Owner's Manual

BASIC OPERATIONS
Symptom Possible cause Possible solution
No image is displayed. The brightness is at the lowest setting. Adjust the brightness of the display.
The system in the video mode. Push <DISC·AUX> on the control panel to change the
mode.
“3. Audio system”
The display is turned off. Push < OFF> to turn on the display.
No voice guidance is available.
or
The volume is too high or too low.
The volume is not set correctly, or it is turned off. Adjust the volume of voice guidance.
Voice guidance is not provided for certain streets (roads
displayed in gray).
This is not a malfunction.
No map is displayed on the screen. A screen other than map screen is displayed. Push <MAP>.
The screen is too dim. The movement is slow. The temperature in the interior of the vehicle is low. Wait until the interior of the vehicle has warmed up.
Some pixels in the display are darker or brighter than
others.
This condition is an inherent characteristic of liquid
crystal displays.
This is not a malfunction.
Some menu items cannot be selected. Some menu items become unavailable while the vehicle
is driven.
Park the vehicle in a safe location, and then operate the
navigation system.
Troubleshooting guide 12-3
NAVIGATION