2010 Cube Automobile Owner's Manual

Black plate (18,1)
Model "Z12-D" EDITED: 2009/ 9/ 17
SSS0961
REAR SEATS (if so equipped)
Forward and backward
Pull the lever
*
1
up and hold it while you slide
the seat forward or backward to the desired
position. Release the lever to lock the seat in
position.
Reclining
To recline the seatback, pull the strap
*
2
and
lean back. To bring the seatback forward, pull
the strap up and lean your b ody forward.
Release the strap to lock th e seatback in
position.
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
USAGE” later in this section.)
Folding
Before folding the rear seats:
. Secure the seat belts on the seat belt hooks
on the side wall. (See “Seat belt hooks
(except for Cargo Van models)” later in this
section.)
. Release the connector tongue of the rear
center seat belt from the buckle, and secure
the connector and seat belt tongues on the
seat belt hook. (See “Rear center seat belt
(except for Cargo Van models)” later in this
section.)
1-4 Safety — Seats, seat belts and supplemental restraint system