® 2014 Q U E ST OWNER’S MANUAL For your safety, read carefully and keep in this vehicle.
WHEN READING THE MANUAL This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design at any time without notice. CAUTION This is used to indicate the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle.
above call attention to an item in the illustration. CALIFORNIA PROPOSITION 65 WARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
NISSAN CUSTOMER CARE PROGRAM NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs. We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
Table of Contents Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls 2 Pre-driving checks and adjustments 3 Monitor, heater, air conditioner, audio, phone and voice recognition systems 4 Starting and driving 5 In case of emergency 6 Appearance and care 7 Maintenance and do-it-yourself 8 Technical and consumer information 9 Index 10
0 Illustrated table of contents Seats, seat belts and supplemental restraint system (SRS) ............................................................................. Exterior front ............................................................................... Exterior rear ................................................................................ Passenger compartment ......................................................... Cockpit ..................................................................
SEATS, SEAT BELTS AND SUPPLEMENTAL RESTRAINT SYSTEM (SRS) 10. 11. 12. 13. 14. SSI0820 1. 2. 3. 4. 5. 0-2 Non-adjustable head restraints/headrests (Page 1-10) Child restraint anchor points (for top tether strap child restraint) (P.1-31) Seat belt for 3rd row center seat belt (P.1-20) Seat belts (P.1-15) Roof-mounted curtain side-impact supplemental Illustrated table of contents 6. 7. 8. 9. air bags (P.1-46) Adjustable head restraints (P.1-10) — Front-seat Active Head Restraints (P.
EXTERIOR FRONT 9. 10. 11. 12. 13. 14. 15. 16. *: Recovery hook (P.6-16) License plate installation (P.9-11) Fog lights* — Switch operation (P.2-38) — Bulb replacement (P.8-27) Headlight and turn signal lights — Switch operation (P.2-33) — Bulb replacement (P.8-27) Tires — Wheel and tires (P. 8-30, P.9-7) — Flat tire (P.6-3) — Tire Pressure Monitoring System (TPMS) (P.2-14, P.5-3) Doors — Keys (P.3-3) — Door locks (P.3-5) — Intelligent Key system (P.3-13) — Security system (P.
EXTERIOR REAR 8. *: SSI0822 1. 2. 3. 0-4 Antenna (P.4-101) — Satellite radio antenna* (P.4-102) Rear window wiper and washer — Switch operation (P.2-31) — Window washer fluid (P.8-13) High-mounted stop light — Bulb replacement (P.8-27) Illustrated table of contents 4. 5. 6. 7. Rear window defroster (P.2-32) Fuel-filler door — Operation (P.3-30) — Fuel recommendation (P.9-3) Rear combination light — Bulb replacement (P.8-27) RearView camera* — RearView monitor (P.4-23) — Around View monitor (P.
PASSENGER COMPARTMENT 9. 10. 11. 12. 13. 14. 15. *: Sunglasses holder (P.2-45) or communication mirror (P.3-36) Sun visors (P.3-33) Inside rearview mirror (P.3-33) — HomeLink® universal transceiver* (P.2-59) — Compass* (P.2-8) Cargo area — Cargo floor box (P.2-47) — Luggage hooks (P.2-48) — Cargo light (P.2-58) — Spare tire (P.6-5) — Power outlet (P.2-41) Hooks (P.2-48) Console box (P.2-46) — Power outlet* (P.2-41) — Auxiliary input jacks* (P.4-98) — iPod® connector* (P.4-77, P.
COCKPIT 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. *: SSI0825 1. 2. 3. 4. 5. 0-6 Vehicle Dynamic Control (VDC) OFF switch (P.2-40) Blind Spot Warning (BSW) switch* (P.2-40) — Blind Spot Warning (BSW)* (P.5-17) Sliding door switch* (driver’s side) (P.3-9) Sliding door switch* (passenger’s side) (P.3-9) Instrument brightness control switch (P.2-37) Illustrated table of contents 6. 7. 8. Power lift gate switch* (P.3-26) Headlight, fog light and turn signal switch — Headlight (P.2-33) — Turn signal (P.
INSTRUMENT PANEL 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. *: **: Rear window and outside mirror* defroster switch (P.2-32) Center ventilator (P.4-38) Heater/air conditioner control (P.4-39) or audio system (P.4-53) Parking brake (P.5-17) Tilting telescopic steering wheel lever (P.3-32) Front passenger air bag status light (P.1-53) Heated seat switch* (P.2-38) Cup holders (P.2-43) Power outlet (P.2-41) Instrument lower box (P.2-46) or CD/DVD slot (P.4-103) Power outlet main switch* (P.
METERS AND GAUGES JVC0210X 1. 2. 3. 4. 5. 6. 7. 0-8 Instrument brightness control switch (P.2-37) Tachometer (P.2-7) Speedometer (P.2-6) Fuel gauge (P.2-8) Warning/indicator lights (P.2-11) Trip computer switch (P.2-23) Dot matrix liquid crystal display (P.2-18) Illustrated table of contents 8. 9. 10. — Trip computer (P.2-23) Engine coolant temperature gauge (P.2-7) Odometer/twin trip odometer (P.2-6)/Continuously Variable Transmission (CVT) position indicator (P.
ENGINE COMPARTMENT SDI2715 VQ35DE ENGINE 1. 2. 3. 4. 5. 6. Power steering fluid reservoir (P.8-11) Drive belt location (P.8-15) Engine oil filler cap (P.8-8) Brake fluid reservoir (P.8-12) Air cleaner (P.8-17) Fuse/fusible link holder (P.8-21) 7. 8. 9. 10. 11. Window washer fluid reservoir (P.8-13) Engine coolant reservoir (P.8-7) Radiator filler cap (P.8-7) Engine oil dipstick (P.8-8) Battery (P.
WARNING AND INDICATOR LIGHTS Warning light Name Indicator light Page Anti-lock Braking System (ABS) warning light 2-12 Blind Spot Warning (BSW) system warning light* 2-12 Name Page Continuously Variable Transmission (CVT) position indicator light 2-16 Cruise indicator light 2-16 Exterior light indicator 2-16 Front passenger air bag status light 2-16 High beam indicator light 2-16 Malfunction Indicator Light (MIL) 2-17 Overdrive off indicator light 2-17 Security indicator light 2-17
1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................................................................ 1-2 Front seats ............................................................................ 1-3 2nd row seats ...................................................................... 1-6 3rd row seats ....................................................................... 1-7 Armrests .................................................................
SEATS SSS0133 well back in the seat with both feet on the floor and adjust the seat belt properly. See “Precautions on seat belt usage” (P.1-15). WARNING . . 1-2 Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.
SSS0792 FRONT SEATS Front manual seat adjustment Forward and backward: 1 up and hold it while you slide Pull the lever * the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining: 2 up and To recline the seatback, pull the lever * lean back. To bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seatback in position.
seat position memory function (if so equipped). CAUTION When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damages. SSS1051 Forward and backward: 1 forward or backward will Moving the switch * slide the seat forward or backward to the desired position. Reclining: 2 backward until the Move the recline switch * desired angle is obtained. To bring the seatback 2 forward.
SSS1052 Seat lifter (if so equipped): 1. Pull up or push down the adjusting switch to adjust the seat height until the desired position is achieved. 2. Tilt up or down the adjusting switch to adjust the front angle of the seat until the desired position is achieved (for driver’s seat). SSS1053 Lumbar support (if so equipped): The lumbar support feature provides lower back support to the occupants. Push the front or back end of the switch to adjust the seatback lumbar area.
SSS1158 2ND ROW SEATS Seat adjustment WARNING . The 2nd row seats are heavy. Be careful when folding and unfolding. . To avoid injury to yourself and others, keep hands and body clear when folding. Forward and backward: 1 up and hold it while you slide Pull the lever * the seat forward or backward to the desired 1-6 SSS1159 position. Release the lever to lock the seat in position. Entry to the 3rd row seat Reclining: 2 up and To recline the seatback, pull the lever * lean back.
WARNING . After adjustment, check to be sure the seat is securely locked. . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. SSS1149 3RD ROW SEATS Reclining A Pull the strap on the seatback * and lean back. Release the strap at the desired angle.
FLEXIBLE SEATING . If the head restraints are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. . When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. . Properly secure all cargo to help prevent it from sliding or shifting.
CAUTION When folding the 2nd row seat for maximum cargo hauling, be sure that cargo does not contact the center console of the 2nd row seat to avoid possible damage to the console. Folding the 3rd row seats SSS1163 Folding the 2nd row seats Before folding the rear seats: Secure the seat belts on the seat belt hooks on the side wall. (See “Seat belt hooks” (P.1-23).) To fold down the seatbacks: Pull the lever on the 2nd row seat. Before folding the 3rd row seats: .
HEAD RESTRAINTS/HEADRESTS Manual folding: A or on the Pull the strap on the seatback * B back side of the seatback * and fold the seatback. WARNING SSS1151 Power folding (if so equipped): A located on Push the front side of the switch * the right side or left side of the cargo area. The corresponding 3rd row seatback will be folded down automatically. B . Push and hold the rear side of the switch * The 3rd row seatback will be returned automatically.
. . . JVR0269X The illustration shows the seating positions equipped with head restraint/headrest. The non-adjustable head restraints/headrests have single locking notch to secure them to the seat frame. Proper Adjustment: — For the adjustable type, align the head restraint/headrest so the center of your ear is approximately level with the center of the head restraint/headrest.
JVR0203X NON-ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest SSS1037 REMOVE INSTALL Use the following procedure to remove the head restraint/headrest. 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the adjustment 1 must be installed in the hole with notch * 2 . the lock knob * 3. Lock knob 1.
SSS0997 ADJUST For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position. SSS1035 JVR0259X For non-adjustable head restraint/headrest Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.
Adjust the Active Head Restraints properly as described earlier in this section. SSS1036 Lower To lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position. SSS0508 FRONT-SEAT ACTIVE HEAD RESTRAINT The Active Head Restraint moves forward utilizing the force that the seatback receives from the occupant in a rear-end collision.
SEAT BELTS PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes a supplemental air bag. Most U.S.
WARNING . . . . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly restrained in the rear seat and, if appropriate, in a child restraint. The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. Serious injury or death can occur if the seat belt is not worn properly.
PREGNANT WOMEN commendations. The child restraints should be replaced if they are damaged. NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific recommendations.
1 tongue * may also be released. Release the connector tongue by inserting a suitable tool (such as a key) A . If the into the connector buckle * seat belt cannot be unbuckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt. internal injuries. . For the most effective protection when the vehicle is in motion, the seat should be upright.
belt when the vehicle slows down rapidly or during impacts. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation. When the ALR mode is activated the seat belt cannot be extended again until the seat belt tongue is detached from the buckle and fully retracted. The seat belt returns to the ELR mode after the seat belt fully retracts. For additional information, see “Child restraints” (P.1-26). SSS0292 Fastening the seat belts 1.
restrict further belt movement. If the retractor does not lock during this check or if you have any question about seat belt operation, see a NISSAN dealer. SSS0326 SSS0391 Unfastening the seat belts 3rd row center seat belt To unfasten the seat belt, push the button on the buckle. The seat belt automatically retracts. The 3rd row center seat belt has a connector 1 and a seat belt tongue * 2 .
Stowing 3rd row center seat belt: When folding down the 3rd row seat, the 3rd row center seat belt can be retracted into a stowed position as follows: 1 so that the 1. Hold the connector tongue * seat belt does not retract suddenly when the tongue is released from the connector buckle. Release the connector tongue by A into inserting a suitable tool such as key * the connector buckle. 2. Insert the seat belt tongue into the retractor 2 . base first * SSS0241 3.
Attaching 3rd row center seat belt: Always be sure the 3rd row center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the 3rd row seat. To connect the buckle: 1. Pull out the connector tongue from the 1 . retractor base * 2. Pull out the seat belt tongue from the 2 . retractor base * 3. Pull the seat belt and secure the connector 3 . buckle until it clicks * The center seat belt connector tongue and buckle are indicated by the ! and ~ mark.
WARNING SSS0351A Shoulder belt height adjustment (if so equipped) The shoulder belt anchor height should be adjusted to the position best for you. (See “Precautions on seat belt usage” (P.1-15).) 1 , and To adjust, pull the adjustment button * then move the shoulder belt anchor to the 2 , so that the belt passes desired position * over the center of the shoulder. The belt should be away from your face and neck, but not falling off of your shoulder.
CHILD SAFETY purchasing an extender if an extender is required. WARNING . Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with the NISSAN seat belts. . Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. . . .
tongue may also be released. Release 1 by inserting a the connector tongue * suitable tool (such as a key) into the A . If the seat belt connector buckle * cannot be unbuckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt. Children need adults to help protect them. They need to be properly restrained.
CHILD RESTRAINTS placed in child restraints that comply with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. You should choose a child restraint that fits your vehicle and always follow the manufacturer’s instructions for installation and use. LARGER CHILDREN Children should remain in a forward-facing child restraint with a harness until they reach the maximum height or weight limit allowed by the child restraint manufacturer.
PRECAUTIONS ON CHILD RESTRAINTS WARNING . Failure to follow the warnings and instructions for proper use and installation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions for installation and use. — Infants and children should never be held on anyone’s lap.
For details, see “Lower Anchors and Tethers for CHildren System (LATCH)” (P.1-28). anchor point on the vehicle. If you do not have a LATCH compatible child restraint, the vehicle seat belts can be used. Several manufacturers offer child restraints for infants and small children of various sizes. When selecting any child restraint, keep the following points in mind: .
. 3rd row seat LATCH lower anchor WARNING Failure to follow the warnings and instructions for proper use and installation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: . Attach LATCH system compatible child restraints only at the locations shown in the illustration. . Do not secure a child restraint in the center rear seating position using the LATCH lower anchors. The child restraint will not be secured properly. .
SSS1167 2nd row seats SSS0643 LATCH webbing-mounted attachment Installing child restraint LATCH lower anchor attachments LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure the child restraint. Check your child restraint for a label stating that it is compatible with LATCH.
TOP TETHER STRAP CHILD RESTRAINT killed in a collision. . If the manufacturer of your child restraint requires the use of a top tether strap, it must be secured to an anchor point. WARNING . SSS1088 2nd row seat . SSS1168 3rd row seat In the 3rd row seat, a child restraint with a top tether strap can only be used in the center and right outboard seating position.
REAR-FACING CHILD RESTRAINT INSTALLATION USING LATCH Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. Follow these steps to install a rear-facing child restraint in the 2nd row seats and 3rd row seat using the LATCH system: 1. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions. SSS0648 Rear-facing web-mounted — step 2 2.
5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. SSS0639 SSS0650 Rear-facing — step 3 Rear-facing — step 4 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments.
. When installing a child restraint system in the 3rd row center position, both the center seat belt connector tongue and buckle tongue must be secured. See “3rd row center seat belt” (P.1-20). SSS0100 REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING . The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured.
SSS0654 SSS0655 SSS0656 Rear-facing — step 2 Rear-facing — step 3 Rear-facing — step 4 2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing. 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode).
seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING LATCH Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. SSS0657 SSS0658 Rear-facing — step 5 Rear-facing — step 6 5.
SSS0645 SSS0646 SSS0647 Forward-facing web-mounted — step 2 Forward-facing rigid-mounted — step 3 Forward-facing — step 4 2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors. 3. The back of the child restraint should be secured against the vehicle seatback. 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments.
child restraint is loose, repeat steps 1 through 6. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELT WARNING . SSS0638 Forward-facing — step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place.
2. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions. The back of the child restraint should be secured against the vehicle seatback. If necessary, adjust or remove the head restraint or headrest to obtain the correct child restraint fit. If the head restraint or headrest is removed, store it in a secure place. Be sure to reinstall the head restraint or headrest when the child restraint is removed. See “Head restraints/headrests” (P.
SSS0652 SSS0653 SSS0641 Forward-facing — step 5 Forward-facing — step 6 Forward-facing — step 8 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 8. After attaching the child restraint, test it before you place the child in it.
seat belt is not locked, repeat steps 2 through 8. SSS0676 SSS1088 Forward-facing — step 10 2nd row seat 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated, see “Front passenger air bag and status light” in this section. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer.
. using the damaged anchorage, and a child could be seriously injured or killed in a collision. First, secure the child restraint with the LATCH lower anchors or the seat belt, as applicable. 1. If necessary, raise or remove the head restraint to position the top tether strap over the top of the seatback. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. See “Head restraints/headrests” (P.
If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. BOOSTER SEATS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: . Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach. .
when using a booster seat with the seat belts. Refer to all Warnings and Cautions in the “Child safety”, “Child restraints” and “Booster seats” sections earlier in this section before installing a child restraint. Follow these steps to install a booster seat in the rear seat or in the front passenger seat: LRS0464 All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated.
is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjusting the seat belt routing. LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint or headrest to obtain the correct booster seat fit.
SUPPLEMENTAL RESTRAINT SYSTEM PRECAUTIONS ON SUPPLEMENTAL RESTRAINT SYSTEM This Supplemental Restraint System (SRS) section contains important information concerning the following systems. . Driver and passenger supplemental frontimpact air bag (NISSAN Advanced Air Bag System) . Front seat-mounted side-impact supplemental air bag . Roof-mounted curtain side-impact supplemental air bag .
WARNING . The supplemental front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. . The front passenger air bag will not inflate if the passenger air bag status light is lit or if the front passenger seat is unoccupied. See “Front passenger air bag and status light” (P.1-53). .
back against the seatback and as far-away as practical from the steering wheel or instrument panel. Always use the seat belts. . air bag inflates. The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt usage then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. .
WARNING SSS0008 SSS0009 . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. . Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly restrained in the rear seat, if possible. .
SSS0832 SSS0140 SSS0159 WARNING Front seat-mounted side-impact supplemental air bags and roof-mounted curtain side-impact supplemental air bags: . SSS0833 1-50 Safety — Seats, seat belts and supplemental restraint system SSS0162 The side-impact and certain supplemental air bags ordinarily will not inflate in the event of a front impact, rear impact, rollover, or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
. The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bags and curtain air bags inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bags on the side of the seatback of the front seat or near the side roof rails. Do not allow anyone sitting in the front seats or rear outboard seats to extend their hand out of the window or lean against the door.
NISSAN ADVANCED AIR BAG SYSTEM (front seats) seat, do not position the front passenger seat so the child restraint contacts the instrument panel. If the child restraint does contact the instrument panel, the system may determine the seat is occupied and the passenger air bag may deploy in a collision. Also the front passenger air bag status light may not illuminate. See “Child restraints” (P.1-26) for information about installing and using child restraints.
whether the front occupants are belted or unbelted. Additionally, the front passenger air bag may be automatically turned OFF under some conditions, depending on the information provided by the occupant classification sensors. If the front passenger air bag is OFF, the passenger air bag status light will be illuminated (if the seat is unoccupied, the light will not be illuminated, but the air bag will be off). (See “Front passenger air bag and status light” (P.153) for further details.
an accident. Status light: The front passenger air bag status light is located on the instrument panel. After the ignition switch is placed in the ON position, the front passenger air bag status light illuminates for about 7 seconds and then turns off or illuminates depending on the front passenger seat occupied status. The light operates as follows: The light operates as follows: . . . Unoccupied passenger seat: The light is OFF and the front passenger air bag is OFF and will not inflate in a crash.
occupants are seated and restrained properly. Using the passenger air bag status light, you can monitor when the front passenger air bag is automatically turned OFF with the seat occupied. The light will not illuminate when the front passenger seat is unoccupied. If an adult occupant is in the seat but the passenger air bag status light is illuminated (indicating that the air bag is OFF), it could be that the person is a small adult, or is not sitting on the seat properly.
Additionally, do not stow any objects under the front passenger seat or the seat cushion and seatback. Such objects may interfere with the proper operation of the occupant classification sensors. system. . . Do not make unauthorized changes to your vehicle’s electrical system, suspension system or front end structure. This could affect proper operation of the front air bag system. Tampering with the air bag system may result in serious personal injury.
to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions on the side where the vehicle is impacted. Vehicle damage (or lack of it) is not always an indication of proper side air bag and curtain air bag operation. SSS1092 FRONT SEAT-MOUNTED SIDE-IMPACT SUPPLEMENTAL AIR BAG AND ROOF-MOUNTED CURTAIN SIDE-IMPACT SUPPLEMENTAL AIR BAG SYSTEMS The side air bags are located in the outside of the seatback of the front seats.
. Right after inflation, several side air bags and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. . No unauthorized changes should be made to any components or wiring of side air bag and curtain air bags. This is to prevent damage to or accidental inflation of the side air bag and curtain air bag systems. . . . Do not make unauthorized changes to your vehicle’s electrical system, suspension system or side panel.
becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased with the seat belt retractor and buckle anchor. These seat belts are used the same way as conventional seat belts. When a pretensioner activates, smoke is released and a loud noise may be heard. The smoke is not harmful, and it does not indicate a fire. Care should be taken not to inhale it as it may cause irritation and choking.
. The supplemental air bag warning light remains on approximately 7 seconds after the ignition switch is pushed to the ON position. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not come on at all. Under these conditions, the air bag and/or pretensioner systems may not operate properly. They must be checked and repaired. Take your vehicle to the nearest NISSAN dealer.
MEMO Safety — Seats, seat belts and supplemental restraint system 1-61
MEMO 1-62 Safety — Seats, seat belts and supplemental restraint system
2 Instruments and controls Cockpit ........................................................................................ 2-3 Instrument panel ........................................................................ 2-4 Meters and gauges ................................................................... 2-5 Meter/ring illumination and needle sweep .................... 2-5 Speedometer and odometer ............................................ 2-6 Tachometer .................................................
Front moonroof ................................................................. Rear moonroof .................................................................. If the front or rear moonroof does not operate ........ Interior lights .......................................................................... Map lights ........................................................................... Rear personal lights ......................................................... Interior light control switch .......
COCKPIT 11. 12. 13. 14. 15. 16. 17. 18. *: Fuse box cover Fuel-filler door opener handle Hood release handle Headlight aiming control* Power door main switch* Steering-wheel-mounted controls (left side) — Audio control steering switch* — Hands-Free Phone System switch* Horn Steering-wheel-mounted controls (right side) — Cruise control system if so equipped SSI0825 1. 2. 3. 4. 5. 6.
INSTRUMENT PANEL 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. *: **: SSI0824 1. 2. 3. 4. 5. 6. 2-4 Side ventilator Meters and gauges Push-button ignition switch Hazard warning flasher switch Shift lever Center display — Center color display* Instruments and controls 7. 8.
METERS AND GAUGES The needle indicators may move slightly after the ignition switch is pushed to the OFF position. This is not a malfunction. CAUTION . For cleaning, use a soft cloth, dampened with water. Never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or cause discoloration to the lens. . Do not spray any liquid such as water on the meter lens. Spraying liquid may cause the system to malfunction.
Resetting the trip odometer: 3 for more Pushing the TRIP RESET switch * than 1 second resets the trip odometer to zero. JVI0252X Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). SIC4632 Odometer/twin trip odometer Odometer/twin trip odometer 1 and twin trip odometer * 2 The odometer * are displayed when the ignition switch is in the ON position.
normal range, reduce vehicle speed to decrease temperature. If gauge is over the normal range, stop the vehicle as soon as safely possible and let the engine idle. If the engine is overheated, continued operation of the vehicle may seriously damage the engine. See “If your vehicle overheats” (P.6-12) for immediate action required. JVI0253X TACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM). Do not rev the 1 .
COMPASS (if so equipped) “0”. There will be a small reserve of fuel in the tank when the fuel gauge needle reaches “0”. The indicates that the fuel-filler door is located on the driver’s side of the vehicle. CAUTION . JVI0357X FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. . If the vehicle runs out of fuel, the malfunction indicator light (MIL) may come on. Refuel as soon as possible.
on your everyday route. The compass will be calibrated once it has tracked 3 complete circles. To turn on and off the compass manually, push A while the ignition switch is in the switch * the ON position.
ZONE VARIATION CHANGE PROCEDURE The difference between magnetic north and geographical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Push the switch for more than 3 seconds. The current zone number will appear in the display. 2. Find your current location and variance number on the zone map. NOTE: Use zone number 5 for Hawaii. 3.
WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS Anti-lock Braking System (ABS) warning light Blind Spot Warning (BSW) system warning light* Brake warning light Charge warning light Engine oil pressure warning light Hydraulic pump electric power steering warning light Intelligent Key system warning light Exterior light indicator Low tire pressure warning light Front passenger air bag status light Master warning light High beam indicator light Seat belt warning light and chime Malfunction Indicator L
CHECKING BULBS WARNING LIGHTS With all doors closed, apply the parking brake and push the ignition switch to the ON position without starting the engine. The following lights will come on (if so equipped): , or , , , , The following lights come on briefly and then go off (if so equipped): , or , , , , , , If any light does not come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system checked by a NISSAN dealer.
“Anti-lock Braking System (ABS) warning light” (P.2-12).) WARNING . . . Your brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous.
Intelligent Key system warning light After the ignition switch is pushed to the ON position, this light comes on for about 2 seconds and then turns off. This light warns of a malfunction with the Intelligent Key system. If the light comes on while the engine is stopped, it may be impossible to start the engine. If the light comes on while the engine is running, you can drive the vehicle. However in these cases, contact a NISSAN dealer for repair as soon as possible.
ing after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. . . When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/ or system resetting.
Restraint Systems (air bag systems) and/or the pretensioners may not function properly. For additional information, see “Supplemental restraint system” (P.1-46). WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible.
Malfunction Indicator Light (MIL) If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable Transmission (CVT) malfunction. The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 US gallons (11.
DOT MATRIX LIQUID CRYSTAL DISPLAY Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on. Vehicle Dynamic Control (VDC) off indicator light The light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates that the vehicle dynamic control system and traction control system are not operating.
JVI0539X Instruments and controls 2-19
OPERATIONAL INDICATORS 3. SHIFT “P” warning 5. Key battery discharge indicator 1. Engine start operation indicator This warning appears when the ignition switch is pushed to stop the engine with the shift lever in any position except the P (Park) position. This indicator appears when the key battery is running out of power. This indicator appears when the shift lever is in the P (Park) position.
8. Low fuel warning 12. Check tire pressure warning This warning appears when the fuel level in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (0) position. This warning appears when the low tire pressure warning light in the meter illuminates and low tire pressure is detected. The warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated.
MAINTENANCE INDICATORS 1. Engine oil replacement indicator This indicator appears when the customer set time comes for changing the engine oil. You can set or reset the distance for changing the engine oil. (See “Trip computer” (P.2-23).) 2. Oil filter replacement indicator This indicator appears when the customer set time comes for replacing the oil filter. You can set or reset the distance for replacing the oil filter. (See “Trip computer” (P.2-23).) 3.
Elapsed time and trip odometer ? Distance to empty (dte) ? Outside air temperature (ICY) ? Setting ? Warning check SIC3580 TRIP COMPUTER Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the side of the switches as shown above. A * B * SIC4700 Current and average fuel consumption (MPG, l (liter)/100 km or km/l) The current and average fuel consumption mode shows the current and average fuel consumption.
B for longer done by pushing the switch * than 1 second. (The average fuel consumption is also reset at the same time.) The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows “——”. SIC3674 SIC4701 Average fuel consumption (MPG, l/100 km or km/l) and speed (MPH or km/h) Elapsed time and trip odometer (miles or km) Fuel consumption: The average fuel consumption mode shows the average fuel consumption since the last reset.
. SIC4702 pushed to the OFF position may continue to be displayed. When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display. SIC4703 Distance to empty (dte — miles or km) Outside air temperature (ICY — 8F or 8C) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption.
ALERT: Alert menu can be set to notify the following items. . TIMER Select this submenu to specify when the “TIMER” indicator activates. . ICY Select this submenu to display the low outside temperature warning. To return to the top page of the setting mode, select “BACK”. SIC3678 Setting Setting cannot be made while driving. A message “Setting can only be operated when stopped” is also displayed on the dot matrix crystal display.
SECURITY SYSTEMS Push the B to select other menus. switch * DETAIL: This item is available only when a warning is displayed. Select this menu to see the details of warnings. SIC3993 Warning check To see if there are any of the following warnings and corresponding details, select this menu. . . . . . . .
VEHICLE SECURITY SYSTEM about 30 seconds the vehicle security system automatically shifts into the armed phase. The security light begins to flash once every approximately 3 seconds. If, during this 30-second pre-arm time period, the door is unlocked, or the ignition switch is pushed to ACC or ON, the system will not arm. The vehicle security system provides visual and audio alarm signals if someone opens the doors or lift gate when the system is armed.
by releasing the door inside lock knob, the alarm will activate.) How to stop an activated alarm The alarm will stop by unlocking a door by pushing the unlock button on the Intelligent Key, the door handle request switch or using the mechanical key. The alarm will not stop if the ignition switch is pushed to the ACC or ON position. If the system does not operate as described above, have it checked by a NISSAN dealer.
WINDSHIELD WIPER AND WASHER SWITCH service as soon as possible. Please bring all Intelligent Keys that you have when visiting a NISSAN dealer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the windshield. CAUTION 2-30 Instruments and controls . Do not operate the washer continuously for more than 30 seconds. .
REAR WINDOW WIPER AND WASHER SWITCH 2 * 3 * 13). LO — continuous low speed operation HI — continuous high speed operation 4 (MIST) to have one sweep Push the lever up * operation of the wiper. 5 Pull the lever toward you * to operate the washer. Then the wiper will also operate several times. WARNING In freezing temperatures the washer solution may freeze on the rear window glass and obscure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION .
REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH window washer reservoir tank to mix the washer fluid concentrate and water. If the rear window wiper operation is interrupted by snow or ice, the wiper may stop moving to protect its motor. If this occurs, turn the wiper switch to the OFF position and remove the snow or ice that is on and around the wiper arms. In approximately 1 minute, turn the switch on again to operate the wiper.
HEADLIGHT AND TURN SIGNAL SWITCH XENON HEADLIGHTS (if so equipped) WARNING HIGH VOLTAGE . When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at a NISSAN dealer. . Xenon headlights provide considerably more light than conventional headlights. If they are not correctly aimed, they might temporarily blind an oncoming driver or the driver ahead of you and cause a serious accident.
headlights when it is light. The headlights will also be turned on automatically at twilight or in rainy weather (when the windshield wiper is operated continuously) (if so equipped). If the ignition switch is pushed to the OFF position and one of the doors is opened and this condition is continued, the headlights remain on for a specified period of time. SIC3669 Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically.
seconds. Battery saver system For automatic headlights off delay setting, see “Vehicle information and settings (models with center multi-function control panel)” (P.4-8). A chime will sound when the driver side door is opened with the light switch in the or position and the ignition switch in the ACC, OFF or LOCK position.
headlights turn off automatically. WARNING SIC2275 Headlight aiming control (if so equipped) Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle. The light axis can be lowered with the operation of the switch.
running lights will remain on until the ignition switch is pushed to the OFF position. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. SIC3585 Instrument brightness control The instrument brightness control operates when the ignition switch is in the ON position.
HORN HEATED SEATS (if so equipped) WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in those body parts in contact with the seat. Use of the seat heater by such people could result in serious injury. FOG LIGHT SWITCH (if so equipped) To turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. To turn them off, turn the switch to the OFF position.
The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. damage to the heater. . Any liquid spilled on the heated seat should be removed immediately with a dry cloth. . When cleaning the seat, never use gasoline, thinner, or any similar materials. . If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by a NISSAN dealer.
BLIND SPOT WARNING (BSW) SWITCH (if so equipped) VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH switch to turn off the system. The BSW ON 1 will turn off. indicator * NOTE: If you continue to push the warning systems switch from off to on for over 4 seconds, a chime will sound. This will change the default status of the BSW system to OFF so that this system will not automatically turn on when the engine is started. If this procedure is repeated, the default status will return to ON.
POWER OUTLET Type A CAUTION . To use the power outlet, pull the cover as illustrated. Use power outlet with the engine running to avoid discharging the vehicle battery. . Avoid using power outlet when the air conditioner, headlights or rear window defroster is on. . Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF. . When not in use, be sure to close the cap. Do not allow water or any liquid to contact the outlet.
SIC2648 Main switch The power outlet (plug type) is located on the front console. It can operate when the ignition switch in the ON position and the main switch (located on the instrument panel) is ON. After using the power outlet, be sure to turn off the main switch. 2-42 Instruments and controls . Use this power outlet with the engine running. (If the engine is stopped, this could result in a discharged battery.) . When using the outlet for a long period of time such as when idling etc.
STORAGE — Electrical appliances which have a switching power frequency (clocks etc.) — Electrical appliances that measure precise data (measuring equipment etc.) CUP HOLDERS CAUTION . Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. . Use only soft cups in the cup holder. Hard objects can injure you in an accident. — Certain other electrical appliances (electric blankets etc.) .
SIC4727 SIC4719 SIC4419 Front side of the front center console 2nd row seat SIC4654 Back side of the front center console 2-44 Instruments and controls 3rd row seat
. SIC4720 Soft bottle holder Soft bottle holders are located on the front doors and sliding doors. Do not leave glasses in the sunglasses holder while parking in direct sunlight. The heat may damage the glasses. SIC3589 SUNGLASSES HOLDER (if so equipped) WARNING CAUTION . . Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. Do not use bottle holder for open liquid containers.
SIC4647 GLOVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. To open the glove box, pull the handle 1 . * To close, push the lid in until the lock latches. 2 /unlock * 3 the glove box, use the To lock * mechanical key. For the mechanical key usage, see “Keys” (P.3-3). 2-46 Instruments and controls SIC4729 SIC4730 Front INSTRUMENT LOWER BOX (if so equipped) CONSOLE BOX To open the box, pull the knob.
SIC4721 2nd row center console 2nd row center console A to open the console box lid. Pull up on lever * To remove the 2nd row center console box: B on rear of console and 1. Pull up on handle * tilt the console up. 2. Move the console box toward the rear of the vehicle and lift out. To reinstall the 2nd row center console box: 1. Tilt the console box forward and install the front of the console box so that the hook engages the slot in the base. 2.
CAUTION Do not apply a total load of more than 7 lb (3 kg) to the hook. SIC4732 SIC4733 Cargo area Seatbacks HOOKS Seatbacks Cargo area The hooks are located on the front and 3rd row seatbacks. The 4 hooks are located on the right and left side of the cargo area. WARNING . . Always make sure that the cargo is properly secured. Use the suitable ropes and hooks. Unsecured cargo can become dangerous in an accident or sudden stop.
(P.9-12). WARNING . Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. . Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or unusual handling maneuvers. . Roof rack load should be evenly distributed. . Do not exceed maximum roof rack load weight capacity. .
SUNSHADE (if so equipped) To store the sunshade, remove the sunshade from the hooks and lower it. The sliding door may be opened or closed with the sunshades in either the raised or lowered position. SIC4659 SIC3505 COAT HOOKS CAUTION The coat hooks are equipped beside the rear personal lights. . Do not pull the sunshade in any direction other than up. This may damage the sunshade. . Do not operate the sunshade when the sliding door is opening or closing. This may damage the sunshade.
WINDOWS POWER WINDOWS Locking passengers’ windows C is pushed in, only the When the lock button * driver side window can be opened or closed. Push it in again to cancel. WARNING . Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. . Do not leave children unattended inside the vehicle.
Auto reverse function WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window. SIC3241 SIC3285 Passenger side power window switch Automatic operation The passenger side switch will open or close only the corresponding window. To open or close the window, push down or pull up the switch and hold it.
MOONROOF (if so equipped) If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. WARNING . In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. .
Tilting To tilt up, first close the moonroof. B side of the switch. The moonroof Push the * will automatically tilt up all the way. A side of the switch. To tilt down, push the * The roof will stop when the switch is released. SIC4643 SIC4644 FRONT MOONROOF REAR MOONROOF Opening and closing sunshade Rear moonroof operation switches are located on the front map light and rear ceiling. The sunshade will open automatically when the front moonroof is opened. However, it must be closed manually.
Tilting the moonroof is closed by automatic operation when the ignition switch is in the ON position or for about 45 seconds after the ignition switch is pushed to the OFF position. 3. Release the moonroof switch, then continue B side again. The moonroof to push on the * will operate in the close direction. (The moonroof operates inch by inch.) 4. After the moonroof stops moving, release the moonroof switch and within 4 seconds, B push side * again. The moonroof will automatically open once.
INTERIOR LIGHTS . . The driver’s door is unlocked. The last open door excluding the lift gate is closed. The interior light timer will be cancelled when: . . The driver’s door is locked. The ignition switch is pushed to the ON position. When the rear personal light switch is in the ON C , the rear personal lights illuminate, position * regardless of any condition. SIC2881 SIC4745 MAP LIGHTS REAR PERSONAL LIGHTS Push the button as illustrated to turn the light on or off.
— remain on for about 15 seconds. doors are unlocked by pushing the UNLOCK button on the Intelligent Key or door handle request switch with the ignition switch in the LOCK position — remain on for about 15 seconds. . any door is opened and then closed with the ignition switch in the LOCK position — remain on for about 15 seconds. . any door is opened with the ignition switch in the ACC or ON position — remain on while the door is opened. When the door is closed, the lights go off.
MOOD LIGHTS VANITY MIRROR LIGHTS SIC4747 Map lights CARGO LIGHTS A located in the following The mood lights * positions will illuminate whenever the headlight switch is in the or position. The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. . . . The lights will turn off after a period of time when the lights remain illuminated to prevent the battery from becoming discharged.
HomeLink® UNIVERSAL TRANSCEIVER (if so equipped) The HomeLink® Universal Transceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. reverse features as required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982).
4. At the receiver located on the garage door opener motor in the garage, locate the “learn” or “smart” button (the name and color of the button may vary by manufacturer but it is usually located near where the hanging antenna wire is attached to the unit). If there is difficulty locating the button, reference the garage door opener’s manual. 5. Press and release the “learn” or “smart” button. JVI0428X 2.
PROGRAMMING HomeLink® FOR CANADIAN CUSTOMERS AND GATE OPENERS Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink® to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner.
CLEARING THE PROGRAMMED INFORMATION The following procedure clears the programmed information from both buttons. Individual buttons cannot be cleared. However, individual buttons can be reprogrammed, see “Reprogramming a single HomeLink® button” (P.2-62). To clear all programming 1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash in approximately 10 seconds. Do not hold for longer than 20 seconds. 2. Release both buttons.
MEMO Instruments and controls 2-63
MEMO 2-64 Instruments and controls
3 Pre-driving checks and adjustments Keys .............................................................................................. 3-3 Intelligent Key system ......................................................... 3-3 Mechanical key .................................................................... 3-4 Valet hand-off ....................................................................... 3-5 Doors ............................................................................................
Automatic drive positioner (if so equipped) .................... 3-37 Entry/exit function ............................................................. 3-37 Memory storage .............................................................. 3-37 System operation ...........................................................
KEYS A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate. A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by a NISSAN dealer.
nents when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer. — Do not change or modify the Intelligent Key. — Do not use a magnet key holder. — Do not place the Intelligent Key near an electric appliance such as a television set, personal computer or cellular phone. CAUTION . Be sure to carry the Intelligent Key with you when driving. The Intelligent Key is a precision device with a built-in transmitter. To avoid damaging it, please note the following.
DOORS CAUTION WARNING . To prevent the glove box from being opened during valet hand-off, follow the procedures below. Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders. . 1. Remove the mechanical key from the Intelligent Key.
the key is turned once. (See “How to use SETTING button” (P.4-13).) OPENING AND CLOSING WINDOWS WITH THE MECHANICAL KEY (if so equipped) The driver’s door key operation also allows you to open and close the window that is equipped with the automatic open/close function. (See “Power windows” (P.2-51).) To open the windows, turn the driver’s door key cylinder to the front of the vehicle for longer than 1 second. The door is unlocked and the window keeps opening while turning the key.
switch to the unlock position 2 . * Lockout protection When the power door lock switch (driver or front passenger) is moved to the lock position with any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle and any door open, all doors will unlock automatically and a chime will sound after the door is closed. These functions help to prevent the Intelligent Key from being accidentally locked inside the vehicle. AUTOMATIC DOOR LOCKS .
SPA2387 SPA2104 SPA2701 Opening/Closing the sliding door The sliding door will be latched at the fully opened/closed position. To open/close the sliding door manually, pull the door handle or the inside door handle. 3-8 Pre-driving checks and adjustments CAUTION Do not put your hands or feet on the A B . This harness * or the bracket * may cause damage to the vehicle or personal injury. CAUTION Before closing the sliding door, make sure that no objects are placed on the A door step.
POWER SLIDING DOOR (if so equipped) The power sliding door system will allow you to open or close the sliding doors automatically using the door handles, the sliding door switch, the Intelligent Key or sliding door one-touch switch. SLIDING DOOR AUTO CLOSURE FUNCTION (if so equipped) The auto closure function will operate when the sliding door is not fully closed. WARNING When the auto closure function is operating, keep hands and feet away from the sliding door to prevent injuries.
. JVP0184X WARNING . There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, feet etc., inside the vehicle before closing the door. . Do not put your hands or feet on the A or the sliding door vehicle body * B while operating the sliding door. * . Operate the sliding door only when the vehicle is completely stopped.
The power sliding door system can be operated when all of following conditions are satisfied. . . . . The vehicle is stopped. Battery voltage is normal. The sliding door is unlocked. The fuel-filler door is closed (for driver’s side only). When the ignition switch is in the "ON" position, the system can be operated in the above and following conditions. SPA2071 1 of Be careful not to damage the sensor * the sliding door.
. . . SPA2846 A * B * JVP0157X Instrument panel Driver’s side sliding door switch Passenger’s side sliding door switch Door pillar OPERATING SLIDING DOOR SWITCH To operate the sliding doors with the sliding door switches, turn on the power door main switch. . . 3-12 Pre-driving checks and adjustments When the sliding door is fully closed, push the sliding door switch on the door pillar or push and hold the sliding door switch on the instrument panel for about 1 second.
INTELLIGENT KEY SYSTEM push the LOCK button on the Intelligent Key after the door is closed. See “Remote keyless entry system” (P.3-21). OPERATING SLIDING DOOR BY POWER ASSIST . To operate, pull the inside or outside door handle until you hear the buzzer, the door will automatically open or close. If the door handle is operated while the sliding door is moving, the door will reverse directions and stop at either the full open or closed position.
computer. When the vehicle is parked near a parking meter. In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. water or salt water. This could affect the system function. . . Do not drop the Intelligent Key. . Do not strike the Intelligent Key sharply against another object. . Do not change or modify the Intelligent Key. .
SPA2074 INTELLIGENT KEY OPERATING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified 1 . operating range from the request switch * When the Intelligent Key battery is discharged or strong radio signals are present near the operating location, the Intelligent Key system’s operating range becomes narrower, and the Intelligent Key may not function properly. The operating range is within 31.50 in (80 cm) 1 .
. . Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. Models with center multi-function control panel: The Intelligent Key system (opening/closing doors with the door handle request switch) can be set to remain inactive. (See “Vehicle information and settings (models with center multi-function control panel)” (P.4-8).
can lock or unlock all doors by pushing the door A handle request switch * or the lift gate B within the range of operarequest switch * tion. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” (P.3-23). CAUTION Locking doors 1.
Unlocking doors A or 1. Push the door handle request switch * B once while the lift gate request switch * carrying the Intelligent Key with you. 2. The hazard indicator flashes once and the outside chime sounds once. The corresponding door or the lift gate will unlock. 3. Push the request switch again within 1 minute. 4. The hazard indicator flashes once and the outside chime sounds once again. All the doors and the lift gate will unlock.
LOCK button on the Intelligent Key after the door is closed. (See “Remote keyless entry system” (P.3-21).) BATTERY SAVER SYSTEM When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery discharge. . . . The ignition switch is in the ACC position, and All doors are closed, and The shift lever is in the P (Park) position.
TROUBLESHOOTING GUIDE Symptom The SHIFT P warning appears on the display When pushing the ignition switch and the inside warning chime sounds conto stop the engine tinuously. Possible cause The shift lever is not in the P (Park) position. Action to take Shift the shift lever to the P (Park) position. When shifting the shift lever to the The ignition switch is in the ACC or ON Push the ignition switch to the OFF posiThe inside warning chime sounds continuously. P (Park) position. position. tion.
REMOTE KEYLESS ENTRY SYSTEM when: WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight. . the distance between the Intelligent Key and the vehicle is over 33 ft (10 m). . the Intelligent Key battery is discharged.
HOW TO USE REMOTE KEYLESS ENTRY SYSTEM 4. The hazard indicator flashes once again. All the doors and the lift gate will unlock. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” (P.3-23).
The door windows can be opened or closed by turning the mechanical key in a door lock. (See “Doors” (P.3-5).) Opening/closing power sliding door (if so equipped) To open/close the sliding door, push the power 3 or * 4 on the Intelligent sliding door button * Key for about 1 second. The power sliding door will automatically open/close. 3 or * 4 is If the power sliding door button * pushed while the sliding door is being opened or closed, the sliding door will reverse.
Hazard indicator and horn mode: DOOR LOCK Intelligent Key system (Using door handle or lift gate request switch) Remote keyless entry system (Using or button) DOOR UNLOCK HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indicator mode: DOOR LOCK Intelligent Key system (Using door handle or lift gate request switch) Remote keyless entry system (Using or button) DOOR UNLOCK HAZARD - twice OUTSIDE CHIME - none HAZARD -
HOOD hood to fly open and result in an accident. . If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood. SPA2858 been stopped. When opening the hood: 1 1. Pull the hood lock release handle * located below the instrument panel; the hood will then spring up slightly. 2 in between the hood 2. Locate the lever * and grille and push the lever sideways with your fingertips. 3. Raise the hood 3 . * 4. Remove the support rod 5 .
LIFT GATE . inserting the mechanical key into the driver’s door key cylinder and turning it to the rear of the vehicle twice. To close the lift gate, pull down until it securely locks. WARNING . Always be sure the lift gate has been closed securely to prevent it from opening while driving. . Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Exhaust gas (carbon monoxide)” (P.5-2) of this manual. . .
SPA2547 SPA2860 Power lift gate switch — Instrument panel SPA2851 Intelligent Key Power door main switch The power lift gate operation can be turned on or off by the power door main switch on the instrument panel. When the power door main switch is pushed to the OFF position, the power operation is not available by the power lift gate switch on the lift gate and lift gate opener switch.
Power open Reverse function NOTE: When the lift gate is fully closed, the lift gate will fully open automatically by: The power lift gate will reverse immediately if one of the following actions is performed during power open or power close. If the pinch sensor is damaged or removed, the power close function will not operate. A on pushing the power lift gate switch * the instrument panel for more than 1 second B . pushing the lift gate opener switch * C on .
CAUTION . . SPA2853 Safe Mode 1 lose pressure, If the gas stays of the lift gate * the power lift gate safe mode is activated. When the safe mode is activated, the lift gate intermittently closes. Then the lift gate will be pulled to the closed and latched position by a motor. The power lift gate cannot be opened using the switches at any time in the safe mode. Do not operate the lift gate again until it is checked by a NISSAN dealer.
FUEL-FILLER DOOR FUEL-FILLER CAP WARNING SPA2824 SPA2861 LIFT GATE RELEASE OPENING FUEL-FILLER DOOR If the lift gate cannot be opened due to a discharged battery, follow these steps. To open the fuel-filler door, pull the fuel-filler 1 . door opener handle * 1 inside of the lift gate 1. Remove the cover * with a suitable tool. 2 as illustrated to open the 2. Move the lever * lift gate. Have the vehicle checked by a NISSAN dealer. 3-30 Pre-driving checks and adjustments .
. Never pour fuel into the throttle body to attempt to start your vehicle. . Close the sliding door before opening the fuel-filler door. . Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: paint damage. . — Always place the container on the ground when filling.
TILT/TELESCOPIC STEERING WARNING SPA2833 LOOSE FUEL CAP warning The LOOSE FUEL CAP warning appears on the dot matrix liquid crystal display when the fuelfiller cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. To turn off the warning, perform the following steps: 1. Remove and install the fuel-filler cap as soon as possible. (See “Fuel-filler cap” (P.3-30).) 2. Tighten the fuel-filler cap until it clicks.
SUN VISORS MIRRORS CAUTION . Do not store the main sun visor before storing the extension sun visor. . Do not pull the extension sun visor forcedly downward. 1. To block out glare from the front, swing 1 . down the main sun visor * 2. To block glare from the side, remove the main sun visor from the center mount and 2 . swing it to the side * 3 from 3. Draw out the extension sun visor * the main sun visor to block from further glare.
Automatic anti-glare type The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the A will illuminate and excessive indicator light * glare from the headlights of the vehicle behind you will be reduced.
tion, see “HomeLink® Universal Transceiver” (P.2-59). Defrosting outside mirrors (if so equipped) OUTSIDE MIRRORS The outside mirrors will be heated when the rear window defroster switch is operated. WARNING Reverse tilt-down feature (if so equipped) Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident.
SPA1829 SIC4448 Foldable outside mirrors VANITY MIRROR Fold the outside mirror by pushing it toward the rear of the vehicle. To use the front vanity mirror, pull down the sun visor and pull up the cover. SPA2830 COMMUNICATION MIRROR (if so equipped) The communication mirror can be used to view the second or third row seat inside the vehicle. To use the communication mirror, push the lid. To store the mirror, push it in until it latches.
AUTOMATIC DRIVE POSITIONER (if so equipped) The automatic drive positioner system has two features: . . Entry/exit function Memory storage ENTRY/EXIT FUNCTION This system is designed so that the driver’s seat will automatically move when the shift lever is in the P (Park) position. This allows the driver to get into and out of the driver’s seat more easily. The driver’s seat will slide backward when the driver’s door is opened with the ignition switch in the LOCK position.
The indicator light for the pushed memory switch will stay on for approximately 5 seconds after pushing the switch. Confirming memory storage . If memory is stored in the same memory switch, the previous memory will be deleted. Linking Intelligent Key to a stored memory position The Intelligent Key can be linked to a stored memory position with the following procedure. . 1. Follow one of the steps for storing a memory position. .
. When the driver’s door remains open for more than 45 seconds and the ignition switch is not in the ON position.
MEMO 3-40 Pre-driving checks and adjustments
4 Monitor, heater, air conditioner, audio, phone and voice recognition systems Safety note .................................................................................. 4-3 Center multi-function control panel (if so equipped) ...... 4-3 How to use multi-function controller .............................. 4-5 How to use touch screen (models with navigation system) .............................................................. 4-5 Menu options (models with navigation system) ..........
DVD (Digital Versatile Disc) player operation (if so equipped) ..................................................................... 4-83 USB memory operation (models with center multi-function control panel) ......................................... 4-86 Bluetooth® streaming audio (models with navigation system) ........................................................... 4-91 iPod® player operation (models with center multi-function control panel) .........................................
SAFETY NOTE CENTER MULTI-FUNCTION CONTROL PANEL (if so equipped) WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. .
SAA3613 Models without navigation system 1. 2. 3. 4. 5. 6. 7. 8. 9. “INFO” button (P.4-9) “STATUS” status display button (P.4-8) “DISP” display setting button (P.4-13) “ ” brightness UP button (P.4-8) “ ECON” button (P.4-9) “SETTING” button (P.4-13) Multi-function controller (P.4-5) “ OFF” brightness control and display ON/ OFF button (P.4-8) “ ” brightness DOWN button (P.4-8) SAA3025 With navigation system When you use this system, make sure the engine is running.
HOW TO USE MULTI-FUNCTION CONTROLLER Choose an item on the display by rotating or 1 upward/ downward, pushing the center dial * 2 for operation. and push the ENTER button * 3 before the If you push the BACK button * setup is completed, the setup will be canceled and/or the display will return to the previous screen. This button can also be used to delete characters that have been input. CAUTION . The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object.
. . Delete: Deletes the last character that has been input with one touch. Push and hold the button to delete all of the characters. OK: Completes character inputs. Touch screen maintenance SAA2474 Adjusting an item: 1 or − Touch the + * settings. 2 * button to adjust the 3 or 4 button to move Touch the * * to the previous or next item. 5 or 6 button to move Touch the * * to the previous or next page. SAA2475 Inputting characters: Touch the letter or number . . . . 4-6 1 .
SAA3673 MENU OPTIONS (models with navigation system) The start menu can be displayed using the menu control switch on the steering-wheel-mounted controls. 1. While the MAP or STATUS screen is displayed, push and hold the menu control switch until the “Menu Options” screen appears. 2. Highlight the preferred item by tilting the menu control switch up or down, and then push the menu control switch to select it.
HOW TO SELECT MENUS ON THE SCREEN Vehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the multifunction controller and push the ENTER button. about the menu selection currently highlighted. (for example, Adjust head lamp on time after shut-off.) Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1.
HOW TO USE ECON BUTTON (models without navigation system) Vehicle information display Push the “ ECON” button to show fuel economy information. (See “How to use INFO button” (P.4-9).) 2. Select an item from the INFO menu. 1. Push the INFO button on the control panel. HOW TO USE INFO BUTTON 3. After viewing or adjusting the information on the following screens, push the BACK button to return to the INFO menu. The display screen shows vehicle and navigation information for your convenience.
Fuel Economy information The approximate distance to empty, average fuel economy and current fuel economy will be displayed for reference. To reset the average fuel economy (Avg Fuel Econ or Average Fuel Economy), select the “Reset Fuel Eco” or “Reset” key. If the “Fuel Eco History” or “View” key is selected, the average fuel consumption history will be displayed in graph form along with the average for the previous Reset-to-Reset period.
Maintenance information The maintenance intervals can be displayed for the engine oil, oil filter, tire and other reminders. To set a maintenance interval, select a preferred item from the list. You can also set to display a message to remind you that the maintenance needs to be performed. The following example shows how to set the engine oil maintenance information. Use the same steps to set the other maintenance information.
1. Set the interval (mileage) of the maintenance schedule. To determine the recommended maintenance interval, refer to your “NISSAN Service and Maintenance Guide”. 2. To display the reminder automatically when the desired distance is reached, select the “Reminder” key. 3. Reset the driving distance to the new maintenance schedule. 4. To return to the previous screen, push the BACK button. The unit can be converted between “US” and “Metric”. (See “How to use SETTING button” (P.4-13).
Navigation System Owner’s Manual. HOW TO USE SETTING BUTTON Voice Recognition: For the details of this item, see “NISSAN voice recognition system (models with navigation system)” (P.4-137). The display as illustrated will appear when the SETTING button is pushed. For navigation settings, refer to the separate Navigation System Owner’s Manual.
Audio settings The display as illustrated will appear when pushing the SETTING button and selecting the “Audio” key. Bass/Treble/Balance/Fade: To adjust the speaker tone quality and sound balance, select the “Bass”, “Treble”, “Balance” or “Fade” key and adjust it with the multifunction controller. These items can also be adjusted by pushing and turning the AUDIO knob. SAA2485 Models with navigation system Speed Sensitive Vol.: The audio system’s volume is increased with the vehicle speed.
“Guidance Volume” and adjust it with the multifunction controller. You can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being announced. Ringtone/Incoming Call/Outgoing Call: For the details of these items, see “Bluetooth® hands-free phone system (models with navigation system)” (P.4-114).
REAR DISPLAY settings (if so equipped) The “Rear Display” screen will appear when pushing the SETTING button, selecting the “Rear Display” key. Rear Display (models with navigation system)/Rear Display Open (models without navigation system): When this item is turned to ON, the rear display opens. When the ignition switch is pushed to the “ACC” or “ON” position, the rear display is flipped down automatically.
Brightness/Contrast/Background Color: To adjust the brightness, contrast and background color of the screen, select the appropriate “Brightness”, “Contrast” or “Background Color” key and push the ENTER button. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished. To turn on the screen, set this item to the ON position, or push and hold the “ OFF” button.
Comfort settings Models with navigation system The display as illustrated will appear when pushing the SETTING button, selecting the “Others” key and then selecting the “Comfort” key. This key does not appear on the display until the ignition switch is pushed to the ON position. Models without navigation system JVH0157M SAA2488 Models with navigation system Auto Interior Illumination: When this item is turned on, the interior lights will illuminate if any door is unlocked.
Clock settings Slide Driver Seat Back on Exit (if so equipped): When this item is turned on, the driver’s seat moves backward for easy exit if the ignition switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and pushing the ignition switch to the ACC position, the driver’s seat moves to the previous position. Selective Door Unlock: When this item is turned on, only the driver’s door is unlocked first after the door unlock operation.
hour or per minute. Language & Units settings Daylight Saving Time: Turn this item to ON for daylight saving time application. Models with navigation system The Language & Units settings display will appear when pushing the SETTING button, selecting the “Others” key, and then selecting the “Language & Units” key. Time Zone: Choose the time zone from the following Models without navigation system Models with navigation system . Pacific . Mountain . Central . Eastern . Atlantic . Newfoundland . Hawaii .
Voice Recognition settings (models with navigation system) vehicle in a safe location and apply the parking brake. For details about the “Voice Recognition” settings, see “NISSAN voice recognition system (models with navigation system)” (P.4-137). CAMERA settings (if so equipped) The “CAMERA” screen will appear when selecting the “Camera” key. For the details about the camera system operation, see “Rearview monitor” (P.4-23).
. (Previous) ” key to display the previous Select the “ file. Setting the Image Viewer: The Image Viewer setting display will appear when selecting the “Settings” key on the full screen display. The following settings are available for the full screen display. . SAA2492 Full Screen Display: The full screen display will appear when selecting the “Full Screen Display” key. To operate the Image Viewer or to change the settings, select the desired key using the multifunction controller. . . .
REARVIEW MONITOR (if so equipped) The system is designed as an aid to the driver in situations such as slot parking or parallel parking. When the shift lever is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle. because of its monitoring range limitation. . Do not put anything on the RearView camera. The RearView camera is installed above the license plate. . When washing the vehicle with high-pressure water, be sure not to spray it around the camera.
Predictive course lines equipped): 6 * (if so Indicate the predictive course when backing up. The predictive course lines will be displayed on the monitor when the shift lever is in the R (Reverse) position and the steering wheel is turned. The predictive course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the neutral position. The vehicle width and predictive course lines are wider than the actual width and course. WARNING .
5. When the vehicle is parked in the space completely, move the shift lever to the P (Park) position and apply the parking brake. SAA1898 SAA2019 3. Slowly back up the vehicle adjusting the steering wheel so that the predictive course B enter the parking space * C . lines * 4. When the rear of the vehicle enter the C , maneuver the steering parking space * wheel to make the vehicle width guide lines D parallel to the parking space * C .
DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DISTANCES the hill is viewed in the monitor closer than it appears. Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the A , but the actual 3 ft (1 m) distance on place * B . Note that any object on the hill is the place * the hill is viewed in the monitor further than it appears.
course. SAA2021 Backing up near a projecting object A (if so equipped) The predictive course lines * do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual backing up course. SAA2022 Backing up behind a projecting object C The position * is shown further than the B position * in the display. However, the C is actually at the same distance position * A .
PREDICTIVE COURSE LINE SETTINGS (if so equipped) To turn ON or OFF the predictive course line display, push the SETTING button, select the “Camera” key and push the ENTER button. Predictive Course Lines: When this item is turned on, the predictive course lines will be displayed on the monitor when the shift lever is in the R (Reverse) position. HOW TO ADJUST THE SCREEN SAA2404 Models with navigation system .
AROUND VIEWTM MONITOR (if so equipped) OPERATING TIPS . . . . . . . . . When the shift lever is shifted to the R (Reverse) position, the monitor screen automatically changes to the RearView Monitor mode. However, the radio can be heard. When the temperature is extremely high or low, the screen may not clearly display objects. This is not a malfunction. When strong light is directly coming on the camera, objects may not be displayed clearly. This is not a malfunction.
WARNING . . Do not use the Around View Monitor with the outside mirror in the stored position, and make sure that the lift gate is securely closed when operating the vehicle using the Around View Monitor. . The distance between objects viewed on the Around View Monitor differs from the actual distance. . The cameras are installed above the front grille, the outside mirrors and above the rear license plate. Do not put anything on the cameras.
: Shift the shift lever : Push the CAMERA button A : Original screen before the Around View Monitor * is operated B : Rear view/bird-eye view screen * C : Rear view/front-side view screen * D : Front view/bird-eye view screen * E : Front view/front-side view screen * HOW TO SWITCH THE DISPLAY The Around View Monitor display consists of the left and the right screens. You can see a combination of different views on the screens as illustrated. Activating Around View Monitor Shift lever operation: .
CAMERA button operation: . 8 ) When the CAMERA button is pushed (* while a screen other than the Around View A Monitor * is displayed, Around View Monitor is activated and the front view/ D is displayed. bird’s-eye view screen * HOW TO SEE EACH VIEW WARNING . The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a paved, level surface.
Front and rear view Guiding lines, which indicate the vehicle width and distances to objects with reference to the A vehicle body line * , are displayed on the monitor. WARNING . The distance between objects viewed in the rear view may differ from the actual distance. Objects in the rear view will appear visually opposite from those viewed in the inside and outside mirrors. . On a snow-covered or slippery road, there may be a difference between the predictive course line and the actual course line. .
displayed. line is displayed only on the opposite side of the turn. In addition, the non-viewable corners are dis3 played in red (blink for the first 3 seconds) * to remind the drivers to be cautious. WARNING . Objects in the bird’s-eye view will appear further than the actual distance because the bird’s-eye view is a pseudo view that is processed by combining the views from the cameras on the outside mirrors, the front and the rear of the vehicle. .
CAUTION . There is a plastic cover over the camera. Do not scratch the cover when cleaning dirt or snow from the cover. . The turn signal light may look like the side-of-vehicle line. This is not a malfunction. SAA3571 Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. 1 shows the front part The front-of-vehicle line * of the vehicle.
DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DISTANCES the hill is viewed in the monitor closer than it appears. Moving to a steep uphill When moving the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the A , but the actual 3 ft (1 m) distance on place * B . Note that any object on the hill is the place * the hill is viewed in the monitor further than it appears.
SAA2021 Moving near a projecting object A do not touch the The predictive course lines * object in the display. However, the vehicle may hit the object if it projects over the actual moving course. JVH0338X There may be a small distance visible between the vehicle and the object in the bird’s-eye view B . on the display * SAA2022 Moving closer to a projecting object C The position * is shown further than the B position * in the display. However, the C is actually at the same distance position * A .
VENTILATORS course. . HOW TO ADJUST THE SCREEN To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor, push the SETTING button with the Around View Monitor on, select the item key and adjust the level using the multi-function controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied.
HEATER AND AIR CONDITIONER WARNING SAA3676 Side REAR VENTILATORS If the center knob is moved fully to the left or right, the ventilators will be closed. : Adjust the air flow direction of the ventilators by 2 (up/down, left/right) moving the center knob * until the desired position is achieved. . Never leave children or adults who would normally require the support of others alone in the vehicle. Pets should not be left alone either.
even if the engine is turned off and the ignition switch is in the “ON” position. OPERATING TIPS (for automatic air conditioner) NOTE: . Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents. . When parking, set the heater and air conditioner controls to turn off air recirculation to allow fresh air into the passenger compartment. This should help reduce odors inside the vehicle.
11. “REAR” control button SAA3596 MANUAL AIR CONDITIONER 1. 2. 3. 4. 5. 6. Temperature control buttons ” air recirculation button “ “ ” outside air circulation button FRONT” front defroster button “ Display “ REAR” rear window defroster button (See 7. 8. 9. 10. “Rear window and outside mirror defroster switch” (P.2-32).
Controls To turn off the heater and air conditioner, push the “ON·OFF” button. Fan speed control: Push the fan speed control button “ increase the fan speed. Push the fan speed control button “ decrease the fan speed. ” to ” to recirculate interior air inside the vehicle. The indicator light on the air recirculation “ ” button will illuminate. Ventilation: This mode directs outside air to the side and center ventilators.
2. Push the air flow control button to change to the mode. 3. Push the fan speed control buttons to the desired fan speed. 3. Push the fan speed control buttons to set the desired fan speed. 4. Push the A/C button on. (The A/C indicator light will illuminate.) buttons to 4. Push the A/C button on. (The A/C indicator light will illuminate.) 3. Push the temperature control buttons to set the desired temperature. 5.
Rear air conditioning system Operating from front control buttons: To control the rear air conditioning system independently with the front air conditioner control panel, push the “REAR” button. When the rear air conditioning system control is on, the indicator light on the “REAR” button will illuminate and “REAR” will appear on the display. In this state, the rear air conditioning system can be adjusted with the front air conditioner control panel.
front display). “OFF” button: Turns off the rear air conditioning system. “ ” Fan speed control buttons: Adjust rear fan speed “MODE” button: Changes the rear air flow “TEMP” buttons: Adjust the rear temperature SAA3674 1. 2. 3. 4. 5. “OFF” button “ ” Fan speed control buttons Display “MODE” button “TEMP” buttons Rear control buttons: The rear seat passengers can adjust the rear air conditioning system using the control switches located on the ceiling above the rear seats.
9. 10. 11. 12. 13. 14. SAA3595 AUTOMATIC AIR CONDITIONER 1. 2. 3. Temperature control buttons (driver side) ” air recirculation button “ “ AUTO” auto-recirculation button (models ” with Advanced Climate Control System)/“ Outside air circulation button (models without Advanced Climate Control System) 4. 5. 6. 7. 8. FRONT” front defroster button “ Display REAR” rear window defroster button (See “ “Rear window and outside mirror defroster switch” (P.2-32).
Automatic operation (AUTO) The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed after the desired temperature is set manually. To turn the heater and air conditioner on or off, push the “ON·OFF” button. Cooling and dehumidified heating: 1. Push the “AUTO” button. (The AUTO indicator light will illuminate.) 2. If the A/C indicator light does not illuminate, push the “A/C” button. (The A/C indicator light will illuminate.) 3.
. Pushing the “DUAL” button allows the user to independently change the front passenger’s side temperature with the passenger side temperature control buttons (“ ” or “ ”). (“DUAL” will appear on the display.) To cancel the separate temperature setting, push the “DUAL” button (“DUAL” will disappear from the display) and the driver’s side temperature setting will be applied to both the driver’s and front passenger’s sides. 4. Models with Advanced Climate Control System: .
Air flow control: Push the “MODE” button to change the air flow mode. : : : : Air flows from the center and side ventilators. Air flows from the center and side ventilators, and foot outlets. Air flows mainly from the foot outlets. Air flows from the defroster and foot outlets. Temperature control: Push the temperature control buttons (“ and “ ”) to set the desired temperature. ” The temperature can be set within the range of 60 to 908F (18 to 328C).
interior trim. When the air conditioner is turned on, the system generates Plasmacluster® ions automatically. “The high-density Plasmacluster® ions generated in the air conditioner’s air stream not only suppress airborne bacteria and reduce the adherence of odors to the interior trim, but also have a proven skin moisture preserving effect.
Rear air conditioning system To control the rear air conditioning system independently with the front air conditioner control panel, push the “REAR” button. When the rear air conditioning system control is on, the indicator light on the “REAR” button will illuminate and “ ” will appear on the display. In this state, the rear air conditioning system can be adjusted with the front air conditioner control panel.
Rear control buttons: The rear seat passengers can adjust the rear automatic air conditioning system using the control switches located on the ceiling above the rear seats (models with NISSAN mobile entertainment system) or on the upper left side of the second row seat (models without NISSAN mobile entertainment system). The rear control buttons do not function when “ ” is shown on the front display.
AUDIO SYSTEM IN-CABIN MICROFILTER AUDIO OPERATION PRECAUTIONS function in your NISSAN radio system. The climate control system is equipped with an in-cabin microfilter which collects dirt, pollen, dust, etc. To make sure the air conditioner heats, defogs, and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the NISSAN Service and Maintenance Guide. To replace the filter, contact a NISSAN dealer.
Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard. This can be reduced by lowering the treble setting to reduce the treble response. Multipath reception: Because of the reflective characteristics of FM signals, direct and reflected signals reach the receiver at the same time.
. . . . . . . SAA0480 Compact Disc (CD) player . . Do not force a compact disc into the CD insert slot. This could damage the CD and/ or CD changer/player. Trying to load a CD with the CD door closed could damage the CD and/or CD changer. . During cold weather or rainy days, the player may malfunction due to the humidity. If this occurs, remove the CD and dehumidify or ventilate the player completely. The player may skip while driving on rough roads.
. . . . . . LHA0484 DVD (Digital Versatile Disc) player (if so equipped) . . Do not force a compact disc into the CD/ DVD insert slot. This could damage the CD/ DVD player. During cold weather or rainy days, the player may malfunction due to humidity. If this occurs, remove the CD/DVD and dehumidify . or ventilate the player completely. The player may skip while driving on rough roads. The CD/DVD player sometimes cannot function when the passenger compartment temperature is extremely high.
— The file is not MP3, WMA, AAC, M4A or DivX® type. Region Invalid: — The DVD is not for region 1 or all regions. Use DVDs with a region code “1”, “ALL” or “1 included” for your DVD entertainA is ment system. (The region code * displayed as a small symbol printed on B .) This vehiclethe top of the DVD * installed DVD player cannot play DVDs with a region code other than “1” or “ALL”. Copyright and trademark: . The technology protected by the U.S.
devices, USB hard drives and iPod® players. Some USB devices may not be supported by this system. . . . Partitioned USB devices may not be played correctly. . Some characters used in other languages (Chinese, Japanese, etc.) are not displayed properly on display. Using English language characters with a USB device is recommended. General notes for USB use: Refer to your device manufacturer’s owner information regarding the proper use and care of the device.
. . ID3/WMA Tag — The ID3/WMA tag is the part of the encoded MP3 or WMA file that contains information about the digital music file such as song title, artist, album title, encoding bit rate, track time duration, etc. ID3 tag information is displayed on the Album/Artist/Track title line on the display. * Windows® and Windows Media® are registered trademarks or trademarks of Microsoft Corporation in the United States of America and/or other countries. .
Specification chart (for FM-AM Radio with Compact Disc (CD) Player): Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System Component (on a Windows Vista-based computer) are not supported. MP3 Supported versions*1 WMA*3 Version MPEG1, MPEG2, MPEG2.
Specification chart (for FM-AM-SAT Radio with Compact Disc (CD) Player (Type A)): Supported media CD, CD-R, CD-RW, USB2.0 CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista-based computer) are not supported.
Specification chart (for FM-AM-SAT radio with Compact Disc (CD) player (TypeB)): Supported media CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB2.0 CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista-based computer) are not supported. UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0 * VDF1.5/VDF2.0 (packet writing) is not supported.
*4 *5 When VBR files are played, the playback time may not be displayed correctly. Models with navigation system.
Troubleshooting guide: Symptom Cause and Countermeasure Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.
Compressed Video Files (if so equipped) Explanation of terms: . DivX® - DivX® refers to the DivX® codec owned by DivX, Inc. used for a lossy compression of video based on MPEG-4. . AVI - AVI stands for Audio Video Interleave. It is a standard file format originated by Microsoft Corporation. A “.divx” encoded file can be saved into the “.avi” file format for playback on this system if it meets the requirements stated in the table in this section. However, not all the “.
Bluetooth® Audio player (models with navigation system) Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and licensed to Clarion Co., Ltd. . . . . . . . ® Some Bluetooth audio devices may not be recognized by the in-vehicle audio system. It is necessary to set up the wireless connection between a compatible Bluetooth® audio device and the in-vehicle Bluetooth® module before using the Bluetooth® audio player. Operating procedure of the Bluetooth ® audio player will vary depending on the device.
13. 14. 15. AUX (Auxiliary) button AUX (Auxiliary) IN jack TUNE·FOLDER knob/MENU button JVH0335X FM-AM RADIO WITH COMPACT DISC (CD) PLAYER 1. 2. 3. 4. 5. TRACK button SEEK button CD EJECT button Display Radio memory buttons 6. 7. 8. 9. 10. 11. 12.
Audio main operation The audio system operates when the ignition switch is in the “ACC” or “ON” position. ON·OFF/Volume contorol: To turn on the audio system, push the Power button. . The system will turn on in the mode (radio or CD) which was used immediately before the system was turned off. . If no CD is loaded, the radio will be turned on. To turn on and off the audio system, push the Power button. To control the volume, turn the VOL control knob. Adjusting sound preference: 1.
TRACK button is pushed and held. Compact Disc (CD) player operation SCAN tuning: When the SCAN button is pushed, the system will seek and stop at the detected broadcasting station for 5 seconds, and then it will start to seek for the next broadcasting station. Place the ignition switch in the ACC or ON position, and insert the CD into the slot with the label side facing up. The CD will be guided automatically into the slot and start playing.
REPEAT (RPT), RANDOM (RDM): When the RPT/RDM button is pushed while a CD is playing, the play mode will change as follows: If the CD comes out and is not removed, it will be pulled back into the slot to protect it. CD: DISC REPEAT ? TRACK REPEAT ? DISC RANDOM ? DISC REPEAT CD with MP3/WMA: DISC REPEAT ? FOLDER REPEAT ? TRACK REPEAT ? DISC RANDOM ? FOLDER RANDOM ? DISC REPEAT SCAN tuning: When the SCAN button is pushed while a CD is being played, the first 10 seconds of all the tracks will be played.
14. 15. 16. 17. 18. RDM (random) play button Radio station preset select buttons AUX IN jack TUNE·SCROLL control knob ENTER/SETTING button FM-AM-SAT RADIO WITH COMPACT DISC (CD) PLAYER (Type A) For all operation precautions, see “Audio operation precautions” (P.4-53). . . . JVH0160X 1. 2. 3. 4. 5. 6. 7. FM·AM band select button CD EJECT button XM band select button DISP (display) button Color display iPod® MENU button Radio CAT (category)/REW (rewind) button for SEEK/TRACK 8. 9. 10. 11. 12. 13.
Audio main operation Head unit: The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback. PWR/Volume control: Place the ignition switch in the ACC or ON position, and then push the PWR button while the system is off to turn on the last audio source, which was playing immediately before the system was turned off. While the system is on, pushing the PWR button turns the system off. Turn the VOL control knob to adjust the volume. . . .
. . the ENTER button. You can toggle between ON and OFF using the TUNE·SCROLL control knob. RDS Display When this has been set to ON, RDS (radio data system) information will be shown on the display. Select RDS Display and then push the ENTER button. You can toggle between ON and OFF using the TUNE·SCROLL control knob. iPod Menu language The iPod menu language can be set to English, French or Spanish. Select iPod menu language and then push the ENTER button.
Do not use 3.1 in (8 cm) discs. from low to high frequencies and stop at each broadcasting station/channel for 5 seconds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station/channel. PLAY: When the CD·AUX button is pushed with the system off and the CD loaded, the system will turn on and the CD will start to play. If the Radio SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves to the next station/channel.
REPEAT (RPT): When the RPT play button is pushed while the CD is played, the play pattern can be changed as follows: If the CD comes out and is not removed, it will be pulled back into the slot to protect it. AUX (Auxiliary) input Normal ? 1 Folder Repeat ? 1 Track Repeat ? Normal AUX IN jack: The AUX IN jack is located on the audio unit. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer.
of the device. WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. PLAY: When the CD·AUX button is pushed with the system off and the USB memory inserted, the system will turn on. If another audio source is playing and a USB memory is inserted, push the AUX button repeatedly until the center display changes to the USB memory mode. CAUTION . . .
Inc., registered in the U.S. and other countries. WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. Refer to your device manufacturer’s owner information regarding the proper use and care of the device. Compatibility: The following models are available: . . . SAA3600 .
Fifth generation iPod nano® (Firmware version 1.0.1 or 1.0.2) The iPod touch® may not response quickly with the system in some cases. . Make sure that the iPod® firmware is updated. Audio main operation: Place the ignition switch to the ACC or ON position. Then, push the CD·AUX button repeatedly to switch to the iPod® mode. If the system has been turned off while the iPod® was playing, pushing the PWR button will start the iPod®. iPod® MENU button: Place the ignition switch in the ACC or ON position.
FM-AM-SAT RADIO WITH COMPACT DISC (CD) PLAYER (Type B) For all operation precautions, see “Audio operation precautions” (P.4-53). The satellite radio mode requires an active SiriusXM Satellite Radio subscription. The satellite radio is not available in Alaska, Hawaii and Guam. It may take some time to receive the activation signal after subscribing the SiriusXM Satellite Radio. After receiving the activation signal, an available channel list will be automatically updated in the radio.
Turn the VOL control knob to adjust the volume. FM-AM-SAT radio operation Adjusting tone quality and speaker balance: To adjust Bass, Treble, Balance and Fade, push the Audio control knob. When the display shows the setting you want to change (Bass, Treble, Balance and Fade), rotate the Audio control knob to set the desired setting. For the other setting methods, see “How to use SETTING button” (P.4-13).
. UPDATING (When the satellite radio subscription is not active) SCAN tuning: Push the SCAN tuning button to tune from low to high frequencies and stop at each broadcasting station/channel for 5 seconds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station/channel. If the SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves to the next station/channel.
was playing, pushing the ON·OFF button will start the CD. — 1 Track Repeat — 1 Disc Random — 1 Folder Random (CD with compressed audio files) Do not use 3.1 in (8 cm) discs. PLAY: When the DISC·AUX button is pushed with the system off and the CD loaded, the system will turn on and the CD will start to play. When the DISC·AUX button is pushed with the CD loaded and the radio playing, the radio will automatically be turned off and the CD will start to play.
When the or button is pushed for less than 1.5 seconds while the CD is being played, the next track or the beginning of the current track on the CD will be played. REPEAT (RPT), RANDOM (RDM): When the RPT button is pushed while the CD is played, the play pattern can be changed as follows: (CD) DVD (Digital Versatile Disc) PLAYER OPERATION (if so equipped) Precautions Start the engine when using the DVD entertainment system.
Playing a DVD Select the “ ” key to pause the DVD. To resume playing the DVD, use the “PLAY” key. Push the DISC·AUX/DVD button on the instrument panel and turn the display to the DVD mode. Select the “ ” key to start playing the DVD, for example, after pausing the DVD. When a DVD is loaded, it will be replayed automatically. SAA2497 Type A PAUSE: DISC·AUX/DVD button: Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images.
DVD settings Select the “Settings” key to adjust the following settings. Key (DVD-VIDEO) (Type A): Keys for the DVD menu operation are displayed. : Move the cursor to select a DVD menu. Enter: Enter the selected menu. Move: Change the display location by moving the operation key. Back: Return to the previous screen. SAA2498 Hide: Hide the operation key. Title Menu (DVD-VIDEO): Some menus specific to each disc will be shown. For details, see the instructions on the disc.
“+” side or “−” side. DRC (DVD-VIDEO, DVD-VR): DRC (Dynamic Range Compression) automatically adjusts the soundtrack volume level to maintain a more even sound to the speakers. Play Mode: Select the preferred play mode. PG/PL Mode (DVD-VR): Select the “PG” or “PL” mode. DVD Language (DVD-VIDEO, VIDEO-CD): Select the “DVD Language” key to open the number entry screen. Input the number corresponding to the preferred language and select the “OK” key.
of the device. WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION . . . Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port.
Audio file operation PLAY: When the DISC·AUX button is pushed with the system off and the USB memory inserted, the system will turn on. If another audio source is playing and a USB memory is inserted, push the DISC·AUX button repeatedly until the center display changes to the USB memory mode. SAA2501 Models with navigation system or / Next/Previous File and Fast Forward/Rewind: When the or button is pushed for more than 1.
. Play Mode Select the preferred play mode. Text (models without navigation system): When the “Text” key is selected on the screen using the multi-function controller and then the ENTER button is pushed while a USB memory is being played, the music information listed below will be displayed on the screen. SAA2502 Menu (models with navigation system): There are some options available during playback. Select one of the following options that are displayed on the screen if necessary.
Operation keys: To operate the USB memory, select the desired key displayed on the operation screen using the multi-function controller. List: Select the “List” key on the movie file operation screen to display the file list. Pause Select the “ ” key to pause the movie file. To resume playing the movie file, select the “ ” key. Play Select the “ ” key to start playing a movie file, for example, after pausing a movie file. SAA2504 Example STOP Select the “ ” key to stop playing a movie file.
. . . . . the “OK” key. The specified folder/file will be played. Display To adjust the image quality of the screen, select the preferred adjustment items. DRC DRC (Dynamic Range Compression) automatically adjusts the soundtrack volume level to maintain a more even sound to the speakers. Audio Select the preferred language for audio. Subtitle Select the preferred language for subtitle. Display Mode Select the “Normal”, “Wide”, “Cinema” or “Full” mode.
Bluetooth trademark: Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and licensed to Clarion Co., Ltd. JVH0158M Connecting procedure 1. Push the SETTING button and select the “Bluetooth” key. 4-92 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2506 2. Select the “Connect Bluetooth” key.
SAA2507 3. A confirmation screen will be displayed. Select “No”. Note: Selecting “Yes” will only connect the hands free phone portion of a Bluetooth® device. SAA3005 4. Choose a PIN code to use with the compatible Bluetooth® audio device using the number input screen. The PIN code will need to be entered into the Bluetooth® audio device after step 5. Select the “OK” key. SAA3006 5. The standby message screen will appear. Operate the compatible Bluetooth® audio device.
DISC·AUX button: When the DISC·AUX button is pushed with the system off and the Bluetooth® audio device connected, the system will turn on. If another audio source is playing and the Bluetooth® audio device is connected, push the DISC·AUX button repeatedly until the display changes to the Bluetooth® audio mode. SAA2510 Audio main operation Push the ignition switch to the ACC or ON position. Then, push the DISC·AUX button repeatedly to switch to the Bluetooth® audio mode.
. . Connected Devices: Registered devices are shown on the list. Select a Bluetooth® device from the list, the following options will be available. Shuffle Choose “Shuffle OFF”, “Shuffle All Tracks” and “Shuffle Group”. Repeat Choose from “Repeat OFF”, “Repeat 1 Track”, “Repeat All Tracks” and “Repeat Group”. . . SAA2511 Bluetooth® settings To set up the Bluetooth® device system to the preferred settings, push the SETTING button and select the “Bluetooth” key.
the U.S. and other countries. WARNING Refer to your device manufacturer’s owner information regarding the proper use and care of the device. Compatibility Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION SAA3600 iPod® PLAYER OPERATION (models with center multi-function control panel) . Do not force the USB device into the USB port.
Second generation iPod Classic® (firmware version 2.0 PC) . First generation iPod touch® (firmware version 2.1) . Second generation iPod touch® (firmware version 2.1.1) . First generation iPod nano® (firmware version 1.3.1) . Second generation iPod nano® (firmware version 1.1.3) . Third generation iPod nano® (firmware version 1.1 PC) . Third generation iPhone® (firmware version 2.1) Make sure that the iPod® version is updated. . Audio main operation Push the ignition switch to the ACC or ON position.
. Red - right channel audio input Before connecting a device to a jack, turn off the power of the portable device. With a compatible device connected to the jacks, push the DISC·AUX button repeatedly until the display switches to the AUX mode. SAA3601 AUXILIARY INPUT JACKS (if so equipped) SAA2496 Models with navigation system The auxiliary input jacks are located in the center console.
. AUX Menu When the “Menu” key on the display is selected while in the AUX mode, the menu screen will be displayed. USB memory Display Mode: Choose the display mode from the following items. . . . . . . . Normal Wide Cinema Volume Settings (models with navigation system): Choose the volume setting from the following items. Low Medium High Display (models with navigation system): Adjust the image quality of the screen, select the preferred adjustment items.
STEERING-WHEEL-MOUNTED CONTROLS FOR AUDIO (if so equipped) Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) While the display is showing a MAP (navigation systems only), STATUS or Audio screen, tilt the switch upward or downward to select a station, track, CD or folder. For most audio sources, tilting the switch up/down for more than 1.5 seconds provides a different function than tilting up/down for less than 1.5 seconds.
Pushing the menu control switch will show the XM Menu. . iPod® (if so equipped): . Tilting up/down for less than 1.5 seconds will skip up/down to the next or previous track. . Tilting up/down for more than 1.5 seconds will skip to the next or previous playlist. . Pushing the menu control switch will show the iPod Menu. . . CD: . Tilting up/down for less than 1.5 seconds will skip up/down to the next or previous track. . Tilting up/down for more than 1.
NISSAN MOBILE ENTERTAINMENT SYSTEM (MES) (if so equipped) This vehicle is equipped with the mobile entertainment system, which enables you to play a Digital Versatile Disc (DVD) or USB, providing the images and sounds both in the front and rear display screens. . . WARNING . The driver must not attempt to operate or view the Mobile Entertainment System (MES) while the vehicle is in motion so that full attention may be given to vehicle operation. .
components. Do not use solvents or cleaning solutions. CAUTION . Do not force a DVD into the slot. This could cause damage the player. . Do not use 8 cm (3.1 in) discs. . Be sure to stow the rear display when it is not used. Displays WARNING SAA3607 DIGITAL VERSATILE DISC (DVD) SYSTEM COMPONENTS DVD drive Park the vehicle in a safe location and apply the parking brake to view the images on the front center display screen using the DVD drive or other devices connected to the auxiliary input jacks.
CAUTION Do not touch the display when it is opening or closing. Headphones CAUTION SAA3655 Flip-down screen Use the remote controller to operate the motorized flip-down rear display screen. 1. Push the REAR DISPLAY OPEN/CLOSE button on the remote controller to open or close the display. 2. Adjust the display angle by pushing the DISPLAY TILT button or . Do not leave headphones on the seats.
. . the headphones maybe out of the range of the transmitter installed in the rear flip-down display screen. This is not a malfunction, or the sound may be interrupted temporarily when there is an obstacle between the headphones and the transmitter. Remove the obstacle, such as opaque materials, hands, hair, etc. SAA3609 Volume control: Turn the volume control knob to adjust the volume.
. SAA3704 Models without navigation system Remote controller The remote controller has the following controls: . Models with navigation system 1) REAR DISPLAY OPEN/CLOSE button 2) DVD button 3) Joystick 4) AUX button 5) ENTER button 6) DISP button 7) SPEAKER VOLUME CONTROL button or ) ( 8) TRACK/CHANNEL button or ) ( 9) DISPLAY TILT button ( or ) 10) USB button (if so equipped) 11) BACK button 12) SOUND button 13) Keypad (Some models do not have a Commercial Skip button.
Remote controller and headphones battery replacement Replace the battery as follows: 1. Open the lid. The lid is easy to open if a flat head screwdriver etc., is used. SAA0978 3. Close the lid securely. Remote controller SAA3611 Headphones 2. Replace both batteries with new ones. . Size AA (remote control) . Size AAA (headphones) Make sure that the + and 7 ends on the batteries match the markings inside the compartment.
BEFORE OPERATING THE DVD MOBILE ENTERTAINMENT SYSTEM Precautions Start the engine when using the DVD entertainment system. WARNING The driver must not attempt to operate the DVD system or wear the headphones while the vehicle is in motion so that full attention may be given to vehicle operation. CAUTION . Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. . Do not allow the system to get wet.
PLAYING A DVD Adjust Front/Rear display DVD operation keys DISC·AUX button Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images. Front display: To adjust the front display, push the SETTING button while the DVD is being played, select the “Others” key and then select the “Display” key. To operate the DVD drive, select the desired key displayed on the operation screen using the multi-function controller.
number of times the ENTER button is pushed. To skip the chapter(s) forward, it is also possible to push the “ ” button on the keypad of the remote controller. SKIP (REWIND): ” key to skip the chapter(s) of Select the “ the disc backward. The chapters will go back the number of times the ENTER button is pushed. To skip the chapter(s) backward, it is also possible to push the “ ” button on the keypad of the remote controller.
Setting keys selected. Select the “Settings” key with the multi-function controller and push the ENTER button to adjust the following settings. 10 Key Search (DVD-VIDEO, VIDEO-CD, CD-DA): Select the “10 Key Search” key and push the ENTER button to open the number entry screen. The items indicated with “ * ” can also be set from the rear display. Push the “ DVD” button on the remote controller while a DVD is being played.
To turn off the subtitles, push and hold the ENTER button until a beep sounds. Display Mode (DVD-VIDEO, VIDEO-CD): Choose from the “Full”, “Wide”, “Normal” or “Cinema” mode using the multi-function controller and push the ENTER button again. Play Mode: Choose the preferred play mode using the multifunction controller and push the ENTER button. Remote controller operation Use the remote controller to adjust the following items.
CAR PHONE OR CB RADIO controller and tilt the joystick to the right or left. Push the BACK button on the remote controller to apply the settings and return to the previous display. To return the adjustment levels to the default value, select “Execute” next to “Initialization” using the joystick on the remote controller and push the ENTER button. The “Execute” key is deactivated when the picture mode settings are already in the default value.
Bluetooth® HANDS-FREE PHONE SYSTEM (models with navigation system) CAUTION . Keep the antenna as far away as possible from the electronic control modules. . Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness. . Adjust the antenna standing-wave ratio as recommended by the manufacturer. . Connect the ground wire from the CB radio chassis to the body. . For details, consult a NISSAN dealer. WARNING . .
. . . . . Set up the wireless connection between a compatible cellular phone and the in-vehicle phone module before using the Bluetooth® Hands-Free Phone System. Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module. Please visit www.nissanusa.com/bluetooth for a recommended phone list. You will not be able to use a hands-free phone under the following conditions: — Your vehicle is outside of the telephone service area.
Bluetooth trademark: Bluetooth® is a trademark owned by Bluetooth SIG, Inc., and licensed to Clarion Co., Ltd. VOICE COMMANDS You can use voice commands to operate various Bluetooth® Hands-Free Phone System features using the NISSAN Voice Recognition system. For more details, see “NISSAN voice recognition system (models with navigation system)” (P.4-137). SAA3603 CONTROL BUTTONS 1.
PHONE SELECTION Up to 5 cellular phones can be registered to the system. To switch to connect another cellular phone, push button and select the “Connected Phones” key. The registered cellular phones are shown on the list. If you select a cellular phone that is different from the one currently connected, the newly selected phone will be connected to the system. QUICK DIAL SAA2520 2. When a PIN code appears on the screen, operate the compatible Bluetooth® cellular phone to enter the PIN code.
instead of “Enter Number by Keypad” in step 3. . . JVH0475X JVH0476X 3. Choose the method for entering the phonebook entry. For this example, select “Enter Number by Keypad”. 5. Select the “Voicetag” key to record a name to speak when using the NISSAN Voice Recognition system. 4. Input the name and phone number manually using the keypad displayed on the screen. (See “How to use touch screen (models with navigation system)” (P.4-5).) 6.
allow easy dialing using the NISSAN Voice Recognition system. (See “NISSAN voice recognition system (models with navigation system)” (P.4-137).) To delete an entry, select the “Delete” key at step 3. JVH0477X Editing the Quick Dial JVH0478X The following editing items are available: button and select the “Quick . 2. Select the desired entry from the displayed list. . 1. Push the Dial” key. 3. Select the “Edit” key. 4. Select the desired item to change. . . .
. . . Quick Dial Select an entry stored in the Quick Dial. Call History Select an outgoing, incoming or missed call downloaded from your cell phone (depending on your phone’s compatibility). Dial Number Input the phone number manually using the keypad displayed on the screen. (See “How to use touch screen (models with navigation system)” (P.4-5).) JVH0479X SAA2525 MAKING A CALL RECEIVING A CALL To make a call, follow this procedure.
. a) b) . Reject Call Reject an incoming call. To finish the call, perform one of the following procedures listed below. Select the “Hang up” key. Push the button on the steering wheel. SAA3587 DURING A CALL There are some options available during a call. Select one of the following displayed on the screen if necessary. . . . . Cancel Mute This will appear after “Mute” is selected. Mute will be canceled. . Switch Call* Select “Switch Call” to answer another incoming call.
Delete Quick Dial Auto Downloaded The Quick Dial entries can be deleted all at the same time or one by one. When this item is activated, the phonebook of a hands-free phone is automatically downloaded at the same time that the hands-free phone is connected. Download Phonebook Download the contacts registered in a Bluetooth® cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies according to each cellular phone.
TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution 1. Ensure that the command is valid. (See “NISSAN voice recognition system (models with navigation system)” (P.4137).) 2. Ensure that the command is spoken after the tone.
Bluetooth® HANDS-FREE PHONE SYSTEM (models without navigation system) (if so equipped) pushed to the ON position with the connected cellular phone turned on and carried in the vehicle. WARNING . . You can connect up to 5 different Bluetooth® cellular phones in the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Use a phone after stopping your vehicle in a safe location.
. . . . — Your vehicle is outside of the telephone service area. — Your vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area. — Your cellular phone is locked to prevent it from being dialed. When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice during a call.
Bluetooth trademark: Bluetooth® is a trademark owned by Bluetooth SIG, Inc., and licensed to Visteon Corporation. USING THE SYSTEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth® HandsFree Phone System. If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation. Initialization When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initialized, which may take up to one minute.
How to say numbers NISSAN Voice Recognition requires a certain way to speak numbers in voice commands. Refer to the rules and examples below. . . . Either “zero” or “oh” can be used for “0”. Example: 1-800-662-6200 — “One eight oh oh six six two six two oh oh”, or — “One eight zero zero six six two six two oh oh” Words can be used for the first 4 digits places only.
the voice recognition system at any time. GETTING STARTED The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to “List of voice commands” (P.4-130). Choosing a language For models with center multi-function control panel: SAA1858 CONTROL BUTTONS The control buttons for the Bluetooth® HandsFree Phone System are located on the steering wheel.
If the name is too long or too short, the system tells you, then prompts you for a name again. 1. Push the button on the steering wheel. The system announces the available commands. A . The system 2. Say: “Connect Phone” * acknowledges the command and announces the next set of available commands. B . The system acknowl3. Say: “Add phone” * edges the command and asks you to initiate C . pairing from the phone handset * The connecting procedure of the cellular phone varies according to each cellular phone.
LIST OF VOICE COMMANDS the system is waiting for a response. Call to call. Refer to “Making a call by entering a phone number” (P.4-129) for more details. “Redial” C * Use the Redial command to call the last number that was dialed. The system acknowledges the command, repeats the number and begins dialing. When you push and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu.
commands. . . . . . “Help” — The system announces the available commands. “Go back/Correction” — The system announces “Go back,” ends the VR session and returns to the call. “Cancel/Quit” — The system announces “Cancel,” ends the VR session and returns to the call. “Send/Enter/Call/Dial” — Use the Send command to enter numbers, “*” or “#” during a call. For example, if you were directed to dial an extension by an automated system: Say: “Send one two three four.
Phone B. number. “Delete Entry” B * “List names” Use the Delete Entry command to delete one entry from the phonebook. After the system acknowledges a command, say the name to delete or say “List Names” to choose an entry. “List Names” C * Use the List Names command to hear all the names in the phonebook. The system recites the phonebook entries but does not include the actual phone numbers. When playback of the list is complete, the system returns to the main menu.
“Previous Name” D * Use the Previous Name command to move the previous name of list. Recent Calls C * Connect Phone “Delete Phone” NOTE: Use the Delete Phone command to delete a phone that is connected to the vehicle. The system will list the names assigned to each phone and then prompt you for the phone you wish to delete. Deleting a phone from the vehicle will also delete that phonebook for that phone. Add Phone command is not available when the vehicle is moving.
Training procedure 1. Position the vehicle in a reasonably quiet outdoor location. 10. The system will announce that speaker adaptation has been completed and the system is ready. 2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in Park. The SA mode will stop if: 3. Press and hold the 5 seconds. . . button for more than 4.
. . .
TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom The system fails to interpret the command correctly. Solution 1. Ensure that the command is valid. See “List of voice commands” (P.4-130). 2. Ensure that the command is spoken after the tone. 3.
NISSAN VOICE RECOGNITION SYSTEM (models with navigation system) NISSAN Voice Recognition allows hands-free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always shown on the display and announced by the system. You can complete your desired operation by simply following the prompts given by the system. (See “NISSAN voice recognition standard mode” (P.4-137) for details.
. SAA2530 4. Select the “Alternate Command Mode” key. 5. The indicator turns off and the Standard Mode activates. SAA2531 1. Push the INFO button on the instrument panel. 2. Select the “Others” key. Displaying user guide 3. Select the “Voice Recognition” key. If you use the NISSAN Voice Recognition system for the first time or you do not know how to operate it, you can display the User Guide for confirmation. 4. Select the “User Guide” key.
SAA2532 SAA2534 SAA2533 Getting Started Let’s Practice Useful tips for correct operation Before using the NISSAN Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide. This mode helps learn how to use the NISSAN Voice Recognition system. You can display useful speaking tips to help the system recognize your voice commands correctly. 1. Select the “Getting Started” key. 2.
USING THE SYSTEM Selecting the “Help” key can display the detailed information of the each command. Initialization When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initialized, which may take up to one minute. When completed, the system is ready to accept voice commands. If the TALK switch is pushed before the initialization completes, the display will show the message: “System not ready.” or a beep sounds.
How to speak numbers: NISSAN Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.) Examples . 1-800-662-6200 — “One eight zero zero six six two six two zero zero” Improving Recognition of Phone numbers “zero” for the number “0 (zero)”, “oh” for the letter “o (oh)”.
Command List Category Command: Command Action Call (Optional) Makes a call to a contact that is stored in either phonebook. Please say “Call” followed by a stored name. Phone Operates the Phone function. Navigation Operates the Navigation function. Information Displays the vehicle Information function. Audio Operates the Audio function. Help Displays User Guide . Phone Command: Command Action Dial Number Makes a call to a spoken phone number up to 10 digits.
. Navigation Command: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location. Address Book Searches for stored information in the Address Book. Previous Destinations Sets a route to a previous destination. .
Voice command examples To use the NISSAN Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here. For navigation system commands, see the separate Navigation System Owner’s Manual. SAA1859 Example 1 - Placing a call to the phone number 800-662-6200: switch located on the 1. Push the TALK steering wheel. You will hear a prompt. 2.
SAA2537 4. Speak “8 0 0”. Selecting the “Manual Controls” key switches the screen to the keypad to input the phone number manually. SAA2538 SAA2539 5. The system announces, “Please say the next three digits or dial, or say change number.” 7. The system announces, “Please say the last four digits” or say change number. 6. Speak “6 6 2”. 8. Speak “6 2 0 0”.
. . . SAA2540 this command. Please use the “International Call” command for all other formats. If you say “Change Number” during phone number entry, the system will automatically request that you repeat the number using the 3-3-4 format. In this case please say the area code first and then follow the prompts. Do not add a “1” in front of the area code when speaking phone numbers. If the system does not recognize your command, please try repeating the command using a natural voice.
JVH0481X 3. Speak “International Call”. SAA2541 4. Speak “011811112223333”. SAA2542 5. Speak “Dial”. 6. System makes a call to 011-81-111-2223333. Note: Any digit input format is available in the International Number input process.
NISSAN VOICE RECOGNITION ALTERNATE COMMAND MODE The following section is applicable when Alternate Command Mode is activated. When Alternate Command Mode is activated, an expanded list of commands can be used after pressing the TALK switch. In this mode, available commands are not fully shown on the display or prompted. Review the expanded command list when this mode is active. See examples of Alternate Command Mode screens.
SAA2544 1. Push the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Command List” key. SAA2545 5. Select a category from the list. JVH0483X 6. Select an item. 7. If necessary, scroll the screen using the multi-function controller to view the entire list. 8. Press the BACK button to return to the previous screen.
Command List Phone Commands: Command Dial Number Action Makes a call to a spoken phone number. Quick Dial Makes a call to a contact that is stored in the Quick Dial. Phonebook Call History Makes a call to a contact that is stored in the mobile phone. Incoming Calls Makes a call to the incoming call number. Outgoing Calls Makes a call to the dialed number. Missed Calls Makes a call to the Missed calls number.
Navigation Commands: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location. Address Book Searches for stored information in the Address Book. Previous Destinations Sets a route to a previous destination. Previous Start Point Sets a route to a previous starting point.
Information Commands: Command Fuel Economy Action Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location. Traffic Information Turns the traffic information system ON and OFF. Weather Information Displays weather information. Weather Map Displays a weather map.
Audio Commands: Command Action CD Starts to play a CD. FM Turns to the FM band, selecting the station last played. AM Turns to the AM band, selecting the station last played. XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played. USB Turns on the USB memory. Bluetooth Audio Turns on the Bluetooth® audio player. AUX Turns on the AUX. Help Commands: Command Command List Navigation Commands Action Displays the navigation command list.
SAA2547 Displaying user guide You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “Others” key using the multifunction controller and push the ENTER button. 3. Highlight the “Voice Recognition” key using the multi-function controller and push the ENTER button. settings.
. Speak in a natural voice without pausing between words. SAA1859 Giving voice command 1. Push and release the TALK located on the steering wheel. switch 2. A list of commands appears on the screen, and the system announces, “Please say a command”. 3. After the tone sounds and the icon on the screen changes from to , speak a command. Operating tips: . Voice commands cannot be accepted when . the icon is . The list displayed can be scrolled by tilting the menu control switch on the steering wheel. .
General rule Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot. Phone numbers Speak phone numbers according to the following examples: . 1-800-662-6200 — “Dial one eight zero zero six six two six two zero zero.” Note 1: For the best voice recognition phone dialing results, say phone numbers as single digits. Send digits using dial tone: . Press the TALK switch during a phone call. .
SAA2550 4. Select the user whose voice is memorized by the system. 5. Select the “Start Speaker Adaptation Learning” key. SAA2551 6. Select a category to be learned by the system from the following list. . Phone Commands . Navigation Commands . Information Commands . Audio Commands . Help Commands The voice commands in the category are displayed. 7. Select a voice command and then push the ENTER button. The voice recognition system starts. SAA2552 8.
Minimize voice feedback (for Alternate Command Mode) To minimize the voice feedback from the system, perform the following steps. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Minimize Voice Feedback” key. SAA2553 5. The setting is turned on and the voice guidance will now be reduced when using the Voice Recognition system.
TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message The system fails to interpret the command correctly. Solution 1. Ensure that the command format is valid, see “Command List” (P.4-150). 2.
MEMO 4-160 Monitor, heater, air conditioner, audio, phone and voice recognition systems
5 Starting and driving Precautions when starting and driving ................................ 5-2 Exhaust gas (carbon monoxide) ...................................... 5-2 Three-way catalyst .............................................................. 5-3 Tire Pressure Monitoring System (TPMS) .................... 5-3 Avoiding collision and rollover ......................................... 5-6 Off-road recovery ................................................................ 5-7 Rapid air pressure loss ..
PRECAUTIONS WHEN STARTING AND DRIVING EXHAUST GAS (carbon monoxide) WARNING . . 5-2 WARNING Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
system, underbody, or rear of the vehicle. haust pollutants. . Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not keep driving if the engine misfires, or if noticeable loss of performance or other unusual operating conditions are detected. Have the vehicle inspected promptly by a NISSAN dealer. . Avoid driving with an extremely low fuel level.
pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
FCC Notice: the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. (See “Flat tire” (P.6-3) for changing a flat tire.) . . . When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute.
TPMS with Easy Fill Tire Alert When adding air to an under-inflated tire, the TPMS with Easy Fill Tire Alert provides visual and audible signals outside the vehicle to help you inflate the tires to the recommended COLD tire pressure. Vehicle set-up: 1. Park the vehicle in a safe and level place. 2. Apply the parking brake and place the shift lever in the P (Park) position. 3. Place the ignition switch in the ON position. Do not start the engine. Operation: 1. Add air to the tire. 2.
significantly more likely to be injured or killed than a person properly wearing a seat belt. OFF-ROAD RECOVERY If the right side or left side wheels leave the road surface, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic. 1. Remain calm and do not overreact. 2. Do not apply the brakes. 3.
PUSH-BUTTON IGNITION SWITCH 6. Turn on the hazard warning flashers and either contact a roadside emergency service to change the tire or see “Changing a flat tire” (P.6-3). DRINKING ALCOHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others.
. . Never leave the Intelligent Key inside the vehicle when you leave the vehicle. . . The cargo area is not included in the operating range, but the Intelligent Key may function. If the Intelligent Key is placed on the instrument panel, inside the glove box or door pocket, the Intelligent Key may not function. If the Intelligent Key is placed near the door or window outside the vehicle, the Intelligent Key may function.
until the shift lever is moved to the P (Park) position. PUSH-BUTTON IGNITION SWITCH POSITIONS When the ignition switch cannot be pushed toward the LOCK position, proceed as follows: LOCK (Normal parking position) 1. Move the shift lever into the P (Park) position. 2. Push the ignition switch to the OFF position. (The ignition switch position indicator will not illuminate.) 3. Open the door. The ignition switch will change to the LOCK position.
switch is pushed without depressing the brake pedal, the ignition switch position will change to ACC. CAUTION Do not leave the vehicle with the pushbutton ignition switch in ACC or ON positions when the engine is not running for an extended period. This can discharge the battery. EMERGENCY ENGINE SHUT OFF To shut off the engine in an emergency situation while driving perform the following procedure: . . Rapidly push the push-button ignition switch 3 consecutive times in less that 1.
BEFORE STARTING THE ENGINE STARTING THE ENGINE . 1. Apply the parking brake. . . . . . . . . Make sure the area around the vehicle is clear. Check fluid levels such as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel. Check that all windows and lights are clean. Visually inspect tires for their appearance and condition. Also check tires for proper inflation. Lock all doors. Position seats and adjust head restraints/ headrests.
DRIVING THE VEHICLE NOTE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone chargers, GPS, DVD players, etc.) 2. Vehicle is not driven regularly and/or only driven short distances. In these cases, the battery may need to be charged to maintain battery health. CONTINUOUSLY VARIABLE TRANSMISSION (CVT) 2.
WARNING CAUTION . Except in an emergency, do not shift to the N (Neutral) position while driving. Coasting with the transmission in the N (Neutral) position may cause serious damage to the transmission. . When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose. . Do not downshift abruptly on slippery roads. This may cause a loss of control.
Accelerator downshift — In D position — R (Reverse): Use this position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed and the shift lever button pushed in to move the shift lever from P (Park), N (Neutral) or any driving position to R (Reverse). For passing or hill climbing, fully depress the accelerator pedal to the floor. This shifts the transmission down into a lower gear, depending on the vehicle speed.
B using a 4. Push down the shift lock release * suitable tool. ing condition. If it does not return to its normal operating condition, have a NISSAN dealer check the transmission and repair if necessary. C and move the 5. Push the shift lever button * D shift lever to the N (Neutral) position * while holding down the shift lock release. WARNING When the high fluid temperature protection mode or fail-safe operation occurs, vehicle speed may be gradually reduced.
BLIND SPOT WARNING (BSW) SYSTEM (if so equipped) PARKING BRAKE The Blind Spot Warning (BSW) system can help alert the driver of other vehicles in adjacent lanes when changing lanes. WARNING . Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident. . Do not release the parking brake from outside the vehicle. . Do not use the gear shift in place of the parking brake. When parking, be sure the parking brake is fully engaged. .
WARNING SSD1178 A The BSW system uses radar sensors * installed near the rear bumper to detect other vehicles beside your vehicle in an adjacent lane. SSD1030 Detection zone The radar sensors can detect vehicles on either side of your vehicle within the detection zone shown as illustrated. This detection zone starts from the outside mirror of your vehicle and extends approximately 10 ft (3.0 m) behind the rear bumper, and approximately 10 ft (3.0 m) sideways.
ness of the ambient light. A chime sounds if the radar sensors have already detected vehicles when the driver activates the turn signal. If a vehicle comes into the detection zone after the driver activates the turn signal, then only the BSW indicator light flashes and no chime sounds. (See “BSW driving situations” (P.5-20).
. . . Excessive noise (for example, audio system volume, open vehicle window) will interfere with the chime sound, and it may not be heard. The radar sensors may not be able to detect and activate BSW when certain objects are present such as: — Pedestrians, bicycles, animals — Several types of vehicles such as motorcycles — Oncoming vehicles — Vehicles remaining in the detection zone when you accelerate from a stop (See “BSW driving situations” (P.5-20).
SSD1031 If the driver activates the turn signal, then the BSW indicator light flashes and a chime will sound twice. NOTE: If the driver activates the turn signal before a vehicle enters the detection zone, the BSW indicator light will flash but no chime will sound when the other vehicle is detected. SSD1032 SSD1033 NOTE: Overtaking other vehicles If you accelerate from a stop with a vehicle in the detection zone, the other vehicle may not be detected.
SSD1036 SSD1034 If the driver activates the turn signal while another vehicle is in the detection zone, then the BSW indicator light flashes and a chime will sound twice. 5-22 Starting and driving NOTE: When overtaking several vehicles in a row, the vehicles after the first vehicle may not be detected if they are traveling close together.
BSW temporarily not available . When radar blockage is detected, the BSW system will be turned off automatically, a beep will sound and the BSW system warning light will blink. The BSW system is not available until the condition no longer exists. The radar sensors may be blocked by temporary ambient conditions such as splashing water, mist or fog. The blocked condition may also be caused by objects such as ice, frost or dirt obstructing the radar sensors.
CRUISE CONTROL Radio frequency statement This device complies with part 15 of the FCC Rules and RSS-310 of Industry Canada. PRECAUTIONS ON CRUISE CONTROL . If the cruise control system malfunctions, it will cancel automatically. The CRUISE indicator light on the meter panel will then blink to warn the driver. If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.
. on winding or hilly roads . on slippery roads (rain, snow, ice, etc.) . in very windy areas accelerator pedal. Your vehicle will maintain the set speed. . To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. . The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control.
BREAK-IN SCHEDULE To reset at a faster cruising speed, use one of the following methods: CAUTION . Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. . Push and hold the ACCELERATE/RESUME switch. When the vehicle attains the desired speed, release the switch. . Push, then quickly release the ACCELERATE/RESUME switch. Each time you do this, the set speed will increase by about 1 MPH (1.6 km/h).
INCREASING FUEL ECONOMY . Recirculating the cool air in the cabin when the A/C is on reduces cooling load. 4. Drive at economical speeds and distances. . Observing the speed limit and not exceeding 60 MPH (97 km/h) (where legally allowed) can improve fuel efficiency due to reduced aerodynamic drag. . Maintaining a safe following distance behind other vehicles reduces unnecessary braking. . Safely monitoring traffic to anticipate changes in speed permits reduced braking and smooth acceleration changes. .
PARKING/PARKING ON HILLS SSD0488 and cannot be moved without depressing the foot brake pedal. WARNING . . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park). Failure to do so could cause the vehicle to move unexpectedly or roll away and result in an accident.
HYDRAULIC PUMP ELECTRIC POWER STEERING SYSTEM WARNING . . If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. When the hydraulic pump electric power steering warning light illuminates with the engine running, the power assist for the steering will cease operation. You will still have control of the vehicle, but the steering will be much harder to operate.
ing or downshifting. Abrupt braking or accelerating could cause the wheels to skid and result in an accident. . If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. ANTI-LOCK BRAKING SYSTEM (ABS) WARNING . Wet brakes When the vehicle is washed or driven through water, the brakes may get wet. As a result, your braking distance will be longer and the vehicle may pull to one side during braking.
VEHICLE DYNAMIC CONTROL (VDC) SYSTEM Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or reverse. When the self-test occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and does not indicate a malfunction.
keep the vehicle on the steered path. You may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and indicates that the VDC system is working properly. . Adjust your speed and driving to the road conditions. See “Vehicle Dynamic Control (VDC) warning light” (P.2-16). . If a malfunction occurs in the system, the VDC warning light illuminates in the instrument panel. The VDC system automatically turns off.
COLD WEATHER DRIVING ing light . may illuminate. The VDC system is not a substitute for winter tires or tire chains on a snow covered road. FREEING A FROZEN DOOR LOCK TIRE EQUIPMENT To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry keyfob. SUMMER tires have a tread designed to provide superior performance on dry pavement.
. A sturdy, flat board to be placed under the jack to give it firm support. A shovel to dig the vehicle out of snowdrifts. Extra window washer fluid to refill the reservoir tank. . . . DRIVING ON SNOW OR ICE WARNING . . . . Wet ice (328F, 08C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these conditions. Try to avoid driving on wet ice until the road is salted or sanded.
Ground Fault Interrupt (GFI) protected, grounded 110-VAC outlet. Failure to use the proper extension cord or a grounded outlet can result in a fire or electrical shock and cause serious personal injury.
MEMO 5-36 Starting and driving
6 In case of emergency Hazard warning flasher switch .............................................. 6-2 Emergency engine shut off ..................................................... 6-2 Flat tire ......................................................................................... 6-3 Tire Pressure Monitoring System (TPMS) .................... 6-3 Changing a flat tire ............................................................. 6-3 Jump starting .......................................................
HAZARD WARNING FLASHER SWITCH EMERGENCY ENGINE SHUT OFF to other traffic. . Turn signals do not work when the hazard warning flasher lights are on. The flasher can be actuated with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash.
FLAT TIRE TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSURE warning appears on the dot matrix liquid crystal display, one or more of your tires is significantly under-inflated. If the vehicle is being driven with low tire pressure, the TPMS will activate and warn you of it by the low tire pressure warning light.
. Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. . Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance. MCE0001A Blocking wheels 1 at both the front and Place suitable blocks * back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. JVE0027X WARNING Be sure to block the wheel as the vehicle may move and result in personal injury.
4. Remove tools illustrated. A * and jack B * located as JVE0032X Getting the spare tire The spare tire is located under the center of the vehicle. JVE0031X 1. Lift up the floor carpeting flap behind the front center console to access the spare tire C . lowering mechanism * 2. Loosen the spare tire lowering mechanism C with the wheel nut wrench. * D , turn 3. Using the assembled socket tool * C the spare tire lowering mechanism * counterclockwise as illustrated to lower the spare tire. 4.
5. Remove the hanging plate spare tire. E * Jacking up the vehicle and removing the flat tire from the 6. After removing the spare tire, raise the spare tire cable completely by turning the spare tire lowering mechanism clockwise using the D . tool * WARNING 7. Before moving or jacking up the vehicle, check under the vehicle to make sure the cable is stored properly. . Never get under the vehicle while it is supported only by the jack.
Carefully read the caution label attached to the jack body and the following instructions. SCE0585 Jack-up point 1. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown. The jack should be used on level firm ground.
SCE0504 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. To lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Carefully raise the vehicle until the tire clears the ground. Remove the wheel nuts, and then remove the tire. SCE0039 Installing the spare tire The spare tire is designed for emergency use.
4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle completely. . 5. Securely store the flat tire, jack and tools in the vehicle. Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. . Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose. .
JUMP STARTING . Do not use an impact wrench when tightening or loosening the spare tire lowering mechanism. . When raising the spare tire, tighten the spare tire lowering mechanism until three clicks are heard. . After storing the spare tire, check under the vehicle to make sure it is stored properly. To start your engine with a booster battery, the instructions and precautions below must be followed. WARNING .
. . . 2. Apply the parking brake. Move the shift lever to the P (Park) position. Switch off all unnecessary electrical systems (lights, heater, air conditioner, etc.). Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. 3. Remove vent caps on the battery (if so equipped).
PUSH STARTING 5. Start the engine of the booster vehicle and let it run for a few minutes. B * 6. Keep the engine speed of the booster B at about 2,000 rpm, and start vehicle * A being jump the engine of the vehicle * started. CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, place the ignition switch in the OFF position and wait 10 seconds before trying again. 7.
3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or coolant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. cooling fan can start at any time. 6. After the engine cools down, check the coolant level in the reservoir tank with the engine running. Add coolant to the reservoir tank if necessary. Have your vehicle repaired at a NISSAN dealer.
TOWING YOUR VEHICLE When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. Towing instructions are available from a NISSAN dealer. Local service operators are familiar with the applicable laws and procedures for towing. To assure proper towing and to prevent accidental damage to your vehicle, NISSAN recommends that you have a service operator tow your vehicle.
. When towing a CVT model with the rear wheels on the ground (if you do not use towing dollies): Always release the parking brake. SCE0976 TOWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION .
Pulling a stuck vehicle If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifically for vehicle recovery. Always follow the manufacturer’s instructions for the recovery device. Front: Using a suitable tool wrapped with a cloth, remove the cover from the bumper. SCE0971 Securely install the vehicle recovery hook (stored in the cargo area) as illustrated. Make sure that the hook is properly secured in the original place after use.
. . Pulling devices should be routed so they do not touch any part of the suspension, steering, brake or cooling systems. Pulling devices such as ropes or canvas straps are not recommended for use in vehicle towing or recovery. . Do not spin the tires above 35 MPH (55 km/h). 5. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle. Rocking a stuck vehicle If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1.
MEMO 6-18 In case of emergency
7 Appearance and care Cleaning exterior ....................................................................... Washing ................................................................................. Waxing ................................................................................... Removing spots ................................................................... Underbody ............................................................................. Glass ..........................................
CLEANING EXTERIOR water. In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surface, wash your vehicle as soon as you can: CAUTION . . after a rainfall to prevent possible damage from acid rain . after driving on coastal roads . when contaminants such as soot, bird droppings, tree sap, metal particles or bugs get on the paint surface .
REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory stores. UNDERBODY In areas where road salt is used in winter, the underbody must be cleaned regularly. This will prevent dirt and salt from building up and causing the acceleration of corrosion on the underbody and suspension.
CLEANING INTERIOR TIRE DRESSING NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a compound. This compound may come off the tire while driving and stain the vehicle paint. If you choose to use a tire dressing, take the following precautions: . . . . 7-4 Use a water-based tire dressing.
may damage the lens cover. FLOOR MATS AIR FRESHENERS WARNING Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: To avoid potential pedal interference that may result in a collision or injury: . . NEVER place a floor mat on top of another floor mat in the driver front position. . Use only genuine NISSAN floor mats specifically designed for use in your vehicle model. See your NISSAN dealer for more information.
CORROSION PROTECTION WARNING Do not allow wet seat belts to roll up in the retractor. NEVER use bleach, dye, or chemical solvents to clean the seat belts, since these materials may severely weaken the seat belt webbing. MOST COMMON FACTORS CONTRIBUTING TO VEHICLE CORROSION . . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. Damage to paint and other protective coatings caused by gravel and stone chips or minor traffic accidents.
Temperature Remove dirt with a vacuum cleaner. A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint surfaces. TO PROTECT YOUR VEHICLE FROM CORROSION . Wash and wax your vehicle often to keep the vehicle clean.
MEMO 7-8 Appearance and care
8 Maintenance and do-it-yourself Maintenance requirement ........................................................ 8-2 Scheduled maintenance .................................................... 8-2 General maintenance ......................................................... 8-2 Where to go for service .................................................... 8-2 General maintenance ............................................................... 8-2 Explanation of maintenance items ...............................
MAINTENANCE REQUIREMENT GENERAL MAINTENANCE These checks or inspections can be done by yourself, a qualified technician or, if you prefer, a NISSAN dealer. Some day-to-day and regular maintenance is essential to maintain your vehicle’s good mechanical condition, as well as its emission and engine performance. WHERE TO GO FOR SERVICE It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.
Windshield defroster: Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washer operate properly and that the wipers do not streak. Under the hood and vehicle The maintenance items listed here should be checked periodically (for example, each time you check the engine oil or refuel). Battery*: Check the fluid level in each cell.
MAINTENANCE PRECAUTIONS When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions which should be closely observed. . . WARNING . Park the vehicle on a level surface, apply the parking brake securely and block the wheels to prevent the vehicle from moving. Move the shift lever to P (Park). .
ENGINE COMPARTMENT CHECK LOCATIONS affect warranty coverage. If in doubt about any servicing, we recommend that it be done by a NISSAN dealer. SDI2715 VQ35DE ENGINE 1. 2. 3. 4. 5. 6. 8-6 Maintenance and do-it-yourself Power steering fluid reservoir Drive belt location Engine oil filler cap Brake fluid reservoir Air cleaner Fuse/fusible link holder 7. 8. 9. 10. 11.
ENGINE COOLING SYSTEM The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary. WARNING . Never remove the radiator or coolant reservoir cap when the engine is hot. Wait until the engine and radiator cool down.
ENGINE OIL CHANGING ENGINE COOLANT Major cooling system repairs should be performed by a NISSAN dealer. The service procedures can be found in the appropriate NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheating. WARNING SDI2691 CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below 2 , open the reservoir cap and the MIN level * 1 .
opening. Do not overfill 3 . * 6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the breakin period, depending on the severity of operating conditions. CAUTION Oil level should be checked regularly. Operating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by the warranty. 4. Raise and support the vehicle using a suitable floor jack and safety jack stands. .
CAUTION Be careful not to burn yourself, as the engine oil is hot. . Waste oil must be disposed of properly. . Check your local regulations. Perform steps 4 to 9 when the engine oil filter change is needed. 4. Remove the plastic cover over the oil filter location by removing the small plastic clips as illustrated. C 5. Loosen the oil filter * with an oil filter wrench. Remove the oil filter by turning it by hand. 6. Wipe the engine oil filter mounting surface with a clean rag.
CONTINUOUSLY VARIABLE TRANSMISSION (CVT) FLUID 13. Turn the engine off and wait more than 10 minutes. Check the oil level with the dipstick. Add engine oil if necessary. After the operation 1. Lower the vehicle carefully to the ground. 2. Dispose of waste oil and filter properly. WARNING . Prolonged and repeated contact with used engine oil may cause skin cancer. . Try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. .
BRAKE FLUID CAUTION . Do not overfill. . Use of a power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly. For additional brake fluid information, see “Capacities and recommended fuel/lubricants” (P.9-2) of this manual. WARNING . Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the brake system. The use of improper fluids can damage the brake system and affect the vehicle’s stopping ability. .
WINDOW WASHER FLUID BATTERY Recommended fluid: Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent CAUTION . . Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reservoir tank. .
contact your skin, eyes, fabrics, or painted surfaces. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 15 minutes and seek medical attention. . . Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the battery which can generate heat, reduce battery life, and in some cases lead to an explosion.
VARIABLE VOLTAGE CONTROL SYSTEM DRIVE BELT JUMP STARTING If jump starting is necessary, see “Jump starting” (P.6-10). If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN dealer. CAUTION . Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely. . Use electrical accessories with the engine running to avoid discharging the vehicle battery.
SPARK PLUGS 2. Have the belt condition checked regularly. WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs. SDI2020 REPLACING SPARK PLUGS If replacement is required, see a NISSAN dealer for servicing.
AIR CLEANER WINDSHIELD WIPER BLADES isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed. . SDI2180 Pull the tabs 1 * and pull out the cover 2 . * The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Maintenance Guide”.
REPLACING CAUTION . After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. . Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure. SDI2694 Type A Replace the wiper blades if they are worn. 1. Pull the wiper arm.When lifting the wiper arm, lift the driver’s side first, then the passenger’s side. Otherwise, the wiper blades may be scratched and may cause damage. 1 and then move the 2.
SDI1649 Type B replacement. Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. When lifting the wiper arm, lift the driver’s side first, then the passenger’s side. Otherwise, the wiper blades may be scratched and may cause damage. A , and then 2. Push and hold the release tab * move the wiper blade down the wiper arm to 1 . remove * 3. Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place. SDI2693 WASHER NOZZLE A .
REAR WINDOW WIPER BLADE BRAKES Contact a NISSAN dealer if checking or replacement is required. If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. SELF-ADJUSTING BRAKES Your vehicle is equipped with self-adjusting brakes. The disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to normal. BRAKE PAD WEAR WARNING The disc brake pads have audible wear warnings.
FUSES 2. Open the engine hood. 3. Remove the fuse/fusible link holder cover by 1 . pushing the tab * 4. Remove the fuse with the fuse puller located in the passenger compartment fuse box. SDI2181 ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. SDI1754 A , replace it with a new 5.
JVM0187X PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are turned off. 8-22 Maintenance and do-it-yourself 1 . * 2 . Remove the fuse with the fuse puller * SDI2704 2. Pull to remove the fuse box cover Extended storage fuse switch 3.
INTELLIGENT KEY BATTERY REPLACEMENT NOTE: If the extended storage fuse switch malfunctions, or if the fuse is open, it is not necessary to replace the switch. In this case, remove the extended storage fuse switch and replace it with a new fuse of the same rating. How to remove the extended storage fuse switch: 1. To remove the extended storage fuse switch, be sure the ignition switch is in the OFF or LOCK position. CAUTION Be careful not to allow children to swallow the battery and removed parts. 2.
may cause undesired operation. 3. Replace the battery with a new one. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Recommended battery: CR2025 or equivalent . Do not touch the internal circuit and electric terminals as doing so could cause a malfunction. . Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity. .
LIGHTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
HEADLIGHTS Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. Halogen headlight model: The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. CAUTION . Do not leave the bulb out of the headlight reflector for a long period of time.
EXTERIOR AND INTERIOR LIGHTS Item Replacement procedures Wattage (W) Bulb No.
SDI2200 Front side marker light 1. Remove the rubber cover. 2. Remove the bulb as illustrated.
SDI1500B SDI2030 Cargo light Front map light SDI2032 SDI2031 Rear personal light Vanity mirror light Maintenance and do-it-yourself 8-29
WHEELS AND TIRES If you have a flat tire, see “Flat tire” (P.6-3). TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSURE warning appears on the dot matrix liquid crystal display, one or more of your tires is significantly under-inflated.
“Tire Safety Information” (Canada) in the Warranty Information Booklet. SDI2197 Tire and Loading Information label 1 * 2 * Seating capacity: The maximum number of occupants that can be seated in the vehicle. Vehicle load limit: See “Vehicle loading information” (P.9-12). 3 * 4 * Original size: The size of the tires originally installed on the vehicle at the factory. Cold tire pressure: Inflate the tires to this pressure when the tires are cold.
5 * 6 * hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle’s GVWR. Tire size — see “Tire labeling” (P.833). Spare tire size or compact spare tire size (if so equipped) tion shown on the Tire and Loading Information label. 5. Add air to the tire as needed.
SIZE COLD TIRE INFLATION PRESSURE P225/65R16 FRONT 99T ORIGINAL TIRE P235/55R18 99T 240 kPa, 35 PSI P225/65R16 REAR 99T ORIGINAL TIRE P235/55R18 99T 240 kPa, 35 PSI T135/80D16 101M 420 kPa, 60 PSI 420 kPa, 60 PSI SPARE TIRE T135/90D16 102M 240 kPa, 35 PSI 240 kPa, 35 PSI SDI1575 SDI1606 Example TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires.
5. Two-digit number (16): This number is the wheel or rim diameter in inches. 6. Two- or three-digit number (94): This number is the tire’s load index. It is a measurement of how much weight each tire can support. You may not find this information on all tires because it is not required by law. 7. H: Tire speed rating. You should not drive the vehicle faster than the tire speed rating. 5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and year the tire was built.
load rating as the factory installed tire. 6 * Term of “tubeless” or “tube type” Indicates whether the tire requires an inner tube (“tube type”) or not (“tubeless”). 7 * TYPES OF TIRES WARNING . The word “radial” The word “radial” is shown, if the tire has radial structure. 8 * Manufacturer or brand name Manufacturer or brand name is shown.
match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels. For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires.
a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damaged and/or vehicle handling and performance may be adversely affected. It is recommended that wheel nuts be tightened to the specification at each tire rotation interval. WARNING .
. The original tires have built-in tread wear indicators. When wear indicators are visible, the tire(s) should be replaced. SDI1663 Tire wear and damage 1. 2. Wear indicator Wear indicator location mark WARNING . Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced. 8-38 Maintenance and do-it-yourself . Tires degrade with age and use.
been repaired. Such wheels or tires could have structural damage and could fail without warning. Care of wheels . The use of retread tire is not recommended. Spare tire . For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. accident and personal injury. . . . . If the wheels are changed for any reason, always replace with wheels which have the same off-set dimension.
4.2 bar). Always keep the pressure of the full size spare tire (if so equipped) at the recommended pressure for standard tires, as indicated on the Tire and Loading Information label. . With the TEMPORARY USE ONLY spare tire installed do not drive your vehicle at speeds faster than 50 MPH (80 km/h). . When driving on roads covered with snow or ice, the TEMPORARY USE ONLY spare tire should be used on the rear wheels and original tire used on the front wheels (drive wheels).
9 Technical and consumer information Capacities and recommended fuel/lubricants ................... 9-2 Fuel information ................................................................... 9-3 Engine oil and oil filter recommendation ....................... 9-5 Air conditioning system refrigerant and lubricant recommendations ............................................... 9-6 Specifications ............................................................................. 9-7 Engine ............................
CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity. US measure 20 gal Fuel Capacity (Approximate) Imp measure 16-5/8 gal Liter 75.6 Engine oil Drain and refill With oil filter change 4-7/8 qt 4 qt 4.6 Without oil filter change 4-1/2 qt 3-3/4 qt 4.
FUEL INFORMATION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). CAUTION . . . . Using a fuel other than that specified could adversely affect the emission control system, and may also affect warranty coverage. Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. Do not use E-15 or E-85 fuel in your vehicle. Your vehicle is not designed to run on E-15 or E-85 fuel.
blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in NISSAN vehicles. If any driveability problems such as engine stalling and difficult hot-starting are experienced after using oxygenate-blend fuels, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. Take care not to spill gasoline during refueling. Gasoline containing oxygenates can cause paint damage.
Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage. Selecting the correct oil filter JVT0159X 1. API certification mark 2.
interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes. . repeated short distance driving at cold outside temperatures . driving in dusty conditions . extensive idling . towing a trailer . stop and go commuting Refer to the “NISSAN Service and Maintenance Guide” for the maintenance schedule.
SPECIFICATIONS WHEELS AND TIRES ENGINE Model VQ35DE Type Gasoline, 4-cycle 6-cylinder, V-slanted at 608 3.760 6 3.205 (95.5 6 81.4) 213.45 (3,498) 1-2-3-4-5-6 Cylinder arrangement Bore 6 Stroke Displacement Firing order in (mm) cu in (cm3) Idle speed Ignition timing (B.T.D.C.) rpm Spark plug Standard FXE22HR-11 Spark plug gap (Normal) in (mm) 0.043 (1.1) Timing chain Camshaft operation degree/rpm No adjustment is necessary. Road wheel Type Size Steel 16 6 6-1/2JJ Offset in (mm) 1.
WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY DIMENSIONS AND WEIGHTS Overall length in (mm) 200.8 (5,100)*1 201.2 (5,110)*2 Overall width in (mm) 77.6 (1,970) Overall height without roof rack rail in (mm) 71.5 (1,815) Overall height with roof rack rail in (mm) 73.0 (1,855) Front tread in (mm) 68.1 (1,730)*3 67.7 (1,720)*4 Rear tread in (mm) 68.1 (1,730)*3 67.7 (1,720)*4 Wheelbase in (mm) 118.
STI0802 VEHICLE IDENTIFICATION NUMBER (chassis number) The vehicle identification number is located as shown. Remove the cover to access the number. STI0562 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0448 F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL The Federal/Canadian Motor Vehicle Safety Standards (F.M.V.S.S./C.M.V.S.S.) certification label is affixed as shown.
STI0815 STI0494 STI0803 EMISSION CONTROL INFORMATION LABEL TIRE AND LOADING INFORMATION LABEL AIR CONDITIONER SPECIFICATION LABEL The emission control information label is attached as shown. The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. The air conditioner specification label is attached as shown.
INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate. Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . Screw 6 2 (for license plate bracket) 1. Park the vehicle on flat, level ground. A on the license plate 2. Line up the tab * bracket under the top of the front bumper B . * 3. Install the license plate bracket with screws. 4. Install the license plate with screws (sold separately).
VEHICLE LOADING INFORMATION . WARNING . . . It is extremely dangerous to ride in a cargo area inside the vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly. TERMS It is important to familiarize yourself with the following terms before loading your vehicle: .
STI0445 Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the XXX amount equals 1400 lbs.
6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. (See “Measurement of weights” (P.9-15).) Also check tires for proper inflation pressures. See the Tire and Loading Information label.
TOWING A TRAILER WARNING . . . Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles.
outside temperatures on graded roads can affect engine performance and cause overheating. The transmission high fluid temperature protection mode, which helps reduce the chance of transmission damage, could activate and automatically decrease engine power. Vehicle speed may decrease under high load. Plan your trip carefully to account for trailer and vehicle load, weather and road conditions. guide includes information on trailer towing capability and the special equipment required for proper towing.
by NISSAN warranties. STI0542 Tongue load When using a weight carrying or a weight distributing hitch, keep the tongue load between 10 to 15% of the total trailer load within the maximum tongue load limits shown in the following “Towing Load/Specification” chart. If the tongue load becomes excessive, rearrange cargo to allow for proper tongue load.
required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighed to confirm the vehicle is within the GVWR, Front GAWR, Rear GAWR, Gross Combined Weight Rating (GCWR) and Towing capacity.
Always verify that available capacities are within the required ratings. TOWING LOAD/SPECIFICATION TOWING LOAD/SPECIFICATION CHART Unit: lb (kg) MODEL WEIGHT MAXIMUM TRAILER WEIGHT*1 MAXIMUM TONGUE LOAD GROSS COMBINED WEIGHT RATING RECOMMENDED EQUIPMENT*2 1: 2: VQ35DE CVT 3,500 (1,588) 350 (159) 8,500 (3,856) Sway Control Device (SCD) All towing above 1,000 lb (454 kg) requires the use of trailer brakes. NISSAN recommends the use of a tandem axle trailer whenever towing above 3,000 lb (1,361 kg).
TOWING SAFETY . Trailer hitch . Choose a proper hitch for your vehicle and trailer. A genuine NISSAN trailer hitch is available from a NISSAN dealer. Make sure the trailer hitch is securely attached to the vehicle to help avoid personal injury or property damage due to sway caused by crosswinds, rough road surfaces or passing trucks. WARNING Trailer hitch components have specific weight ratings. Your vehicle may be capable of towing a trailer heavier than the weight rating of the hitch components.
is removed, seal the bolt holes to prevent exhaust fumes, water or dust from entering the passenger compartment. . Regularly check that all trailer hitch mounting bolts are securely mounted. Tire pressures . When towing a trailer, inflate the vehicle tires to the recommended cold tire pressure indicated on the Tire and Loading Information label. . Trailer tire condition, size, load rating and proper inflation pressure should be in accordance with the trailer and tire manufacturers’ specifications.
. . . Check your hitch, trailer tire pressure, vehicle tire pressure, trailer light operation, and trailer wheel lug nuts every time you attach a trailer to the vehicle. Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before driving the vehicle. Determine the overall height of the vehicle and trailer so the required clearance is known.
. Have your vehicle serviced more often than at intervals specified in the recommended maintenance schedule in the NISSAN Service and Maintenance Guide. . When making a turn, your trailer wheels will be closer to the inside of the turn than your vehicle wheels. To compensate for this, make a larger than normal turning radius during the turn. . Crosswinds and rough roads will adversely affect vehicle/trailer handling, possibly causing vehicle sway.
UNIFORM TIRE QUALITY GRADING FLAT TOWING Towing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION . Failure to follow these guidelines can result in severe transmission damage. . Whenever flat towing your vehicle, always tow forward, never backward. . DO NOT tow any continuously variable transmission vehicle with all four wheels on the ground (flat towing).
EMISSION CONTROL SYSTEM WARRANTY traction performance. WARNING WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. TEMPERATURE A, B AND C The temperature grades A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
REPORTING SAFETY DEFECTS For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
READINESS FOR INSPECTION/ MAINTENANCE (I/M) TEST Due to legal requirements in some states/areas or provinces, your vehicle may be required to be in what is called the “ready condition” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually, the “ready condition” can be obtained by ordinary usage of the vehicle.
OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory-trained technicians working at NISSAN dealerships. Genuine NISSAN Owner’s Manuals can also be purchased. For USA: For current pricing and availability of genuine NISSAN Service Manuals, contact: 1-800-450-9491 www.nissan-techinfo.
10 Index A A/C (Air Conditioner) operation.............................. 4-42 ABS (Anti-lock Braking System) ............................ 5-30 Advanced air bag system ......................................... 1-52 Aiming control, Headlights........................................ 2-36 Air bag system Advanced air bag system .................................. 1-52 Front passenger air bag and status light....... 1-53 Front-seat mounted side-impact supplemental air bag system ............................
Console box ................................................................. 2-46 Continuously Variable Transmission (CVT) fluid..................................................................... 8-11 Controls, Control panel button.................................. 4-3 Coolant Capacities and recommended fuel/lubricants............................... 9-2 Changing engine coolant...................................... 8-8 Checking engine coolant level............................. 8-8 Corrosion protection....
Fusible links.................................................................. 8-21 G Garage door opener, HomeLink® Universal Transceiver.................................................. 2-59 Gas cap......................................................................... 3-30 Gauge.............................................................................. 2-5 Engine coolant temperature gauge.................... 2-7 Fuel gauge................................................................
Lights, Exterior and interior light replacement..... 8-27 Loading information (See vehicle loading information).................................................... 9-12 Lock Automatic door locks............................................. 3-7 Door locks................................................................. 3-5 Lift gate lock.......................................................... 3-26 Power door lock...................................................... 3-5 Locking with mechanical key.........
FM-AM radio with Compact Disc (CD) player............................................................ 4-71 FM-AM-SAT radio with Compact Disc (CD) player............................................................ 4-79 Rapid air pressure loss................................................ 5-7 Readiness for inspection/maintenance (I/M) test........................................................................ 9-27 Rear personal lights....................................................
Tilt/telescopic steering............................................... 3-32 Tire Pressure, Low tire pressure warning light..... 2-14 Tire replacement indicator................................. 2-22 Tires Flat tire....................................................................... 6-3 Low tire pressure warning system...................... 5-3 Tire and Loading Information label....... 8-31, 9-10 Tire chains.............................................................. 8-36 Tire dressing..................
X Xenon headlights.........................................................
GAS STATION INFORMATION FUEL INFORMATION: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). CAUTION . Using a fuel other than that specified could adversely affect the emission control system, and may also affect warranty coverage. . Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. . Do not use E-15 or E-85 fuel in your vehicle.
Printing : July 2014 (13) Publication No.: OM0E OM14E0L32U2 0E52U1 Printed in U.S.A.
