Instruction Manual

Troubleshooting
Technical Specifications
Receiver Unit
Network Output (LAN) Port 2x RJ45 Connectors @ 1 Gigabit each
Link Port 16 BNC Coax Jacks
Ethernet 16x 100BASE-TX Full Duplex per BNC Coax Jacks
Device Dimensions 1 RU x 12.0"D
Operating Temperature 0° to 52° C / 32° to 125° F
Humidity Up to 95% non-condensing
Power Requirements IEC380 power connector - 115/230VAC 50/60Hz
Total Power Output 640Watts
PoE Capabilities IEEE 802.3af & IEEE 802.3at complaint per Coax BNC Jack
Mounting Standard rack mounting design
LED Connectivity Indicators Link Status, Power, PoE Out, 10Mb or 100mb
Max Operating Distance 500m/1,600ft
Shipping Weight 12 lbs
PROBLEM POSSIBLE CAUSE
No video/data Check camera and ER16500/ET1500 device connections.
Check Coaxial cable condition and BNC connector terminations.
Check that the camera is powered.
Check that supplied camera power meets manufacturer’s
specifications.
Check cable that cable distances do not exceed PoE capabilities.
Check that Coax and UTP cable lengths does not exceed the
operating distances of the ER16500 & ET1500.
Check link & device status LED.
Video/data loss Check network switch terminations & link status.
Check network routing table.
Confer with site Network Administrator
For Tech Support Call 1-[phone]