Owner's manual

Symptom/error message Solution

Displays “COMMAND NOT RECOG-

NIZED” or he system fails to interpret the

command correctly.

1. Ensure that the command format is valid, see Command list in this section.

2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level.

3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost on.

NOTE:

If it is too noisy to use the phone, it is likely that voice commands will not be recognized.

4. If optional words of the command have been omitted, then the command should be tried with these in place.

The system consistently selects the wrong

voicetag.

1. Ensure that the voicetag requested matches what was originally stored. This can be confirmed by giving the Address Book Directory

or Phone Directory command.

2. Replace one of the voicetags being confused with a different voicetag.

Monitor, climate, audio, phone and voice recognition systems 4-69

Z REVIEW COPY—

2007 Altima (alt)

Owners Manual—USA_English (nna)

10/27/06—debbie