Owner's Manual

The image files in the USB memory will be
displayed.
1. Press <SETTING>.
2. Select [Others] and press <ENTER>.
3. Select [Image Viewer] and press
<ENTER>.
The image of the selected file is displayed on the
right side of the screen.
When a number of folders are included in the
USB memory, select a folder from the list and
push <ENTER> to display the file list.
FULL SCREEN DISPLAY
The full screen display will appear when select-
ing [Full Screen Display] and press <ENTER>.
To operate the Image Viewer or to change the
settings, select the desired key.
.
(Start)
Select “
” and push <ENTER> to start
playing the slideshow.
.
(Stop)
Select “
” and push <ENTER> to stop
the slideshow.
.
(Next)
Select “
” and push <ENTER> to
display the next file.
.
(Previous)
Select “
” and push <ENTER> to
display the previous file.
SETTING THE IMAGE VIEWER
The Image Viewer setting display will appear
when selecting [Settings] on the full screen
display and pushing <ENTER>. The following
settings are available for the full screen display.
. Slideshow Speed
Choose [Slideshow Speed] and push
<ENTER>. From the following display,
select the changing time from 5, 10, 30,
60 seconds or “No Auto Change”.
. Slideshow Order
Choose [Slideshow Order] and push
<ENTER>. From the following display,
select “Random” or “Order List”.
Operating tips
. Only files that meet the following conditions
will be displayed.
— File format: JPEG (“.jpg” or “.jpeg”)
— File size: 2 MB or less
— Display size: 1,536 6 2,048 pixels or
less
. If an electronic device (such as a digital
camera) is directly connected to the vehicle
using a USB cable, no image will be
displayed on the screen.
. If the file name is too long, some file names
may not be entirely displayed.
Other settings 7-11
IMAGE VIEWER