Operation Manual

To activate the ECO mode, push the ECO switch

䊊

on the right side of the steering wheel. The

“ECO indicator” on the instrument cluster will

illuminate.

To deactivate the ECO mode, push the ECO

switch

䊊

again. The “ECO indicator” on the

instrument cluster will go out.

For additional information, refer to “Electric Shift

Control System” in the “Starting and Driving”

section of this manual

The front seats and the rear outboard seats (if so

equipped) can be warmed by built-in heaters.

The switches, located on the center console and

at the side of the front passenger seatback, can

be operated independently of each other.

1. Place the power switch in the ON position.

2. Push the LO or HI position of the switch, as

desired, depending on the temperature. The

indicator light in the switch will illuminate.

3. To turn off the heater, return the switch to the

level position. Make sure the indicator light

goes off.

Rear (if so equipped)

ECO SWITCH HEATED SEAT SWITCH

Instruments and controls 2-47