User's Manual

- 31 -
Ｓｅｃｕ． Ｌｅｖｅｌ
１．１：１ Ｍｏｄｅ
（１ － ９）: ５
• 1:N mode
In this mode, you need to input fingerprint only without ID. It is
recommended to set a higher security level in this mode than in
1:1 mode. The default is 8.
Ｓｅｃｕ． Ｌｅｖｅｌ
２．１：Ｎ Ｍｏｄｅ
（１ － ９）: ８
 Capture Mode
『Latent』 prevents recognition error possibly caused by latent
fingerprint image in the fingerprint input window because of sweat
or sebum. 『Intelli』increases recognition performance against dry
finger or wet finger. The initial setting is 『Latent』. Move to the
value you want to choose with the direction keys and press the
Enter key.
C a p t u r e M o d e
In the 1:N mode, if you set the security level too low, the
false acceptance rate may increase, resulted in degrading
security. On the other hand, if you set it too high, the false
rejection rate may increase, resulted in inconvenience.