage the input shaft oil seal.
9. Install the 1st-2nd fork rod bracket onto the 1st-2nd fork rod, and
then install a new retaining pin as shown.
CAUTION:
Retaining pins are not reusable.
10. Install the 1st-2nd fork rod and the 1st-2nd shift fork, and then
install a new retaining pin.
CAUTION:
Retaining pins are not reusable.
11. Install the shift check sleeve.
12. Install the 3rd-4th bracket, 3rd-4th shift fork, and 3rd-4th fork rod with the interlock pin.
SCIA0888E
SCIA0964E
SCIA0889E
SCIA0394E