Owner's Manual Instruction Manual

IGNITION SWITCH POSITIONS
Push in the ignition switch to the
䊊
B
position
when you turn it.
LOCK (Normal parking position)
䊊
A
:
The ignition switch can only be locked in the
LOCK position.
The ignition switch will be unlocked when it is
pushed in, and turned to the ACC position
䊊
C
while carrying the Intelligent Key.
ACC (Accessories)
䊊
C
:
This position activates electrical accessories
such as the radio, when the engine is not running.
ON (Normal operating position)
䊊
D
:
This position turns on the ignition system and the
electrical accessories.
START
䊊
E
:
This position starts the engine. As soon as the
engine has started, release the ignition switch
immediately. It will automatically return to the ON
position.
The ignition switch cannot be turned back to the
LOCK position unless the shift selector is in the P
(Park) position. (It can be turned only to the
䊊
B
position.)
CAUTION
Do not leave the vehicle with the ignition
switch in ACC or ON positions when the
engine is not running for an extended pe-
riod. This can discharge the battery.
AUTOMATIC TRANSMISSION
The ignition lock is designed so the ignition
switch cannot be placed in the LOCK position
and the key cannot be removed until the shift
selector is moved to the P (Park) position.
When removing the key from the ignition switch,
make sure the shift selector is in the P (Park)
position.
If the shift selector is not returned to P (Park)
position, the ignition switch cannot be placed in
the LOCK position.
WSD0041
Starting and driving 5-11