Owner's Manual Instruction Manual

Be careful that your vehicle does not exceed the
Gross Vehicle Weight Rating (GVWR) or its
Gross Axle Weight Rating (GAWR front and
rear). The GVWR and GAWR are located on the
F.M.V.S.S. label (located on the driver’s door
pillar). For more information regarding GVWR
and GAWR, refer to “Vehicle loading information”
in the “Technical and consumer information” sec-
tion later in this manual.
The front and rear cross bars (if so equipped) can
be adjusted or removed.
To adjust:
1. Loosen the 2 Torx姞 head fasteners
䊊
A
on
both ends of the crossbar.
2. Remove the plugs at the desired position
(
䊊
C
).
3. Slide the crossbar
䊊
B
to the desired position
(
䊊
C
) so that the holes in the crossbar line up
with the holes in the sidebar.
4. Tighten the 2 Torx姞 head fasteners on both
ends of the crossbar.
5. Reinstall the plugs at the previous position
䊊
A
.
6. Position your luggage on the crossbars and
secure the luggage with rope.
7. Always check the tightness of the Torx姞
head fasteners.
To remove:
1. Loosen the 2 Torx姞 head fasteners
䊊
A
on
both ends of the crossbar.
2. Remove the crossbar from the roof rack.
POWER WINDOWS
WARNING
● Make sure that all passengers have
their hands, etc. inside the vehicle while
it is in motion and before closing the
windows. Use the window lock switch
to prevent unexpected use of the power
windows.
● Do not leave children unattended inside
the vehicle. They could unknowingly ac-
tivate switches or controls and become
trapped in a window. Unattended chil-
dren could become involved in serious
accidents.
The power windows operate when the ignition
switch is placed in the ON position, or for a
period of time after the ignition switch is placed in
the OFF position. If the driver’s or passenger’s
door is opened during this period of time, the
power to the windows is canceled.
WINDOWS
Instruments and controls 2-45