User Manual- Air 10s

Firmware update procedure

To start the firmware update procedure, you need to have:

The computer (Windows or Mac) connected to the Internet

A Micro SD/SDHC card (recommend 4GB-32GB) and Micro SD card reader.

Air 10s with 2pcs of full re-charged AAA batteries.

1. Download the Firmware file(s). Click here to download firmware files:

http: //www.nissindigital.com/firmware.html

2. Insert Micro SD/SDHC card to the card reader and connect to the computer.

3. Format Micro SD/SDHC card under FAT32 format (Please backup before format).

4. Copy all Firmware file(s) to Micro SD/SDHC card.

5. Eject the Micro SD/SDHC and remove from the card reader.

6. Insert AAA batteries into Air10s and switch on it.

7. Then switch off the Air 10s.

8. Remove the Micro SD/SDHC cover of Air 10s, insert the Micro SD/SDHC which

contains the latest firmware update files into the Air 10s.

9. Switch on the Air 10s. A LED light inside the Micro SD card slot of Air 10s will blink,

it will blink and the light will change orange to red and stop blinking once

the update is finished.

10. The green light will emit when the firmware update procedure is completed.

Remove the batteries and remove the Micro SD/SDHC.

11. Insert the batteries again and switch on the Air 10s.

How to check firmware version of Air 10s

Swith on power, press and hold the Power on/off button

for 5 seconds. LCD display will show 2 different

firmware versions. Release the Power button about 2

seconds, firmware version page will disappear and

returns to the front operation page.

Flash Control

Hot Shoe