Owner's Manual

12-12 Troubleshooting guide

Symptom Possible cause Possible solution

The system does not accept

the voice command.

The system accepts the voice

command incorrectly.

The interior of the vehicle is too noisy. Close the windows or have other occupants be quiet.

The volume of the voice is too low. Speak louder.

The volume of the voice is too loud. Speak softer.

Pronunciation is unclear. Speak clearly.

The voice command is given before the voice recognition

system is ready.

Push <

> on the steering wheel, and speak a command after the tone

sounds.

8 seconds or more have passed after pushing <

> on the

steering wheel.

Make sure to speak a command within 8 seconds after the beep tone

sounds.

Only a limited range of voice commands is usable for each

screen.

Use a correct voice command appropriate for the current screen.

INFO:

For the best recognition, speak appropriate commands. Command lists are available earlier in this manual.

Standard Mode:

“Command List” (page 8-6)

Alternate Command Mode:

“Command List” (page 8-19)

VOICE RECOGNITION