Owner's Manual

MT-98
[RS6F51A]
TRANSAXLE ASSEMBLY
Revision: March 2005 2005 Altima
31. Install a new bore plug using Tool as shown.
CAUTION:
Bore plugs are not reusable.
32. Install the new welch plug using Tool as shown.
CAUTION:
Do not reuse the welch plug.
33. Install the 2 check balls, 2 check springs, and the 2 new check
ball plugs.
CAUTION:
Check ball plugs are not reusable.
34. Apply sealant to the threads of the park/neutral position switch
and back-up lamp switch. Then install them into the transaxle
case. Refer to MT-84, "
CASE AND HOUSING COMPONENTS"
. Use Genuine Silicone RTV or equivalent. Refer to GI-45,
"RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS"
.
35. Install new gaskets onto the drain plug and filler plug, and then install them into the transaxle case.
CAUTION:
● Gaskets are not reusable.
● After oil is filled, tighten filler plug to specification. Refer to MT-84, "CASE AND HOUSING COM-
PONENTS" .
Tool number : ST33061000 (J-8107-2)
WCIA0276E
Tool number : ST33052000 ( — )
WCIA0277E
LCIA0302E
SCIA0895E