User Manual- Air 10s

The NAS system is using an independent identity (ID) function to access

strobes, the NAS strobes will not be affected by other commanders when-

ever they are using the same channel in the same location. A slave unit of

Nissin flash or Nissin receiver can only be controlled by one and only one

NAS commander with pairing in default setting.

Air 10s offers “Open Mode” ,a new function (only works with MG10), on the

pairing setting. Open Mode can let two or more camera using same set

MG10 in one place.

Open Mode (only works with MG10)

1. Hold the button of Nissin Air 10s for 1 seconds,

lights up on lower left corner means Open Mode is on.

Now hold the for 1 seconds again to turn off.

Open Mode Setting