User's Manual

- 31 -
1) To input user ID
When user registration menu is selected, you will see the
following screen that waits for the input of user ID. After typing
in an appropriate user ID, please press ENTER. If the same ID
already exists, a failure message will be displayed and the system
goes back to a previous menu.
2) Authority setting
The following explains how to set user authority between
I N P U T I D :
1 2 3 4
User registration is conducted in terminal when the
terminal mode is set at SO. It can be conducted either in
server or in terminal if the mode is set at NL. Note that
terminal registration is possible if network is in normal
operation under the NL mode, but is not possible if network
is disconnected.
To change SO mode into NL mode, user DB in the terminal
should all be erased and re-re
g
istered.
To correct ID during typing, please use a delete button.
It will erase characters one by one or will go back to
a higher menu when no character is input.