Owner's Manual Owner manual

Black plate (91,1)
[ Edit: 2012/ 5/ 18 Model: S35-D ]
INDICATORS FOR MAINTENANCE
S35-D-110201-800F6ACB-DB84-4028-98D1-DAACB7798F91
1. Service due indicator
S35-D-110201-CFD2A761-A4C9-4CF4-8BE3-496BCDE236AC
This indicator appears when the customer set
distance comes for service due, for example, for
engine oil and oil filter. You can set or reset the
distance for service due. (See “Trip computer”
later in this section.) For scheduled maintenance
items and intervals, see your NISSAN Service
and Maintenance Guide.
2. Tire replacement indicator
S35-D-110201-CE0B87AB-634A-4111-8740-7919E54C2B20
This indicator appears when the customer set
distance comes for replacing tires. You can set
or reset the distance for replacing tires. (See
“Trip computer” later in this section.)
WARNING
The tire replacement indicator is not a
substitute for regular tire checks, in-
cluding tire pressure checks. See
“Changing wheels and tires” in the “8.
Maintenance and do-it-yourself” sec-
tion. Many factors including tire infla-
tion, alignment, driving habits and road
conditions affect tire wear and when
tires should be replaced. Setting the
tire replacement indicator for a certain
driving distance does not mean your
tires will last that long. Use the tire
replacement indicator as a guide only
and always perform regular tire checks.
Failure to perform regular tire checks,
including tire pressure checks could
result in tire failure. Serious vehicle
damage could occur and may lead to a
collision, which could result in serious
personal injury or death.
3. “OTHER” indicator
S35-D-110201-ED731025-DFE8-493E-8EAF-5AFA33B448D9
This indicator appears when the customer set
distance comes for checking or replacing
maintenance items other than the engine oil, oil
filter and tires. Other maintenance items can
include such things as air filter or tire rotation.
You can set or reset the distance for checking or
replacing the items. (See “Trip computer” later in
this section.) For scheduled maintenance items
and intervals, see your NISSAN Service and
Maintenance Guide.
SIC4551
TRIP COMPUTER
S35-D-110201-032DC1AF-C190-4089-A120-1FC1894A1A57
To operate the trip computer, use the
*
A
switch.
When the ignition switch is in the ON position,
modes of the trip computer can be selected by
pushing the
switch
*
A
briefly.
Each time the
switch
*
A
is pushed, the
display will change as follows:
Fuel Economy ? Average speed ? Driving
distance ? Elapsed time ? Range (distance to
empty) (dte) ? Settings
. When the
switch
*
A
is pushed and
held for less than 3 seconds, the selected
item can be reset except for “Range”,
Instruments and controls 2-21