User's Manual

- 60 -
3.4.4.3 Wiegand
It decides whether to use Wiegand communication protocol to
send authentication results and user ID to a server.
Please press ENTER to go into a sub menu.
Please decide whether to use Wiegnad protocol or not. When
choosing OFF, item number 2 and 3 will disappear from Wiegand
menu.
When you choose to use Wiegand, you have to select Facility code
for the relevant bit display. If RF is set at 26 bits in the
previous menu, Wiegand should be set at 26 bits. 34 bits RF should
be matched against 34 bits wiegand.
Facility code for 26 bits has values between 1~255.
W I E G A N D
1 2 3 4 5 6 7 8
U s e W i e g a n d ?
1 2 3
U s e W i e g a n d ?
O N / O F F
2 6 b i T
1 2 3