Owner's Manual User guide
REPLACING
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab
䊊
A
, and then
move the wiper blade down
䊊
1
the wiper
arm to remove.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
CAUTION
● After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
● Make sure the wiper blades contact the
glass; otherwise the arms may be dam-
aged from wind pressure.
Be careful not to let anything get into the washer
nozzle
䊊
A
. This may cause clogging or improper
windshield washer operation. If something gets
into the nozzle, remove it with a needle or small
pin
䊊
B
.
SDI1803
WDI0526
Maintenance and do-it-yourself 8-21
墌 REVIEW COPY—
2009 Versa (vrs)
Owners Manual—USA_English (nna)
09/10/08—debbie
墍