Owner's manual

11. If the child restraint is installed in the front

passenger seat, push the ignition switch to

the ON position. The front passenger air bag

status light

should illuminate. If this

light is not illuminated see 9Front passenger

air bag and status light9 in this section.

Move the child restraint to another

seating position. Have the system

checked by a NISSAN dealer.

After the child restraint is removed and the seat

belt is fully retracted, the automatic locking mode

child restraint mode) is canceled.

Rear-facing

Follow these steps to install a rear-facing child

restraint using the vehicle seat belt in the rear

seats:

1. Child restraints for infants must be

used in the rear-facing direction and

therefore must not be used in the front

seat. Position the child restraint on the seat.

Always follow the restraint manufacturer’s

instructions.

2. Route the seat belt tongue through the child

restraint and insert it into the buckle until you

hear and feel the latch engage. Be sure to

follow the child restraint manufacturer’s in-

structions for belt routing.

Front facing – step 11

WRS0475

Rear-facing – step 1

WRS0256

Rear facing – step 2

WRS0761

1-28 Safety—Seats, seat belts and supplemental restraint system

Z REVIEW COPY—

2007 Altima (alt)

Owners Manual—USA_English (nna)

10/26/06—debbie