2008 Nissan Navigation System Owner's Manual (Click here to view this publication.) In addition to the Navigation System Owner's Manual, a Voice Recognition system supplement publication may pertain to your vehicle. Compare the VIN (vehicle identification number) information found on your vehicle's VIN plate to the VIN information below to determine applicability. The VIN plate is located on top of the instrument panel, on the driver's side of your vehicle.
Black plate (1,1) Table of Contents Introduction 1 Getting started 2 Map settings 3 Setting a destination 4 Route guidance 5 Storing a location/route 6 Viewing technical information 7 Other settings 8 Voice recognition 9 General system information 10 Troubleshooting guide 11 Index 12 Model "NAV2-N" Edited: 2007/ 2/ 5
Black plate (1,1) 1 Introduction How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 For safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Reference symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Laser product. . . . . . . . . . . .
Black plate (4,1) HOW TO USE THIS MANUAL This manual uses special words, symbols and icons, organized by function. Please refer to the following items and familiarize yourself with them. FOR SAFE OPERATION WARNING REFERENCE SYMBOLS INFO: This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely. This indicates information that is necessary for efficient use of your vehicle or accessories.
Black plate (5,1) SAFETY INFORMATION This system is primarily designed to help you reach your destination, and it also performs other functions as outlined in this manual. However, you, the driver, must use the system safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up-to-date. The system is not a substitute for safe, proper and legal driving. Before using the navigation system, please read the following safety information.
Black plate (6,1) LASER PRODUCT This navigation system is certified as a Class 1 laser product. The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J. WARNING . Do not disassemble or modify this system. There are no user serviceable parts in this navigation system. . If maintenance, adjustments and operations other than those specified in this manual are attempted, injury due to laser radiation and exposure could occur.
Black plate (4,1) 2 Getting started Control buttons and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Multi-function controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Steering switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Start-up screen . . . . . . . . . . . . . . . . . . .
Black plate (10,1) CONTROL BUTTONS AND FUNCTIONS the navigation information, such as GPS and version information, etc. 6 & : Push to switch between the day screen (bright) and the night screen (dark). Push and hold to turn off the display. Push again to turn on the display. 7 : & Push to access the system settings. 8 : & Push to repeat voice guidance for a guide point.
Black plate (11,1) 11 , : & Push to switch to the zoom mode to change the map scale. INFO: If needs to be pushed to apply the setting in a settings screen, this manual will explicitly include a step for this procedure. Otherwise, pushing returns you to the previous screen. MULTI-FUNCTION CONTROLLER displayed, the map menu screen is displayed.
Black plate (12,1) START-UP SCREEN 3 Tuning switch: & INFO: If you do not push for more than 30 seconds, the status screen will be displayed. Push ,
Black plate (13,1) NAVIGATION SYSTEM STATUS SCREEN By pushing while the current location map screen is displayed, you can display the current status of the navigation system. Each time is pushed, displayed information is switched in the order of audio, air conditioner, vehicle information and navigation route information.
Black plate (14,1) FUNCTIONS DISABLED WHILE DRIVING To ensure safe driving, some functions cannot be operated while driving. The on-screen functions that are not available while driving will be “grayed-out” or muted. In some cases, certain text will not be displayed on the screen. Park the vehicle in a safe location and then operate the navigation system.
Black plate (15,1) MENU SCREEN AND HOW TO OPERATE INFO: . . MENU SCREENS AND THEIR PURPOSES Push , , , or to display the corresponding menu screen. How to select a menu item Example: screen Some items in the menu contain further details, which are displayed on the right side of the screen when the menu item is highlighted. This allows you to preview details of the item. These details appear only on the menu screen displayed by pushing .
Black plate (16,1) INFO: This same adjustment can also be made by the touch panel operation. “Adjusting the volume and others” (page 2-10) USING CONTROLS TO ADJUST VALUES, LEVELS, ETC. There are four main methods you can use to control the navigation system: the center dial, the main directional buttons and the touch panel. Use these controls to adjust the volume of phone and voice guidance, the display brightness, etc. 2-8 How to adjust 1. Highlight the preferred setting item and push .
Black plate (17,1) the selected item. Turn the center dial or push the up or down buttons of the main directional buttons to scroll the list. 5 Highlight & and push to sort the list by shortest distance. 6 Highlight & and push to sort the list in the original order. 7 When & the list is sorted by the shortest distance, you can confirm the selected location in the preview on the right side of the screen. LIST SCREEN After searching for a point of interest, a list screen is displayed.
Black plate (18,1) TOUCH PANEL OPERATION With this system, the same operations as those for the multi-function controller are possible using the touch panel operation. This manual describes the operations using the multi-function controller. For the operations that differ from those of the multi-function controller and for useful methods for using the touch panel operation, refer to each section.
Black plate (19,1) MAP MENU SCREEN Push while the current location map screen or a scrolled map screen is displayed to display the menu corresponding to that screen. This menu allows you to quickly use helpful functions, such as setting a destination easily and searching for Points of Interest nearby. To select a menu item, use the method described in “Menu screen types and how to operate”.
Black plate (20,1) STORING YOUR HOME LOCATION/ ADDRESS SCROLLED LOCATION MAP SCREEN If is pushed while a scrolled map screen is displayed, the following options are available. . New Dest.: Allows you to set the destination to the location where you pushed . If a destination is already set, the location will be set as the new destination. “SETTING FROM MAP” (page 4-23) . Add to Route: Allows you to set the location where you pushed as the destination or a waypoint.
Black plate (21,1) 2. Highlight [Home Location (Add New)] and push . 3. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . 4. Highlight [Street Address] and push . A character input screen is displayed. 5. Enter the address of your home, highlight [OK] and push . The map screen is displayed. “SETTING A STREET ADDRESS” (page 4-4) 6. Pushing the directional buttons, adjust your home location if necessary. 7.
Black plate (22,1) SETTING A DESTINATION INFO: You can also perform the same setting by pushing and selecting [Navigation]. “STORING A LOCATION BY SEARCHING” (page 6-2) SEARCHING FOR A DESTINATION As an example, the method for setting an airport as the destination using [Points of Interest] is described here. 3. Highlight [Travel] and push . 1. Push . 4. From the category list, highlight [AIRPORT] and push . 2. Highlight [Points of Interest] and push .
Black plate (23,1) INFO: You can enter the city name and facility name to narrow down your search. The number of narrowed down points are displayed in the “Matches” column. 5. Highlight [By Name] and push . A character input screen is displayed. 8. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push . INFO: 7. Highlight the preferred airport from the list and push . INFO: . 6.
Black plate (24,1) STARTING ROUTE GUIDANCE DELETING A ROUTE After setting the destination and performing route calculation, the suggested route is displayed. To delete a route already set, use the following procedure. If you delete a route, the destination is also deleted. 1. Highlight [Start] and push . 3. When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen.
Black plate (25,1) OPERATING MAPS 3. A confirmation message is displayed. Highlight [Yes] and push . INFO: If a route is cancelled, [Cancel Route] changes to [Resume Route]. Highlight [Resume Route] and push to reactivate the cancelled route. This is available only until a new route is set. HOW TO VIEW MAP SCREEN 2 & Displays the vehicle location, with which the route is set, as the starting point. The navigation system displays various information on the map screen.
Black plate (26,1) SETTING THE VOICE GUIDANCE 4 & Waypoint: Displays the locations that you travel past when going to the destination. A maximum of 5 waypoints can be set. 5 & Destination: Indicates the destination location of the route guidance. When the map scale is 300 ft or less in Plan View, or 1/4 mile or less in Birdview: The name is displayed on the map screen. 9 & Scale indicator: Indicates the scale of the map. Touch the icon to display the scale bar.
Black plate (27,1) . ADJUSTING VOICE GUIDANCE VOLUME You can adjust the volume of voice guidance. 3. Highlight [Guidance Voice] and push . The indicator illuminates if voice guidance is activated. 3. Highlight [Guidance Vol.] and push . Other settings You can also activate or deactivate voice guidance using the following procedure. 1. Push . 4. Adjust the voice guidance volume by using the center dial or main directional buttons. 1) Push .
Black plate (28,1) HOW TO INPUT LETTERS AND NUMBERS CHARACTER (letter and number) INPUT SCREEN You will have to enter alphanumeric characters when setting a destination, searching for a facility or editing the stored locations, etc. INFO: You can also adjust the volume by turning the audio system volume knob or tilting on the steering switch while voice guidance is being announced. 1.
Black plate (29,1) INFO: . . . . You can push on the control panel to return to the previous screen, but only after deleting all the characters entered. When you touch [BACK] on the screen, the screen returns to the previous screen even when characters have been entered. When the character that you have entered can only be followed by one other character, that character is entered automatically.
Black plate (30,1) NISSAN VOICE RECOGNITION INFO: . You can push on the control panel to return to the previous screen, but only after deleting all the numbers entered. . When you touch [BACK] on the screen, the screen returns to the previous screen even when numbers have been entered. 3. Push , or highlight [Delete] and push to delete the last number entered. Push and hold to delete all the numbers entered.
Black plate (31,1) Example: Displaying the navigation command list 1. Push . 2. Highlight [Others] and push . 3. Highlight [Voice Recognition] and push . 4. Highlight [Command List] and push . 5. Highlight [Navigation] and push . 6. Highlight the preferred item and push . Available items: . Destination: Allows you to set a destination. . Search: Allows you to search for a location. . Map: Allows you to change the map settings. .
Black plate (32,1) . Wait until the tone sounds before speaking a command. Otherwise, the command will not be recognized properly. . Speak in a natural conversational voice without pausing between words. . If the air conditioner is set to “Auto”, the fan speed is automatically lowered so that your commands can be recognized more easily. Example 1: Switching the map to the Plan View mode “Plan View Map”.
Black plate (33,1) 2. The system announces, “Please say a command”. 6. If a route is already set, choose “Along Route” or “Nearby”. 3. After the tone sounds and the icon on the ] to [ ], speak screen changes from [ “Destination nearby places”. 7. After the tone sounds and the icon on the screen changes again, speak “Along Route”. 10. Voice feedback will be provided when the command is accepted, and the system starts calculating a route to the selected facility.
Black plate (34,1) INFO: . . 2. The system announces, “Please say a command”. Only the official street names stored in the map data can be recognized by the system. You need to speak the street name precisely including boulevard, way, north, south, etc. In this case, you cannot speak “Figueroa street” or “Figueroa”. 5. Speak the name of the city, “Gardena”. 3. Speak “Destination street address”. 6. Speak the name of the street, “South figueroa street”. 4. Speak the name of the state, “California”.
Black plate (35,1) 9. Speak the house number. “How to speak numbers” (page 9-10) INFO: If you do not know the house number, speak “No house number”. 10. To confirm the destination location on the map, speak “Show map”. To calculate a route, speak “Calculate route”.
Black plate (36,1) MEMO 2-28 Getting started Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (7,1) 3 Map settings Map types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Plan view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 BirdviewTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Building graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (38,1) MAP TYPES Two types of map views are available: Plan View and BirdviewTM. PLAN VIEW Plan View displays the map in a 2-dimensional environment similar to a road map. Screen information 1 & Vehicle icon: Indicates the current vehicle location and the direction that you are traveling. 2 & Guide point: Indicates a guide point on the route. 3 & 3-2 Remaining time and distance to the destination: Indicates the approximate remaining time and distance to the destination or waypoint.
Black plate (39,1) 5 & / Direction indicator: Indicates the direction of the map. Touch the icon to switch the direction of the map. 6 & Scale indicator: Indicates the scale of the map. Touch the icon to display the scale bar. This allows the map scale to be adjusted. 7 & Arrow: Indicates the distance to the next guide point and the turning direction at that guide point. 8 & Stored location: Displays the locations that are stored in the Address Book.
Black plate (40,1) RETURNING TO THE CURRENT VEHICLE LOCATION 3D building graphics (BirdviewTM) INFO: In the area where the building graphics are not stored in the map data, the normal map is displayed even when the map is zoomed in. The basic map screen displays the current location (the position where the vehicle mark is located). The current location can be displayed again even after the map is moved, or after the menu screen or the guide screen is displayed. Push
Black plate (41,1) MOVING A MAP OPERATING WITH THE TOUCH OPERATION Touch [BACK] on the map screen to display the current location map screen. The operations for moving across the map are different between Plan View and BirdviewTM. PLAN VIEW Operating with the multi-function controller Push one of the main directional buttons or additional directional buttons corresponding to the direction that you want to move across the map. Hold down the button to continuously move across the map in that direction.
Black plate (42,1) 3 Street name & Operating with the touch operation INFO: When the operation is performed during driving, the scrolling is stopped after the screen scrolls to the touched direction for a specified amount. If the map screen is set to the building footprint graphics, the map cannot be scrolled while driving. Fine-adjusting the cursor position: 2. Touch the 8-directional key to adjust the cross pointer position. Touch [BACK] to end the adjustment. 1. Touch the screen.
Black plate (43,1) Screen information: 1 Cross pointer & 2 Distance & from the vehicle position to the cross pointer 3 Street name & Operating with the touch operation BirdviewTM Rotates the map clockwise. Operating with the multi-function controller Rotates the map counterclockwise. The main directional buttons and additional directional buttons allow movement in the following ways.
Black plate (44,1) INFO: When the operation is performed during driving, the scrolling is stopped after the screen scrolls to the touched direction for a specified amount. If the map scale is set to 180 ft (60 m) or less, the map cannot be scrolled while driving. 2. Touch the direction you desire to scroll to. The map continues to scroll while the screen is touched. 3. Touch [ ] or [ direction of the map. ] to change the :Rotates the map clockwise. :Rotates the map counterclockwise.
Black plate (45,1) CHANGING THE SCALE OF A MAP OPERATING WITH THE BUTTONS ON THE CONTROL PANEL Push or . A scale appears on the left side of the screen. To view the map in detail, push . To view a wider area, push . The scale will automatically disappear when neither nor has been pushed for several seconds. If the scaling operation is not performed for a specified period of time, the scale display disappears.
Black plate (46,1) OPERATING WITH THE CENTER DIAL OPERATING WITH THE TOUCH OPERATION 1. Touch . Displays the scale. 1. Turn the center dial on the map screen. The map scale is displayed. 2. Use the center dial to adjust the map scale. 1 Clockwise: Zoom in & 2 Counterclockwise: Zoom out & INFO: Free zoom: Depending on the setting, using the center dial to change the map scale may adjust the scale normally, or it may engage the free zoom (finer scale adjustment in smaller steps).
Black plate (47,1) INFO: Free zoom: Once the Free Zoom is set in the setting screen, the scale can be changed in smaller steps when you push and hold [ZOOM IN] or [ZOOM OUT] than when you briefly push the button. If you briefly push the button, the operation returns to normal. Setting by voice command 1. Push located on the steering switch. 2. After the tone sounds, speak a command.
Black plate (48,1) OTHER SETTINGS FOR THE MAP SCREEN Scale level of the BirdviewTM display Other settings are also available for the map screen, such as switching the map view, changing the map direction, splitting the screen, etc. Distance between grids Map scale 1:20.48 million SWITCHING THE MAP VIEW 160 miles (256 km) The map view can be changed between Plan View and BirdviewTM. The map can also be displayed in the split screen mode. 1:5.12 million 32 miles (64 km) 1:2.
Black plate (49,1) Available views 2. Highlight [Map Settings] and push . . Plan View: Switches to Plan View. . BirdviewTM: Switches to BirdviewTM. . Split (Plan View): Changes to the split screen mode and both halves display maps in Plan View. . Split (BirdviewTM): Changes to the split screen mode and the left half displays the map in Plan View and the right half displays the map in BirdviewTM. Split (Plan View) INFO: 3.
Black plate (50,1) Other settings You can also set the map view using the following procedure. . To display a map in BirdviewTM: “Birdview map” . To display a split map in Plan View: “Planview Split Map” . To display a split map in BirdviewTM: “Birdview Split Map” SETTINGS OF HEADING/LONG RANGE MAP VIEW 1) Push . 2) Highlight [Navigation] and push . 3) Highlight [Map Settings] and push .
Black plate (51,1) . BirdviewTM Angle: This changes the BirdviewTM angle. INFO: 4. Highlight the preferred map orientation and push . The indicator of the selected map orientation illuminates. . [Long Range] is displayed only when you select [Heading Up]. . [Birdview Angle] is displayed only when the map view is set to the Birdview or Split (Birdview) mode. INFO: If the map orientation is switched, the icon displayed in the lower left corner is also switched. 5.
Black plate (52,1) Other settings CHANGING THE BirdviewTM ANGLE You can also set the orientation of the map using the following procedure. This changes the BirdviewTM angle. This setting is available only in the BirdviewTM or Split (BirdviewTM) mode. INFO: 1) Push . 2) Highlight [Navigation] and push . 3) Highlight [Map Settings] and push . 4) Highlight [Settings] and push . Touching the icon on the map can also change the direction of the map.
Black plate (53,1) 6. Push
Black plate (54,1) OPERATION WITH SPLIT SCREEN DISPLAY Available map orientations When the split screen is displayed, you can operate the left/right screen. 3. Highlight [Left Settings] or [Right Settings] and push . 1. Push while the current location map screen is displayed. . North Up: North is set at the top of the map. . Heading Up: The traveling direction is set at the top of the map. . Long Range: The vehicle icon is located slightly lower than the center of the screen.
Black plate (55,1) LOOKING AT INFORMATION ON THE MAP Other settings You can display icons on the map and view information about destinations or landmarks. You can also change the scale of the left screen using the following procedure. DISPLAYING LANDMARK ICONS This allows you to display or hide the landmark icons by type. Landmark icons that can be displayed 1) Push . 2) Highlight [Navigation] and push . 3) Highlight [Map Settings] and push .
Black plate (56,1) Other settings You can also set the landmark icons using the following procedure. 2. After the tone sounds, speak a command. . To display all of the landmark icons: “Landmark Icons” . To display the landmark icons of the specified POIs: Landmark Icons ” MAP SCROLLING INFORMATION 3. Highlight the preferred icon and push . The icon display setting toggles on and off each time you push . The indicator of the selected icon illuminates.
Black plate (57,1) 3. Highlight [Map Scrolling Information] and push . 5. Push
Black plate (58,1) MAP SYMBOLS This navigation system uses symbols to display facilities.
Black plate (59,1) Map settings 3-23 Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (60,1) Road color Traffic information on map The road types are differentiated by colors. Freeway: Pink with red border Main road: Amber Narrow street: Gray Road with incomplete map data: Dark green With a subscription to XM® NavTrafficTM service, traffic information is displayed.
Black plate (10,1) 4 Setting a destination Destination screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Changing the region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Setting a Street Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Setting a point of interest. . . . . . . . . .
Black plate (62,1) DESTINATION SCREEN There are several methods you can use to set your destination. Understand the advantages of each method and select the best method for finding and setting your destination. BASIC OPERATION 1. Push . 2. Highlight the preferred destination setting method and push . . Home: Searches for a route from the current location to the previously stored home destination. . Address Book: Searches for a destination from the list of the stored locations. .
Black plate (63,1) CHANGING THE REGION When setting a destination, you can narrow down the place by specifying the region or city. Specifying the region 1. Push . 2. Highlight [Change Region] and push . Available setting items . . . . . . . . . . .
Black plate (64,1) 3. Highlight the city of the destination from the list and push . INFO: 1. Push . 2. Highlight [Street Address] and push . A character input screen is displayed. 4. Enter the name of the street. After finishing the entry, highlight [List] and push . A list of cities is displayed. In some cases, when a city name has been entered, the number of matching destinations in the “Matches” column may be different from the number displayed on the list screen.
Black plate (65,1) the list screen. If this occurs, enter more characters to further reduce the number of matches. 6. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route. INFO: Even after setting a destination, you can adjust the location of the destination, store the route, etc.
Black plate (66,1) 2. Highlight [Points of Interest] and push . 2. Enter the name of the destination facility. 3. Select whether to search by directly inputting the facility name, or by selecting from the landmark category. 3. After finishing the entry, highlight [List] and push . A list screen is displayed. INFO: . Search by inputting a landmark name . 4. Highlight the preferred destination facility from the list and push . By selecting [By Dist.
Black plate (67,1) selected location and starts calculating a route. INFO: Even after setting a destination, you can adjust the location of the destination, store the location, etc. “OPERATIONS AFTER SETTING A DESTINATION” (page 4-24) INFO: By selecting [By Cat.], you can display the list that summarizes the entered names into categories. Select the category to narrow down the search. Search by selecting from the landmark category 1. Highlight the main category and push . 5.
Black plate (68,1) . By city “Specifying the city” (page 4-3) INFO: By selecting [Sort], you can sort the list in the original order. Narrowing down with By Name: 1. Highlight [By Name] and push . A character input screen is displayed. Narrowing down with Nearby POI: 1. H i g h l i g h t [ N e a r b y P O I ] a n d p u s h . A list screen is displayed. 3. The selected destination is displayed at the center of the map.
Black plate (69,1) destinations in the “Matches” column may be different from the number displayed on the list screen. If this occurs, enter more characters to further reduce the number of matches. confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route. INFO: Even after setting a destination, you can adjust the location of the destination, store the location, etc.
Black plate (70,1) Category list: Restaurant Restaurant all African, American, Austrian, Balkan, Barbecue/Southern, Belgian, Bistro, Bohemian, Brewpub, British isles, Cajun/Caribbean, Californian, Canadian, Chinese, Continental, Dutch, East European, Fast food, Filipino, French, German, Greek, Grill, Hawaiian/Polynesian, Hungarian, Indian, Indonesian/ Malaysian, International, Italian, Japanese, Jewish/Kosher, Korean, Latin American, Maltese, Mexican, Middle Eastern, Oriental, Other, Pizza, Polish, Portu
Black plate (71,1) Airport Border crossing Bus station Commuter rail station Ferry terminal Hotel Travel Hotel all America Inn & Suites, Amerihost (Cendant), Amerisuites, Baymont Inn & Suites, Best Western, Candlewood Suites, Clarion, Country Hearth Inn, Country Inn Suites (Carlson Group), Courtyard by Marriott, Crossland Motel, Crowne Plaza, Days Inn, Double Tree (Hilton Group), Drury Inn/Pear Tree by Drury, Econo Lodge, Embassy Suites, Extended Stay, Fairfield Inn, Four Seasons, Hampton Inn, Hawthorn
Black plate (72,1) Banking ATM Bank Hospital Community City hall, Community center, Convention/Exhibition center, Court house, Historical monument, Hospital, Library, Marina, Museum, Police station, Park/Recreation area, School, Sports center, Sports complex, Performing arts, Higher education Leisure Amusement park, Bowling center, Casino, Movie theater, Convention/Exhibition center, Golf course, Historical monument, Ice skating rink, Marina, Museum, Nightlife, Park/Recreation area, Ski resort, Sports
Black plate (73,1) SETTING YOUR HOME This allows you to set your home as the destination and have the system calculate a route. It is useful especially when you are searching for a route to return to your home. 1. Push . 2. Highlight [Home] and push . INFO: If you have not stored your home yet, the system will automatically display a screen for storing it. “STORING A LOCATION” (page 6-2) 4. Your home is displayed at the center of the map.
Black plate (74,1) and push . INFO: . . Selecting [Sort List] displays a list of various sort functions. To use the sort functions, stored locations must be set in advance. “EDITING THE STORED HOME AND LOCATION” (page 6-9) Select [Play All] to play back the stored voicetag. 2 Sort by name: & The Address Book entries are displayed in alphabetic order. 3 Sort by icon: & By selecting a particular icon, a list that contains only the Address Book entries associated with that icon is displayed.
Black plate (75,1) 1. Push . 2. Highlight [Nearby Places] and push . 4. Highlight the preferred destination from the list, and push . The position of the selected location is displayed in the preview on the right side of the screen. 5. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location and push . The system sets the destination to the selected location and starts calculating a route. INFO: . 3.
Black plate (76,1) You can also set the destination by pushing in the current location map screen and selecting [Nearby]. Setting by voice command 1. Push located on the steering switch. 2. After the tone sounds, speak a command. . To display the 5 nearest Points of Interest and select the destination from them: “Show nearby ” . To display the nearby category list and select the destination from it: “Destination Nearby Places” “Destination Nearby ” 1.
Black plate (77,1) SETTING THE PREVIOUS STARTING POINT To set the previous start point as the destination: “Destination Previous Start Point” This allows you to set the destination to the starting point of the previous route guidance and have the system calculate a route. SETTING FROM STORED ROUTES 1. Push . 2. Highlight [Next Page] and push . You can select a preferred route from the stored routes. 4.
Black plate (78,1) INFO: 4. Highlight the preferred route from the list and push . The route to the destination is set. . Even after setting a destination, you can adjust the location of the destination, store the location, etc. “OPERATIONS AFTER SETTING A DESTINATION” (page 4-24) . The stored route includes only locations (destination and waypoints) and route calculation conditions, not the route itself.
Black plate (79,1) SETTING A FREEWAY ENTRANCE/ EXIT This allows you to set the destination to an entrance or exit of a freeway, and then have the system calculate a route. 4. Enter the telephone number including the area code. 5. After finishing the entry, highlight [Map] and push . “PHONE NUMBER INPUT SCREEN” (page 2-21) 7. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push .
Black plate (80,1) 4. Select a region and enter the name of the freeway. 7. Highlight [Entrance] or [Exit] and push . A list screen is displayed. 5. After finishing the entry, highlight [List] and push . 6. Highlight the freeway of the destination from the list, and push . INFO: By selecting [By Distance], you can sort the list by the nearest distance. 8. Select the preferred destination from the list.
Black plate (81,1) INFO: Even after setting a destination, you can adjust the location of the destination, store the route, etc. “OPERATIONS AFTER SETTING A DESTINATION” (page 4-24) SETTING AN INTERSECTION This allows you to set the destination to an intersection of any two streets, and then have the system calculate a route. 1. Push . 2. Highlight [Next Page] and push . 3. H i g h l i g h t [ I n t e r s e c t i o n ] a n d p u s h . A character input screen is displayed. 5.
Black plate (82,1) INFO: Even after setting a destination, you can adjust the location of the destination, store the route, etc. “OPERATIONS AFTER SETTING A DESTINATION” (page 4-24) SETTING A CITY CENTER 7. Highlight a street as the 2nd street from the list and push . 8. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push .
Black plate (83,1) SETTING FROM MAP This allows you to search for a destination by scrolling the map, and then have the system calculate a route to the destination. 5. Highlight the preferred destination from the list and push . The position of the selected location is displayed in the preview on the right side of the screen. 6. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push .
Black plate (84,1) OPERATIONS AFTER SETTING A DESTINATION The following operations are available after you set a destination. 2. Highlight [New Dest.] and push . INFO: For the items except for [New Dest.], refer to “Map menu screen”. “SCROLLED LOCATION MAP SCREEN” (page 2-12) INFO: If you set the destination on a freeway, a confirmation message is displayed. INFO: The menu will not be displayed if you select, [Stored Route] or [Nearby Places] from the Destination menu. 3.
Black plate (85,1) AVAILABLE SETTING ITEMS . Start: Sets the destination. If the route is already set, the location becomes the new destination, and the route is recalculated. . Route Details: Allows you to change the route search conditions or to check the route information. “PROCEDURES AFTER SETTING A DESTINATION” (page 5-2) . Move Dest.: Displays a map screen where you can adjust the location of the destination. . Add to Route: Allows you to add a waypoint to the route already set. . Store Dest.
Black plate (86,1) ADDING ADDITIONAL DESTINATIONS TO A ROUTE Even after the route is already set, you can add a searched location as a new destination or waypoint to that route. If the route has not been set, [Add to Route] cannot be selected. 3. Highlight [Destination] or [Waypoint] and push . STORING A LOCATION A searched location can be stored in the Address Book. Then it can be easily retrieved and set as a destination (or waypoint). 1. Set the destination using an appropriate method. 3.
Black plate (87,1) 2. Highlight [POI Info.] and push . 3. Information about the location is displayed. 4. Push , or highlight [OK] and push to return to the previous screen. INFO: . If [call] is displayed on the right side of the screen, it is possible to call the location indicated. . The Bluetooth system is required to be active and paired to the call location indicated. . Information about locations is not displayed while driving.
Black plate (88,1) MEMO 4-28 Setting a destination Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (13,1) 5 Route guidance Procedures after setting a destination . . . . . . . . . . . . . . . . . . . . . 5-2 Available items after setting a destination . . . . . . . . . . . . . 5-2 Starting route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Selecting a route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Confirming a route. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (90,1) PROCEDURES AFTER SETTING A DESTINATION After performing the route search, you can immediately start the route guidance. Also, it is possible to confirm or change the route. AVAILABLE ITEMS AFTER SETTING A DESTINATION . Start: Starts route guidance to the selected destination. “STARTING ROUTE GUIDANCE” (page 5-2) . More Routes: Displays 3 alternative routes. “SELECTING A ROUTE” (page 5-2) . Route Info: Displays the route information. “CONFIRMING A ROUTE” (page 5-3) . Add Way Pt.
Black plate (91,1) 3. Push to return to the previous screen. INFO: . After you select a route, a preview is displayed on the right side of the screen. . The 3 routes may not always be different. CONFIRMING A ROUTE Available information Available route conditions 1 Short. Time (Blue): & Prioritizes by the shortest time. 2 Min. FWY (Red): & Minimizes the use of freeways. 3 Short. Dist. (Green): & Prioritizes by the shortest distance.
Black plate (92,1) . Map Scroll: Displays a map screen where you can confirm the location of the destination. Even if you touch the map screen or operate the directional buttons other than the up or down button, the same map screen as when [Map Scroll] is selected is displayed. ADDING A DESTINATION OR WAYPOINT Before starting route guidance, you can add destinations and/or waypoints. A total of 6 destinations or waypoints can be set. INFO: You can modify the location by selecting [Alter Location].
Black plate (93,1) ROUTE SCREEN INFO: . . If a waypoint was added, [More Routes] cannot be selected. If a destination was added, the prior destination becomes a waypoint. During route guidance, you can modify the route conditions or confirm the route information. Set the appropriate route condition according to your purpose. BASIC OPERATION 1. Push . 2. Highlight the preferred setting item and push . 3. Push
Black plate (94,1) . Route Settings: Allows you to change the route calculation conditions anywhere along the route. “SETTING CONDITIONS FOR THE ROUTE CALCULATION” (page 5-14) . Recalculate: You can manually search for the route again after changing the search condition. “RECALCULATE ROUTE” (page 5-16) . Detour: If you want to detour from the suggested route, you can calculate a route detouring for a specified distance. “SETTING A DETOUR ROUTE” (page 5-17) .
Black plate (95,1) 3. Highlight the preferred condition and push . 4. Push to return to the previous screen. Push
Black plate (96,1) INFO: Setting a destination or waypoint Even after setting a destination/waypoint, you can adjust the destination/waypoint location, store the route, etc. “OPERATIONS AFTER SETTING A DESTINATION” (page 4-24) You can add a destination or waypoint to the route already set. A total of 6 destinations or waypoints can be set. 4. Set a destination or waypoint. The method of searching for a destination or waypoint is the same as the one for a destination. “4. Setting a destination” 1.
Black plate (97,1) Editing/deleting a destination or waypoint You can modify or delete the destination or waypoint already set. INFO: If you modify or delete a location when a suggested route is already set, the prior suggested route will be recalculated accordingly. 4. Highlight [Move Dest.] to modify the location and push . “ADJUSTING THE LOCATION OF THE DESTINATION” (page 4-25) 6. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push .
Black plate (98,1) The screen will automatically return to the [Edit] screen after route calculation. Changing route calculation conditions Each section of the route between waypoints can have different route calculation conditions. After setting these conditions, you can recalculate the entire route. 4. Highlight the preferred condition and push . Available conditions: : Fastest Route 1. Push . 2. Highlight [Edit] and push . : Minimize Freeway : Shortest Route 3.
Black plate (99,1) CONFIRMING A ROUTE When the suggested route is displayed after calculation, you can confirm the route information or simulate the suggested route. Basic operation 1. Push . 2. Highlight [Route Information] and push . Available items: . Turn List: Displays the details of the suggested route. “Using turn list” (page 5-11) . Preview: Allows you to confirm the suggested route by scrolling the map. “Using route preview” (page 5-12) .
Black plate (100,1) Using route preview While the map scale is being changed, the route preview is temporarily stopped. While the map scale is being changed, the simulation is temporarily stopped. Confirming by simulation SEARCHING FOR A DETOUR ROUTE TAKING TRAFFIC INFORMATION INTO CONSIDERATION When a serious traffic event occurs on the route, or if the system finds a faster route, a detour alert will pop up automatically. If you miss the automatic alert, you can also manually search for a detour. 1.
Black plate (101,1) 3. When the detour search is successful, detailed information about the detour route (left screen) and the comparison screen of the two routes (right screen) are displayed. 1 Yellow: Original route & 2 Pink: Detour route & 3 The change of distance and estimated & travel time to destination when the detour route is taken. 4. If you want to accept the suggested detour route, select [Yes], and then push . INFO: .
Black plate (102,1) INFO: . If no operation is performed for one minute after the message is displayed, the message disappears. The detour will not be accepted, and the current suggested route will remain unchanged. . When the “Traffic Announcement” function is turned on, you will hear the voice guidance at the same time that the message appears on the screen.
Black plate (103,1) Available setting items: . Minimize Toll Roads: Minimizes the use of toll roads. . Traffic Info. Settings: A link to traffic information setting menu, where you can confirm or change whether to consider traffic information when searching for a route. . Use Time Restricted Roads: Uses any roads subject to time restrictions. . Use Avoid Area Settings: Enables the avoid area setting. . Use Ferries: Includes the use of ferries. .
Black plate (104,1) congestions. . Use Traffic for Travel Time: Calculates the estimated travel time to destination taking traffic flow into consideration. . Use Traffic for Route Calculation: Allows you to perform the route search with the traffic information taken into consideration. When “Auto Reroute” is set, the detour route search can be performed automatically. . Traffic Announcements: This can provide you with the announcement of the traffic information event on the route.
Black plate (105,1) To recalculate a route: “Recalculate” Setting the Auto Reroute 1. Push . 2. Highlight [Route Settings] and push . 4. Highlight [Auto Reroute] and push . The indicator for the selected condition illuminates. When the current location map screen or route setting screen is displayed, the system recalculates a route with the set conditions. “Detailed route settings” (page 5-14) 1. Push . 2. Highlight [Detour] and push .
Black plate (106,1) lected. . If the system cannot calculate a detour with the specified conditions, it displays the previous suggested route. . If the vehicle is traveling very fast, the detour route may start from a location that the vehicle has already passed. Setting by voice command 1. Push located on the steering switch. 2. After the tone sounds, speak a command.
Black plate (107,1) Visual guidance settings Intersection Map: The guidance screen can be displayed at all times even when the vehicle is located away from the guide point. You can choose which screen is to be displayed. intersection view is automatically displayed when the vehicle approaches the guide point. INFO: The map screen and the enlarged intersection view can be displayed at the same time. INFO: 1. Push . Push
Black plate (108,1) INFO: : Display of the travel time to the waypoint When an enlarged intersection view is displayed, you can return to the map screen by pushing
Black plate (109,1) 5. The information icon display in the turn list is now deactivated. Selecting a waypoint from the turn list: 2. Highlight the landmark category and push . The list screen for showing facilities located near the freeway exit is displayed. When [Exit info. on Turn List] is set to on, you can set a waypoint to a facility located near the freeway exit. 4. The waypoint is set, and the route search is performed.
Black plate (110,1) 3. Highlight [Voice Announcements] and push . Available setting items: Basic operation: 4. Highlight [Twice] or [Three Times] and push . The indicator for the selected number of repetitions illuminates. 1. Push . 5. Push
Black plate (111,1) ABOUT ROUTE GUIDANCE After setting the route, select [Start] to begin route guidance. Throughout route guidance, the system navigates you through the guide points using visual and voice guidance. CAUTION . The navigation system’s visual and voice guidance is for reference purposes only. The contents of the guidance may be inappropriate depending on the situation. . When driving along the suggested route, follow all traffic regulations (e.g., one-way traffic).
Black plate (112,1) GUIDANCE SCREENS AND PREVIEW MODE Enlarged intersection view Junction guidance When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen. After passing through the intersection, the system automatically returns to the full screen mode. To switch to the full screen mode while the enlarged intersection view is displayed, push
Black plate (113,1) Turn list Depending on the setting, the system can constantly display the split screen and show the turn list in the left screen. When approaching a guide point, the left screen automatically switches to an enlarged view of the intersection. To switch to the full screen mode, push . Pushing again displays the turn list. When approaching a guide point, the enlarged view of the intersection is automatically displayed. To display the turn list, push .
Black plate (114,1) MEMO 5-26 Route guidance Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (16,1) 6 Storing a location/route Storing a location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Storing a location by searching . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Storing the current vehicle location. . . . . . . . . . . . . . . . . . . . . 6-3 Storing a location by moving the map . . . . . . . . . . . . . . . . . 6-4 Storing a route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (116,1) STORING A LOCATION Locations that you often visit can be stored in the Address Book. The stored locations can be easily retrieved to set them as a destination or waypoint. INFO: . The Address Book can store up to 200 locations. . New information placed in the same storage position will overwrite the old data. 3. Highlight [Address Book] and push . 5. Highlight [Home Location (Add New)] or [None (Add New)] and push . 4. Highlight [Stored Location] and push . 6.
Black plate (117,1) 7. When your preferred location is displayed at the center of the map, confirm the location and push . A message is displayed, and the location is stored in the Address Book. INFO: . . 8. Adjust the location of the stored item and edit the contents of the stored item as necessary. After finishing the setting, highlight [OK] and push . 3. Highlight [Store Location] and push . A message is displayed, and the current vehicle location is stored in the Address Book.
Black plate (118,1) INFO: INFO: The location is stored in the first available position number in the Address Book list. Setting by voice command The location is stored in the first available position number in the Address Book list. 1. Push located on the steering switch. 2. After the tone sounds, speak a command. To store a current location: “Store Location” STORING A LOCATION BY MOVING THE MAP 1. Move to the preferred location on the map and push . 6-4 2.
Black plate (119,1) STORING A ROUTE A calculated route can be stored. A maximum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route. OTHER SETTINGS You can also store a route using the following procedure. INFO: Stored route includes only locations (destination and waypoints) and route calculation conditions, not the route itself. 1. Push . 2. Highlight [Route Information] and push . 3.
Black plate (120,1) STORING A TRACKED ROUTE INFO: . The route is stored in the first available position number in the store current route list. . A maximum of 5 routes can be stored. When 5 routes are stored in the Address Book, a new route cannot be stored until a route is deleted. “DELETING A STORED ITEM” (page 6-21) . If you have not set any waypoints on the route, the route cannot be stored. You can store the route you have traveled up to the current location.
Black plate (121,1) STORING AN AVOID AREA OTHER SETTINGS You can also store a tracked route using the following procedure. An Avoid Area can be stored. The Avoid Area is an area that you want to exclude from a route, such as a road that is always congested. Once you store Avoid Areas, the system avoids those areas when calculating a route. Up to 10 Avoid Areas can be stored. INFO: You can also access and store an Avoid Area from the Address Book. 1. Push . 4.
Black plate (122,1) 5. Highlight the appropriate method to search for a location and push . “4. Setting a destination” Available setting items . Rename: Changes the name. “Rename” (page 6-19) . Move Location: Adjusts the location of the Avoid Area. “Move Location” (page 6-19) . Resize Area: Adjusts the range of the Avoid Area. “Resize Area” (page 6-20) . FWY: Avoids freeways. “FWY” (page 6-20) . Delete: Deletes the avoid area. “Delete” (page 6-20) 7.
Black plate (123,1) EDITING THE ADDRESS BOOK Items stored in the Address Book can be modified. You can edit these settings to make the navigation system more useful. BASIC OPERATION 1. Push . 2. Highlight [Navigation] and push . 3. Highlight [Address Book] and push . 4. Highlight the preferred item and push . Available items . Stored Location: Edits the information of a stored home and location. “EDITING THE STORED HOME AND LOCATION” (page 6-9) .
Black plate (124,1) MINOR ADJUSTMENT OF THE STORED HOME AND LOCATIONS 3. Highlight the preferred item and push . Available setting items . Edit: Edits the stored location information. . Move Location: Adjusts the location of the stored location. . Delete: Deletes the stored location. . OK: Applies the settings. When you select [Edit], you can edit the following items of the home or stored location. . Show Icon on Map . Name (only for stored locations) . Voicetag (only for stored locations) .
Black plate (125,1) 1. Highlight [Edit] and push . 2. Highlight [Voice Tag] and push . 3. Enter the preferred name for the stored location. “CHARACTER (letter and number) INPUT SCREEN” (page 2-20) 6. If the system recognizes it, the voicetag is stored. 3. Highlight [Store] and push . 4. Highlight [OK] and push . The name is stored. Voicetag (only for stored locations) Stores a voicetag to be used for voice commands.
Black plate (126,1) Setting by voice command 1. Push located on the steering switch. 2. After the tone sounds, speak a command. To speak the stored voicetag: “Play Address Book” Icon Changes the icon of the home or stored location to the preferred one. By changing the icons, you can utilize the [By Icon] option of the sort function more effectively. 3. Highlight the preferred icon by scrolling the list using the main directional buttons or the center dial. Then push . 1.
Black plate (127,1) Icon List: Storing a location/route 6-13 Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (128,1) Sound Sets the tone of the arrival alarm that sounds when the vehicle approaches the home or a stored location. . The indicator of the selected alarm tone illuminates. Sound list: None Chime Melody Sound Dog 1. Highlight [Edit] and push . Cat 2. Highlight [Direction] and push . The home or stored location is displayed at the center of the map. Wave Church bell 1. Highlight [Edit] and push . 2. Highlight [Sound] and push .
Black plate (129,1) INFO: . While setting the direction, you can change the map scale. . After the direction is set, if you highlight [Direction] and push once again, a confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The set direction is cancelled. Distance Sets the alarm to sound when reaching a specific distance to the home or stored location.
Black plate (130,1) displayed. 3. Enter the telephone number of the home or stored location. “PHONE NUMBER INPUT SCREEN” (page 2-21) 1. Highlight [Edit] and push . 1. Highlight [Edit] and push . 2. Highlight [Group] and push . 2. Highlight [Entry Number] and push . A list of stored locations is displayed. 4. Highlight [OK] and push . The telephone number is stored.
Black plate (131,1) EDITING THE STORED ROUTE 5. After finishing the setting, highlight [OK] and push . EDITING THE STORED TRACKING INFO: 1. Highlight [Stored Routes] and push . 2. Highlight the preferred stored route and push . If you select [None (Add New)], the system stores the current route. Available setting items: . Rename: Changes the name. “CHARACTER (letter and number) INPUT SCREEN” (page 2-20) . Replace: Overwrites the stored route to the current route. .
Black plate (132,1) 3. Highlight the preferred item and push . Available setting items (Current tracking) . Map Scroll: Displays the tracked route up to the current location. . OK: Applies the settings. . Rename: Changes the name. “CHARACTER (letter and number) INPUT SCREEN” (page 2-20) . Replace: Overwrites the stored tracked route to the current tracked route. . Delete: Deletes the stored tracked route. . OK: Applies the settings.
Black plate (133,1) . Stored tracking is displayed up to 12 miles (20 km). EDITING THE AVOID AREA 1. Highlight [Avoid Area] and push . 2. Highlight the preferred Avoid Area and push . Available setting items . Rename: Changes the name. . Move Location: Adjusts the location of the Avoid Area. . Resize Area: Adjusts the range of the Avoid Area. . FWY: Avoids freeways. . Delete: Deletes the Avoid Area. . OK: Applies the setting. 4.
Black plate (134,1) route guidance. 2. Using the main directional or additional directional buttons, adjust the location of the Avoid Area. Delete Deletes the Avoid Area. 3. After adjusting the location, push . Resize Area Adjusts the range of the Avoid Area. 1. Highlight [FWY]. If you want to include freeways in the Avoid Area, push to illuminate this indicator. 1. Highlight [Delete] and push . 1. H i g h l i g h t [ R e s iz e A r e a ] a n d p u s h . 2.
Black plate (135,1) DELETING A STORED ITEM You can delete locations and routes stored in the Address Book. Two deletion methods are available, deleting an individual item and deleting all stored items. NOTE: Deleted items cannot be restored. Before deleting an item, always make sure that the item is truly not necessary. DELETING A STORED ITEM INDIVIDUALLY 3. Highlight [Address Book] and push . Example: [Stored Location] is selected. 1. Push . 2. Highlight [Navigation] and push .
Black plate (136,1) 7. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The stored item is deleted from the Address Book. DELETING AN INDIVIDUAL ITEM ON THE MAP 3. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The stored item is deleted from the Address Book. 3. Highlight [Address Book] and push . DELETING ALL STORED ITEMS 1.
Black plate (137,1) . . 5. Highlight the preferred item for deletion and push . Items that can be deleted . Delete Home Location: Deletes the home location. . Delete Stored Locations: Deletes all stored locations. . Delete Stored Routes: Deletes all stored routes. . Delete Current Tracking: Deletes the current tracked route. . Delete Stored Tracking: Deletes all stored tracked routes. . Delete Avoid Areas: Deletes all stored Avoid Areas. . Delete Stored Voicetags: Deletes all stored voicetags. .
Black plate (138,1) MEMO 6-24 Storing a location/route Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (19,1) 7 Viewing technical information Information screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Viewing available traffic information . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Info on route . . . . . . . . . .
Black plate (140,1) INFORMATION SCREEN This screen allows you to set or view various information that is helpful for using the vehicle safely and comfortably, such as maintenance information, Traffic Info. setup (XM® NavTrafficTM subscription is required), current location information, GPS information, Voice recognition list and map version. BASIC OPERATION 1. Push . 2. Highlight the preferred item and push . Available items . Fuel Economy: Refer to the vehicle Owner’s Manual. 7-2 .
Black plate (141,1) VIEWING AVAILABLE TRAFFIC INFORMATION XM® NavTrafficTM information is a subscription service offered by XM® Satellite Radio. This service provides real-time information regarding traffic flow, accidents, road construction and other incidents, where available. XM® NavTrafficTM combines information from commercial and public traffic data providers including government departments of transportation, police, emergency services, road sensors, cameras and aircraft reports.
Black plate (142,1) . Traffic Info. Settings: Allows you to confirm or change the settings for the traffic information related functions. “Traffic Information Settings” (page 5-15) NEARBY TRAFFIC INFO. The list of available traffic information around the current vehicle location is displayed. A maximum of 400 events can be displayed. INFO ON ROUTE This is only available when a route is set.
Black plate (143,1) 3. The map screen centered around the selected event is displayed. On the left screen, the detailed information about the event is displayed. You can scroll the message by using the up/down button of directional switch or the steering switch. 1. Highlight [User Locations] and push . A list screen is displayed. 4. Push to return to the previous screen. USER LOCATIONS You can check the traffic information around stored locations.
Black plate (144,1) DISPLAY URGENT TRAFFIC INFORMATION When an urgent event is found around the current vehicle location, a message pops up automatically with a voice announcement. INFO: . Urgent traffic information is displayed regardless of whether the traffic information system is on or off. . When there are multiple urgent events, the event with the shortest direct distance from the current location is displayed. .
Black plate (145,1) : Accident : Closed road : Information : Road work : Slippery road : Weather : Incident 4. Screen information 1. Road conditions Free Flow: Green arrow Moderate traffic: Yellow arrow Heavy traffic: Red arrow Section affected by serious traffic event: Purple dashed arrow 3. Traffic information icon: If the route is not already set, all of the traffic information icons on the map screen are displayed in color.
Black plate (146,1) Traffic information can be displayed in the following scale levels Plan View Birdview Actual distance Distance between grids 5 miles (10 km) — 2 miles (4 km) — 1 mile (2 km) 4 miles (8 km) 1/2 mile (1 km) 2 miles (4 km) 1/4 mile (500 m) 1 mile (2 km) 1/8 mile (200 m) 1/2 mile (1 km) 300 ft (100 m) 1/4 mile (500 m) 1/6 mile (250 m) 150 ft (50 m) Checking detailed information for the traffic information icons on the map 1.
Black plate (147,1) VIEWING INFORMATION ABOUT CURRENT VEHICLE LOCATION This allows you to display the information about the vehicle location on the route when driving according to route guidance. VIEWING GPS CURRENT LOCATION INFORMATION Contents of vehicle location information 1 Next Street: & This allows you to display GPS information, such as the positioning status, latitude/longitude, altitude and satellite locations. Displays the next street on the route.
Black plate (148,1) VIEWING NAVIGATION SYSTEM VERSION INFORMATION Contents of GPS information This allows you to display the map version information. 1 Calculation: & Displays the GPS positioning method. 3-dimension Calculating the latitude, longitude and altitude by four or more satellites. 2-dimension Calculating the latitude, longitude and altitude by three or more satellites. Out of range Cannot calculate because no GPS satellites can be located.
Black plate (22,1) 8 Other settings Settings screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Display . . . . .
Black plate (152,1) SETTINGS SCREEN The navigation system can be customized to make it easier for you to use. BASIC OPERATION 1. Push . 2. Highlight the preferred setting item and push . Available setting items . Display: “DISPLAY SETTINGS” (page 8-2) . Audio: Refer to the vehicle Owner’s Manual. . Navigation: Allows you to adjust various settings of the navigation system. “NAVIGATION SETTING” (page 8-4) . Rear display: Refer to the vehicle Owner’s Manual. 8-2 DISPLAY SETTINGS .
Black plate (153,1) brightness changes. Available setting items . Display: Allows you to turn on/off the screen. “DISPLAY” (page 8-3) . Brightness: Allows you to adjust the screen brightness. “BRIGHTNESS” (page 8-3) . Contrast: Allows you to adjust the screen contrast. “CONTRAST” (page 8-3) . Background Color: Allows you to set the background color. “BACKGROUND COLOR” (page 8-3) DISPLAY CONTRAST When any button is pushed with the display off, the display turns on.
Black plate (154,1) NAVIGATION SETTING By setting the navigation in detail, you can set the navigation to your preference. Bright background color BASIC OPERATION 1. Push . 2. Highlight [Navigation] and push . 3. Highlight the preferred setting item and push . Dark background color Available setting items . Landmark Icons: Sets the landmark icons that you desire to display on the map. “DISPLAYING LANDMARK ICONS” (page 3-19) .
Black plate (155,1) . . . . . “CUSTOMIZING NEARBY PLACES” (page 8-5) Map Scrolling Information: Performs the setting so that when the map is scrolled, the information of the location aligned at the center of the cross pointer is displayed. “MAP SCROLLING INFORMATION” (page 3-20) Map Color Settings: Switches the map color. “MAP COLOR SETTINGS” (page 8-6) Audio Display on Map: Allows the AV information to be displayed at all times.
Black plate (156,1) MAP COLOR SETTINGS Available map colors This allows you to change the map color. Warm: Sets warm colors for the map coloring. Cool: Sets cool colors for the map coloring. INFO: 4. Highlight a main category and push . The sub category list is displayed. 1. Highlight [Navigation] and push . 2. Highlight [Map Color Settings] and push . You can confirm the effect of your setting on the preview displayed on the right side of the screen.
Black plate (157,1) 2. Highlight [Audio Display on Map] and push . The indicator illuminates when the item is set. 3. Push to return to the current location map screen. 1. Highlight [Navigation] and push . ABC layout 2. Highlight [Keyboard Input] and push . 4. On the bottom of the map screen, the operating status of an audio/visual function is displayed at all times.
Black plate (158,1) is displayed in Plan View when adjusting the position of the vehicle icon. . When you correct the position of the vehicle icon, the map is automatically displayed in the North Up mode. After finishing the correction, the map restores the current orientation setting. . The position and direction of the vehicle icon may be misaligned depending on the external conditions and environment. .
Black plate (159,1) VOLUME ADJUSTMENT This allows you to turn on and off, as well as adjust, the phone function (ringer, incoming and outgoing volume), the voice guide function and the beep function. BASIC OPERATION 1. Highlight [Navigation] and push . 2. Highlight [Reset ALL navigation settings to default] and push . 1. Push . 2. Highlight [Volume and Beeps] and push . 3. Highlight the preferred adjustment item and push . 3. A confirmation message is displayed.
Black plate (160,1) CLOCK SETTINGS when the beep function is set to on. The beep that sounds when pushing and holding a button or when a prohibited operation is performed cannot be set to off. This allows you to change the clock settings. BASIC OPERATION INFO: For more details about [Ringer Vol.], [Incoming Call] and [Outgoing Call], refer to the vehicle Owner’s Manual. 1. Push . 2. Highlight [Clock] and push . 3. Highlight the preferred adjustment item and push . 4.
Black plate (161,1) LANGUAGE AND UNIT SETTINGS — Newfoundland — Hawaii — Alaska This allows you to change the language and measurement unit used in the system. LANGUAGE SETTINGS 1. Push . 2. Highlight [Others] and push . 3. Highlight [Language/Units] and push . 5. Highlight the preferred setting item and push . The indicator light of the selected item illuminates. Available languages — English — Français NOTE: .
Black plate (162,1) UNIT SETTINGS 1. Push . 2. Highlight [Others] and push . 3. Highlight [Language/Units] and push . 5. Highlight the preferred unit and push . The indicator of the selected unit illuminates. Available units — US: mile, MPH, 8F, MPG — Metric: km, km/h, 8C, L/100 km 6. Push to return to the previous screen. Push to return to the current location map screen. 4. Highligh t [Sele ct U nits] a nd pu sh .
Black plate (25,1) 9 Voice recognition NISSAN voice recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Displaying how to operate the voice recognition system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Confirming voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (166,1) NISSAN VOICE RECOGNITION DISPLAYING HOW TO OPERATE THE VOICE RECOGNITION SYSTEM NISSAN Voice Recognition allows hands-free operation of the navigation system and other systems equipped on this vehicle, such as the display, audio, climate control and phone. If you use the voice recognition system for the first time or you do not know how to operate it, you can display the voice command list or user guide for confirmation.
Black plate (167,1) . . . Route: Allows you to set a route in detail. Others: Allows you to store locations or set the route guidance. 5. Highlight [Navigation] and push . Command List INFO: The voice command description in this manual can be expressed in various ways. Different phrases are available depending on the conditions of each command. Words that are not in brackets or parenthesis must be spoken.
Black plate (168,1) Navigation Command: Destination Command Action Destination Home Sets a route to your home that is stored in the Address Book. Destination Address Book Sets a route to a location stored in the Address Book. Destination Sets a route to a stored location that has the voicetag specified. Destination Nearby Sets a route to the POI category near the current vehicle location.
Black plate (169,1) Map Command Action Show Current Location Displays the current location map screen. Landmark Icons Displays all the landmark icons. Landmark Icons Displays the landmark icons of the specified POIs. Planview map Displays the map in Plan View. Birdview map Displays the map in BirdviewTM. Planview Split Map Displays the map in Split (Plan View). Birdview Split Map Displays the map in Split (BirdviewTM). North Up Sets the orientation of the map to North Up.
Black plate (170,1) Route Command Action Fastest Route Sets the route search condition to Fastest Route. Minimize Freeway Sets the route search condition to Minimize Freeway. Shortest Route Sets the route search condition to Shortest Route. Cancel Route Cancels the route setting. Detour Calculates a detour. Route Information Displays the route information. Recalculates a route. Recalculate Others Command Action Traffic Info. Turn on/off the traffic information system.
Black plate (171,1) CONFIRMING HOW TO USE VOICE COMMANDS You can confirm how to use voice commands by displaying a simplified User Guide or by displaying simulated voice command operations. . . . . Basic operation . 1. Push . 2. Highlight [Others] and push . 3. Highlight [Voice Recognition] and push . . ing how to operate the voice recognition system. Using the Address Book: Simulates voice commands to set a destination by the Address Book.
Black plate (172,1) Simulating the operation of voice recognition system 2. The voice guide informs you about how to speak to give commands in an actual case. 1. Highlight [Help on Speaking] and push . 2. You can confirm the page by scrolling the screen using the up and down switches of the main directional buttons or the center dial.
Black plate (173,1) Confirming the learning function BEFORE STARTING The voice recognition system is equipped with a learning function to adapt to the user’s voice for better recognition. You can confirm how to operate the learning function through the simulation. To get the best recognition performance out of NISSAN Voice Recognition, observe the following: . The interior of the vehicle should be as quiet as possible.
Black plate (174,1) GIVING VOICE COMMANDS speak a command. Operating tips 1. Push located on the steering switch. . If the command is not recognized, the system announces, “Please say a command”. Repeat the command in a clear voice. . Push once to return to the previous screen. . If you want to cancel the command, push and hold . The message, “Voice cancelled” will be announced. . When you do not say a command, the system pauses the operation. Push to restart the operation. .
Black plate (175,1) PERSONAL VOCABULARY (voicetags) How to set NISSAN Voice Recognition includes a function that allows you to input personal names for locations to be recognized by the system. These are called “voicetags”. Using your own voice, voicetags can be assigned to 10 locations stored in the Address Book. For further details about storing voicetags, refer to section 6. “EDITING THE STORED HOME AND LOCATION” (page 6-9) 1. Push . 2. Highlight [Others] and push . 3.
Black plate (176,1) 5. Select the user whose voice is memorized by the system, and push . 7. Select the voice command to be learned by the system, and push . The voice recognition system starts. 10. When the system has recognized the voice command, the voice of the user is learned. Push once to return to the previous screen.
Black plate (177,1) correctly, the voice command indicator on the screen illuminates. Editing registered items You can edit user names and select learning function settings. 5. Select the user whose settings you desire to edit, and push . 1. Push . 2. Highlight [Others] and push . 3. Highlight [Voice Recognition] and push . 4. Highlight [Voice Command Learning] and push . 6. Highlight [Setting] and push . 7. Setting items .
Black plate (178,1) VOICE COMMAND EXAMPLES To use the voice recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here. 1. Push located on the steering switch. Example 2: Setting a destination using a nearby place Example 1: Switching the map to the Plan View mode 2. The system announces, “Please say a command”. 3.
Black plate (179,1) “Destination nearby places”. Example 3: Setting a destination by a street address 4. Voice feedback will be provided when the command is accepted, and the list of POI categories appears. 8. Voice feedback will be provided when the command is accepted, and the list of Points of Interest in the category specified in the previous step appears. 5. After the tone sounds and the icon on the screen changes again, speak “Three”. 9.
Black plate (180,1) 4. Speak the name of the state, “California”. 6. Speak the name of the street, “South figueroa street”. INFO: Only the official street names stored in the map data can be recognized by the system. You need to speak the street name precisely including boulevard, way, north, south, etc. In this case, you cannot speak “Figueroa street” or “Figueroa”. 7. Voice feedback will be provided when the command is accepted, and the list of street names appears. 8.
Black plate (181,1) INFO: If you do not know the house number, speak “No house number”. 10. To confirm the destination location on the map, speak “Show map”. To calculate a route, speak “Calculate route”.
Black plate (182,1) MEMO 9-18 Voice recognition Model "NAV2-N" EDITED: 2007/ 3/ 9
Black plate (28,1) 10 General system information Features of this navigation system . . . . . . . . . . . . . . . . . . . . . . . . Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Points of Interest (POI) directory. . . . . . . . . . . . . . . . . . . . . . Address book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Avoid area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (184,1) FEATURES OF THIS NAVIGATION SYSTEM ROUTE GUIDANCE The main features of the NISSAN Navigation System are visual guidance and voice guidance in selected map coverage areas. Utilizing a network of GPS (Global Positioning System) satellites, the NISSAN Navigation System tracks your location on the map and navigates you to a preferred location.
Black plate (185,1) CURRENT VEHICLE LOCATION DETOUR VOICE GUIDANCE If you want to make a detour due to traffic conditions, you can use the Detour function to calculate an alternative route. The NISSAN Navigation System can calculate a route using secondary roads that will return you to primary roads after a specified number of miles. For more information on the Detour function, refer to section 5.
Black plate (186,1) GPS signals (indicator color: gray). * * Under multi-layered highways * In a canyon Inside tunnels or parking garages INFO: The GPS antenna is located on the instrument panel inside the vehicle. Do not place any objects, especially mobile phones or transceivers, on the instrument panel. Because the strength of the GPS signal is approximately one billionth of that of TV waves, phones and transceivers will affect or may totally disrupt the signal.
Black plate (187,1) Display of GPS information GPS information can be displayed. “VIEWING GPS CURRENT LOCATION INFORMATION” (page 7-9) NOTE: Route guidance provided by the navigation system does not take carpool lane driving into consideration, especially when carpool lanes are separated from other road lanes. * When there is a similar road nearby. * When the vehicle is passing through a large Yshaped intersection/junction. * When the vehicle is traveling in an area with a grid pattern road system.
Black plate (188,1) * When the vehicle is traveling on a road with repeating S-shaped curves. * When the vehicle is on a snow-covered or unpaved road. * When the vehicle is rotated on a parking lot turntable while the ignition switch is off. * When the vehicle is on a loop bridge. * When repeatedly turning left or right, or driving in zigzags. * When driving on a road not displayed on the map screen or a road that has been changed due to additional construction or other reasons.
Black plate (189,1) “ADJUSTING THE CURRENT VEHICLE LOCATION” (page 8-7) DETAILED MAP COVERAGE AREAS (MCA) FOR THE NAVIGATION SYSTEM * When the GPS positioning accuracy is low. INFO: . The vehicle icon may be misaligned when starting the vehicle just after starting the engine. . The vehicle icon may also be misaligned if different sized tires or tire chains are installed. . The system has a function that automatically corrects the vehicle icon position when it is misaligned from the actual position. .
Black plate (190,1) ROUTE CALCULATION . There may be cases that carpool lanes are included on a suggested route when the automatic rerouting function is activated, even if the “Use Time Restricted Roads” is turned off. “SETTING CONDITIONS FOR THE ROUTE CALCULATION” (page 5-14) . The navigation system does not provide route guidance for roads displayed in dark green. .
Black plate (191,1) ROUTE GUIDANCE — If the destination, current vehicle position or waypoint is within the “Avoid Area”. — If a part of the route is included in the “Avoid Area”. . The following may occur when the route is displayed. — If you calculate a route on a main road, the starting point of the route may not exactly match the current vehicle location. — The endpoint of the route may not exactly match the destination.
Black plate (192,1) . Route guidance provided by the navigation system does not take carpool lane driving into consideration, especially when carpool lanes are separated from other road lanes. DIRECTIONS PROVIDED AND THE DISTANCES TO GUIDE POINTS 1. “In about one quarter mile (400 meters), right (left) turn.” Notification of a freeway entrance 2. “Right (left) turn ahead.” Notification of consecutive intersections on an ordinary road Directions will differ, depending on the road type.
Black plate (193,1) Notification of a freeway junction Notification of a freeway exit 1. “In about one mile (1.6 kilometers), exit on your right.” 2. “Take the second exit on your right.” 1. “In about one mile (1.6 kilometers), keep to the right (left) onto (road number and direction), then in about one quarter mile (400 meters) keep to the right (left).” 2.
Black plate (194,1) will not be provided in these areas.” When approaching the endpoint of the suggested road, voice guidance will announce, “Entering the road with incomplete map data. Please use the direction arrow and distance information to proceed to your destination.” . REPEATING VOICE GUIDANCE . This function is available throughout route guidance, from the time after the route calculation is completed until the vehicle arrives at the destination. Push . Voice guidance will be repeated.
Black plate (195,1) NOTES ON XM® NavTrafficTM INFORMATION . Because it is not possible to consider data concerning roads that are seasonally available or unavailable, a route may be displayed that does not match the actual traffic restrictions. Be sure to follow the actual traffic restrictions while driving. . Canada and Alaska contain many roads with incomplete map data. As a result, when searching for a route, the route may include roads with incomplete data.
Black plate (196,1) MAP DATA — Phoenix, AZ — Pittsburgh, PA — Portland, OR* — Providence - Warwick - Pawtucket, RI — Sacramento, CA — San Antonio, TX* — San Diego, CA — San Francisco - Oakland, CA — San Jose, CA — Seattle - Tacoma, WA — St. Louis, MO* — Tampa - St Petersburg - Clearwater, FL — Washington, DC — Wilmington, DE * Without traffic flow information . Due to road maintenance, infrastructure problems (e.g.
Black plate (197,1) C 2002 Navigation Technologies. All rights * reserved. “Certain business data provided by infoUSA.com, Inc. Copyright 2002. All rights reserved”. WARNING . This navigation system should not be used to replace your own judgement. No itinerary suggested by this navigation system should ever override any highway regulations, your own judgement, or a knowledge of safe driving practices.
Black plate (198,1) road conditions. Always rely on your own judgement when driving a car, taking into account current driving conditions. “The company trademarks used in this product to identify locations and business offices are the trademarks of their respective owners. Their use does not represent sponsorship, approval or recommendation of this product by these companies.” END-USER TERMS The data (“Data”) is provided for your personal, internal use only and not for resale.
Black plate (199,1) use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error-free. Disclaimer of Warranty: ZENRIN CO., LTD. AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Black plate (200,1) HOW TO HANDLE THE DISPLAY If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify NAVTEQ prior to seeking additional or alternative rights in the Data. The display is a liquid crystal display and should be handled with care. WARNING Never disassemble the display. Some parts utilize extremely high voltage.
Black plate (31,1) 11 Troubleshooting guide Customer assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vehicle icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Route calculation and visual guidance . . . . . . . . . . . . . . . . . . . 11-2 11-3 11-4 11-6 Voice guidance. . . . . . . . . . . . . .
Black plate (204,1) CUSTOMER ASSISTANCE For assistance or inquiries about the NISSAN Navigation System, contact the NISSAN NAVIGATION SYSTEM HELPDESK. See the contact information on the inside front cover of this manual.
Black plate (205,1) BASIC OPERATIONS Symptom No image is displayed. No voice guidance is available. or The volume is too high or too low. No map is displayed on the screen. The screen is too dim. The movement is slow. Possible cause The brightness is at the lowest setting. Possible solution Adjust the brightness of the display. The system in the video mode. Push to change the mode. Refer to the vehicle Owner’s Manual. The display is turned off. Push to turn on the display.
Black plate (206,1) VEHICLE ICON Symptom Possible cause Possible solution Names of roads and locations differ between Plan View and BirdviewTM. This is because the quantity of the displayed information is reduced so that This is not a malfunction. the screen does not become too crowded. There is also a chance that names of the roads or locations may be displayed multiple times, and the names appearing on the screen may be different because of a processing procedure.
Black plate (207,1) Symptom The location of the vehicle icon is misaligned from the actual position. Possible cause Possible solution When using tire chains or replacing the tires, speed calculations based on Drive the vehicle for a while (at approximately 19 the speed sensor may be incorrect. MPH for about 30 minutes) to automatically correct the vehicle icon position. If this does not correct the vehicle icon position, contact a NISSAN dealer.
Black plate (208,1) ROUTE CALCULATION AND VISUAL GUIDANCE Symptom Possible cause Possible solution Waypoints are not included in the auto reroute calculation. Waypoints that you have already passed are not included in the auto reroute calculation. If you want to go to that waypoint again, you need to edit the route. Route information is not displayed. Route calculation has not yet been performed. Set the destination and perform route calculation. You are not driving on the suggested route.
Black plate (209,1) Symptom An indirect route is suggested. The landmark information does not correspond to the actual information. Possible cause Possible solution If there are restrictions (such as one-way streets) on roads close to the Adjust the location of the starting point or destination. starting point or destination, the system may suggest an indirect route.
Black plate (210,1) VOICE GUIDANCE Symptom Voice guidance is not available. Possible cause Voice guidance is only available at certain intersections marked with In some cases, voice guidance is not available even when the vehicle should make a turn. Possible solution . This is not a malfunction. The vehicle has deviated from the suggested route. Go back to the suggested route or request route calculation again. Voice guidance is set to off. Turn on voice guidance. Route guidance is set to off.
Black plate (211,1) VOICE RECOGNITION Symptom The system does not recognize your command. or The system recognizes your command incorrectly. Possible cause Possible solution The interior of the vehicle is too noisy. Close the windows or have other occupants be quiet. The volume of your voice is too low. Speak louder. The volume of your voice is too loud. Speak softer. Your pronunciation is unclear. Speak clearly. You are speaking before the voice recognition mode is ready.
Black plate (212,1) TRAFFIC INFORMATION Symptom The traffic information is not displayed. Possible cause The traffic information is not set to on. Possible solution Set the traffic information to on. You are in an area where traffic information is not available. Scroll to an area where traffic information is available. You have not subscribed to XM® NavTrafficTM, or your subscription to XM® NavTrafficTM has expired. Check your subscription status of XM® NavTrafficTM.
Black plate (1,1) 12 Index CURRENT LOCATION MAP SCREEN Store Location page 6-2 Nearby page 4-14 Map Settings Change View Settings Plan View page 3-12 Birdview page 3-12 Split (Plan View) page 3-12 Split (Birdview) page 3-12 North Up page 3-14 Heading Up page 3-14 Long Range Map View page 3-14 Map Scale page 3-14 Birdview Angle page 3-14 Left Settings page 3-18 Right Settings page 3-18 Model "NAV2-N" EDITED: 2007/ 3/ 8
Black plate (2,1) Landmark Icons page 3-19 Store Tracking page 6-6 Guide Screen page 5-19 Model "NAV2-N" EDITED: 2007/ 3/ 8
Black plate (3,1) SCROLL LOCATION MAP SCREEN New Dest. Start page 5-2 Route Details page 5-2 Move Dest. page 4-25 Add to Route page 4-26 Store Dest. page 4-26 POI Info.
Black plate (4,1) DESTINATION SCREEN Change Region page 4-3 Street Address page 4-4 Points of Interest page 4-5 Home page 4-13 Address Book page 4-13 Nearby Places page 4-14 Previous Dest.
Black plate (5,1) ROUTE SCREEN Cancel Route page 5-6 Resume Route Edit Route Information page 5-7 Turn List page 5-11 Preview page 5-12 Simulation page 5-12 Store Route page 6-5 Map Scroll page 5-11 Traffic Detour Route Settings page 5-6 page 5-12 Fastest Route page 5-14 Minimize Freeway page 5-14 Shortest Route page 5-14 Detailed Route Settings page 5-14 Model "NAV2-N" EDITED: 2007/ 3/ 8
Black plate (6,1) Recalculate page 5-16 Detour page 5-17 Guidance Settings Guidance Screen Default page 5-19 Route Guidance page 5-18 Guidance Voice page 5-18 Traffic Info. Settings page 5-18 Estimated Travel Time page 5-20 Exit Info.
Black plate (7,1) SETTING SCREEN Display Navigation Display page 8-3 Brightness page 8-3 Contrast page 8-3 Background Color page 8-3 Landmark Icons page 3-19 Map Settings page 3-12 Guidance Settings page 5-18 Traffic Info.
Black plate (8,1) Audio Display on Map page 8-6 Keyboard Input page 8-7 Small Step Zoom by Dial page 8-4 Auto North Up Zoom page 8-4 Adjust Current Location page 8-7 Reset ALL Navigation Settings to Default page 8-8 Volume and Beeps page 8-9 Clock page 8-10 Others Voice Recognition Language / Units Command List page 9-2 Minimize Voice Feedback page 9-11 Voice Command Learning page 9-11 User Guide page 9-7 Select Language page 8-11 Select Units page 8-12 Model "NAV2-N" EDITED:
Black plate (9,1) INFORMATION SCREEN Traffic Info. Info on Route page 7-4 Nearby Traffic info. page 7-4 User locations page 7-5 Traffic Info. Settings page 5-15 Where am I? page 7-9 GPS Satellite Info.
Black plate (10,1) Navigation Version Voice Recognition Settings page 9-8 Adapting the System to Your Voice page 9-9 page 7-10 Model "NAV2-N" EDITED: 2007/ 3/ 8
Black plate (1,1) A About route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23 About the map data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14 Adding a destination or waypoint. . . . . . . . . . . . . . . . . . . 5-4 Adding additional destinations to a route . . . . . . . . 4-26 Address book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2 Adjusting the current vehicle location . . . . . . . . . . . . . .
Black plate (2,1) List screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Looking at information on the map . . . . . . . . . . . . . . . 3-19 Operation with split screen display. . . . . . . . . . . . . . . 3-18 Operations after setting a destination . . . . . . . . . . . . 4-24 Other settings for the map screen . . . . . . . . . . . . . . . 3-12 M Maintenance of the display. . . . . . . . . . . . . . . . . . . . . . . 10-18 Map color settings . . . . . . .
Black plate (3,1) T W Touch panel operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 Traffic information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-10 Traffic information on map. . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Turning voice guidance on/off . . . . . . . . . . . . . . . . . . . . 2-18 What is GPS (Global Positioning System)?. . . . . 10-3 When a gray road is displayed on the map . . . . .
Black plate (36,1) MEMO 2-28 Getting started Model "NAV2-N" EDITED: 2007/ 3/ 9