Owner's Manual Owner manual

Black plate (118,1)
[ Edit: 2012/ 5/ 18 Model: S35-D ]
2-48 Instruments and controls
SIC3510
Sliding the moonroof
GUID-E58CB540-F94C-4392-847D-DF07AA0A152B
To fully open or close the moonroof, push the
switch toward
*
1
or
*
2
and release
it; it need not be held. The roof will automatically
open or close all the way. To stop the roof, push
the switch in any direction while it is opening or
closing.
Tilting the moonroof
GUID-F8514024-28D3-4F20-A4B9-9C5D9274A6BB
To tilt up, first close the moonroof by pushing the
switch toward
*
2
. Push the switch toward
*
2
again and release it; it need not be
held. To tilt down the moonroof, push the switch
toward
*
1
.
Auto reverse function
S35-D-110201-AF18E966-5C54-4980-BC51-E872555FB4DF
WARNING
There are some small distances imme-
diately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., in-
side the vehicle before closing the
moonroof.
If the control unit detects something caught in
the moonroof when it is closing, the moonroof
will be immediately opened.
The auto reverse function can be activated when
the moonroof is closed by automatic operation
when the ignition switch is in the ON position or
for about 45 seconds after the ignition switch is
turned to the OFF position.
If the moonroof cannot be closed automatically
when the auto reverse function activates due to
a malfunction, push and hold the switch toward
*
2
.
Depending on the environment or driving
conditions, the auto reverse function may
be activated if an impact or load similar to
something being caught in the moonroof
occurs.
If the moonroof does not operate
GUID-750E5F7D-B6E5-4E9E-9714-1DE514A949D8
If the moonroof does not operate properly,
perform the following procedure to initialize the
moonroof operation system.
1. If the moonroof is open, close it fully by
repeatedly pushing the switch toward
*
2
.
2. Push and hold the switch toward
*
2
to
tilt the moonroof up.
3. Release the moonroof switch after the
moonroof moves slightly up and down.
4. Push and hold the switch toward
*
1
to
fully tilt the moonroof down.
5. Check if the moonroof switch operates
normally.
If the moonroof does not operate properly after
performing the procedure above, have your
vehicle checked by a NISSAN dealer.